Replace existing fan light combo with new unit Must be licensed and with certificate of safety. I am flexible with date - does not have to be Feb 17. Preferably a Tuesday Due date: Flexible

I need some LED Lights installed in my garage to replace existing Fluorescent Tube. Either will be 2 large 125mm LED Downlights, or 4-5 smaller 90mm downlights.

Additional power point next to the toilet bowl for my bidet - Due date: Before Thursday, 29 December 2022

My split system AC unit is developing a musty smell and I need it properly cleaned and sanitised. Both indoor and outdoor units easily accessible though the indoor unit is right above a television set. No shoes allowed indoors as well so will need to be ok with that.

Oven door hinges have broken and no longer hold the oven door open or closed properly. The oven is an Electrolux EUEE63AS*46 - Due date: Before Sunday, 18 December 2022

LG Aircon unit, split system. Requires general service. Easy access to outside part of unit. - Due date: Flexible

I have about 6 or 7 old downlights. I need to replace these ones with new LED downlights. Basically, you need to install a power point/socket for each light and connect new LED downlights with the transformer. - Due date: Before Wednesday, 30 November 2022

Two hard wired interconnected Smoke Alarm Replacement. Connect a single light switch. Just need to connect wires. Need Certificate of Electrical Safety - Due date: Before Wednesday, 12 October 2022

Hi I have around 20 dimmable globes to replace with cool white leds - Due date: Needs to be done on Friday, September 30, 2022

Qualified electrician needed to fix 2 switches one seems to need replacement because i tried to fix it myself 🤦🏻‍♀️ and the other just doesn’t switch in and off easy. - Due date: Needs to be done on Monday, 22 August 2022

inquiries. if I can have an electrician. im planning to buy wireless cctv. i just need someone to install them & have my internet/phone port checked. thanks - Due date: Flexible

1 tube light not working, replaced with new one but still doesn’t turn on Need wiring checked - Due date: Flexible

Please refer to the marked floorplan and provide a quote to: - Relocate NBN point (FTTC) in Bedroom 4 from the wall into the Robe. - 24 port patch panel and 24 port POE switch to be installed on wall mount patch panel bracket (open to advice on this) - Installation of ethernet points and wall plates for each of these spaces: Living (A=6 ports, B=2 ports), Bedroom 3 (C=4 ports, D=2 ports), Bedroom 2 (E=2 ports) and Master Bedroom (F=2 ports). Please advise if you can supply the following: - CAT6A cables and wall plates. - 24 port patch panel - 24 port POE switch - Wall mount patch panel bracket or free standing rack/cabinet/enclosure Note it is a brick double story house with ceramic roof tiles Need this done as soon as possible, happy to discuss. - Due date: Before Monday, 1 August 2022

Hi there, We require a licensed electrician to install a new electric oven where our existing oven perviously was (under bench). See image below for more detail. - Due date: Needs to be done on Tuesday, 19 July 2022

Wire in electric break unit to an FG Falcon Ute

I would like to install a couple of 15 amp power points in the back yard along with a couple 10amp extensions.

I need to draw 2 x new circuit from the breaker and install new power point in each bedrooms. My house was fitted with centralised heating but they are no longer working therefore I need to have individual power points that has its own circuit to take on the load of the heater.

Remove old lights and install 35-40 new downlights. Some new wiring required in bedrooms and upstairs hallway. Double storey tiled roof. Ideally want light cover plates to be replaced to new ones too. Please quote both install only OR install + supply of warm white down lights. Please advise if you can patch (no paint required). Must be a licensed electrician and supply Certificate of Electrical Safety on completion. Job required for empty house in July. Inspection can be arranged end of June. Images of current lights attached and new/replacement locations marked in red on the floorplan. Due date: Early/mid July

Hi I need to pull out two 15 amp of plunges from my main connection. If any electrician can help will be good Thanks It’s very straight forward job just put cables and put plugs box No digging or any major wall drilling Thanks

Date and time is flexible. Need to do the following safety checks for new tenant moving in to meet RTA requirements: - Smoke Alarm Safety - Gas Appliance Safety check or service (with a carbon monoxide check) - Electrical Safety check every two years Location: Clayton, Victoria.