820 Fencing Contractors in VIC

Front fence is leaning, just need 2 or 3 posts to hold it semi-secure so it doesn't fall

Looking for someone to supply and install wood fence door on side of house, or cover up the space with fence paling wood . Size is 1.4 meter width and hight required 1.8meter Photo is for reference only.

Need someone to give a coating of clear lacquer to roughly 15 meters of 1.8m high bamboo fencing and some clear coat painting on a feature wall in back yard

The Patio need a replacement lattice fence. Approx 120x240. Airtasker price includes the cost of the lattice (from Bunnings or similar)

Exuating post rotted. Need to be dug up and removed. New one installed ans set in concrete. Will upload pics

I need a gate to block a section of the garden, small one day 1.5m length. Also need to repair another garden gates that are broken.

Need a small fence built between my house and neighbours garage, slightly taller than usual due to land slope, nothing fancy, no gate, just a fence.

Need an experienced panel beater to do some welding and panel work on an old valiant from a home garage. Will need to bring your own tools. I'll pay for the welding materials. 2 days work to start with.

to remove the fencing.recently installation

Hit the fencing with the car. Brick layering is required to be done. Majority of the bricks are still intact. Just need to put together.

Hi. The wooden fence is leaning by about 15 degrees, needs support and repair. Wooden Wing gate lock and one of the panels need repair too. Potentially, we may need to move the wing gate to be further back to allow water meter to be outside the boundary and secure the hot water service somehow.

Back fence has a large hole in one of the palings and the bamboo fence cover has fallen down. Wooden sign has fallen off front gate. Please fix both.

need help in programming new gate remote

Need to fix broken fence approximately 25m Labour and material to be supplied by Airtasker See pics

Need someone to fix fence which removed because of building garage on the common boundaries. -The removed fence is available.

Hi, I would like a gate to be made and installed. There are poles with hinges already. I’m looking for a very budget friendly material and nothing fancy. Total length: 3600mm Height: 6-7ft or practical/standard size or something to match or lower than the height of the fence. Thanks.

About to paint this entire fence and just need this one broken plank/piece repaired.

the bottom hinge of the gate has fallen apart, which need to be fixed any additional detail suggested to steady the gate and its post are most welcome and Id prefer a proper job even if extra work hours and material needed Also a timbre post fixed to the pavement has to be removed

The fence (approx 1m wide) between our house and our neighbours has fallen/ snapped due to the old wood. Need someone to replace the fence. As we are unsure what materials will be required, you will need to come and assess and then get the materials required (there are 2 Bunnings' within 5 minutes of our house) Need it done this weekend, any questions just ask

One side of my fence is bending over towards my side. The wood is in perfect condition. I think it just needs new nails and put it straight again.