Find a fence installation professional in Elwood

We would like someone to take down our old fence (discard it) and build the same fence (replace like for like). The fence is approximately 5.28m in length and 1.6m from the ground (you will need to provide materials which will be included in the quote). You can see the length of the fence in the picture. Access is easy. no neighbours to worry about and there is plenty of clearance.

Old timber fence to be replaced with new Fence to be dismantled and left on site Fence runs between two properties

I’m looking for someone who can install a section of boundary fencing that replicates what has been erected previously. the section in question is 6.5m long and would comprise a post and paling fence 2.3m high - this includes 2.1m long palings and 2 x 100mm high timbers along the bottom. Existing timber sizes are as follows : rails - 50 x 70 x 4No. posts - 120 x 70 (length to suit 2.3m high fence) palings - 140mm wide palings plinth boards - 2 x 100mm high include black paint

Pull down pool fence and re Install in different shape. - Due date: Flexible

Replace an existing fence consisting of two parts: timber fence 1.62m high, 15 m long and wire on timber frame 1m high 7.3m long. - Due date: Flexible

We have two dogs that love to run and ruin our garden, I need someone experienced to build a basic fence around 16m. The perimeter is between balcony and garden. The fence will need to be high as the dogs can jump. We don’t really want it to be permanent as we plan on building a rain Forrest style garden. We need expertise as well as labour so please help! - Due date: Flexible

Install timber louvers extended fencing timber screens 13 to be installed average Size 2450 x 400 . All timber louvers provided which need to be fixed on extended fence posts . - Due date: Flexible

Side gate needed for back yard area between 2 brick rendered pillars Swinging into walkway - Due date: Flexible

Hi - we are wanting an experienced fencer to install timber slat to an existing wall structure along our side boundary. The length is around 6-7m. We are happy to pay for materials if you want to quote for the work. - Due date: Flexible

remove existing gate and hinge butts....lever out fence rails...dig around existing gate post and break away concrete footings.....cut post & top / bottom rail to size.....fit new post in wet mix cement/concrete....refit gate with new screws.....cartaway old post..... Total cost Thanks, - Due date: Flexible

Small garden with 3 shared fencing lines approx 12m in length total plus gate replacement - Due date: Flexible

Remove/dispose roller door and build double gates in its place Also pedestrian gate in lattice area Same height as side fence Some Materials available from un needed internal fence (see picks) more than enough pailings Existing metal posts to mount hinges to Must be metal frame and galvanised because we are near beach

Fence to be replaced is 2.2m high and 21.2m long. Removal and disposal of current fence and 6 concrete footings to be included.

After the storm last week our brick fence was damaged, we have removed all the loose bricks, land now need a bricklayer to clean them, and reuse the same bricks to redo the fence. See images attached. Roughly 150 bricks. Open to quotes above the nominated price. Hoping for Mon/Tue/Wed this week. Need it to match grout colour and maybe a final brick clean of the whole fence after so it all ties in nicely.

I’m wanting a basic gate built with a pad lock to match existing fence - see pics. Approximate Measurements: Height: 176cm Width: 140cm

1 shared fence needs replacing, approx. 35m in length.

In a side timber pailing 1.9m fence I need to replace 1 post and 4 x 2.7m base boards. In the rear timber pailing 1.9m fence I need to replace 2 posts and install a concealed timber pailing gate to access the easement. Both jobs need to be quoted and invoiced separately.

The existing keypad is nearly dead (see photo). Needs to be replaced with a new one. The Keypad approx dimensions 12 x 10 cm

Supply and install aluminium slat gate to side of property in Elwood, see photos. We already have one at front Measurements are as follows the gate itself is 860mm wide and 1400mm height, the total width of the void is 1m precisely, Colourbond monument Powder coated aluminium is requested.

I’m after a quote to replace an existing fence. Our fence runs down the drive way along the apartment block, we are only wanting to replace our part of the fence as it is rotten. The fence is aprox 8M in length and we are wanting it aprox 2.5M in height. If you could please email me through a price estimate that would be much appreciated.