Find experienced local fencing contractors in VIC

8m of fence line needs to be replaced beside my driveway. Easy access.

I have low height fence, pretty old one, I want to increase height of fence by modifying existing or changing to complete new one, need advise. Please be mindful $50 is not for job, looking forward for someone to come out and have a look and provide quote asap .

I would like to have a temporary fence in this area from wall to wall with door to go in. From pallets or bamboo panels maybe?

We would like to have a fence installed in the front yard. We prefer the style show in the picture but are open to other ideas. As long as the fence looks strong and secure. Total length should be less than 12 meters. There are some white pillars on the front. Please see pictures. The first picture is just an example of what fence we want. You would need to supply all the materials and have it installed. Date is quite flexible, it would be in late July or early August. Budget is not $100. Please make offer. Thanks.

Install Screens, Dig hole for each pine post, concrete hole after installing pine post, total of 5 or 6 post. must fit and install; garden screens to post (please see images )

Wooden fence in front yard , some posts are Wobbly and horizontal wooden plank are rotting

Aluminium gate 1m x 1m. Existing top rail to be re-ffixed and bottom rail missing and replacement piece required

Need colour bond fencing installed for 12 meters of length and height 2 meters. - the fence posts should be 600mm inside ground and should be properly filled with cement

I need the hinges on my fence rewelded.

I need a boiler maker/welder with experience in metal fencing to install 2 fence panels and a pedestrian gate at the front of the house. Work includes some welding, bracket fixation into metal with screws and metal that needs to be cut/trimmed. 1. Pedestrian gate – 2 sets of hinges to be screwed into the metal post (picture 1). Strike bar to be screwed into the opposite metal post with one part of the metal that requires trimming and a hole created for the gate latch bolt (picture 2). 2. Fence panels (2 panels) to be installed. The fence panel brackets will need to be screwed into the posts (4 brackets). The fence panels are slight wider and require trimming of the overhangs (horizontal bars) prior to attaching to the fence panel brackets. Both panels are attached to the larger post on each side. The other side of these panels are to be joined to the intermediate (smaller) post in the middle. This will require welding (picture 3). 3. The skirting of the posts (3 sets) will need to be welded on the foot of each post (please see picture). There is rear access for parking. There is no parking at the front of the house. Preferable this Saturday (04/05/24) or Sunday (05/05/2024).

Install new fence 4 sections each one is 1.2m, the other three sections are 2.1m.

The backyard fence has tilted and needs to be realigned/fixed.

Want to make two small enclosures for keeping dogs in the salon I have purchased two gates, hinges from Bunnings, need to divide them also unsure what other materials will need to come and see

A side fence gate was removed from the wall. I need to fasten that gate to the wall. And I need to fix 2 wooden strips of a fence to cover a hole in the fence

The wind has brought down part of our fence. We've piled it up on our front yard but would like it taken away. Please note there are nails in the timber. The footprint is approx 5m x 6m. the longest beams are approx 5m long, so may need to be cut up a bit smaller. Also 1 aluminium security door that also needs to be removed.

Need someone with demolition earth breaking hammer to break a small concrete base of the fence post. Not more then 20min job.

Fence support is broken so fence is tilting out .. refer pics for broken fence support . Max 2 mts support needs to be replaced ..

The fence needs to be fixed. 250 meters wide

Install colourbond fence. Woodland grey 2.7x 1.8 Currently a broken timber fence.

Existing brick post at front of property has been dislodged from its original position due to a vehicle nudging it. The post measures 48cm x 35cm x 130cm. Scope : - Rebuild post using existing bricks only, for arsthetic reasons. - All other required materials and tools to be supplied by Airtasker.