Find experienced local carpenters in Gold Coast

Just need a couple of pelmets made and fitted Either pine or MDF can be pre made or onsite can be easily screwed to ceiling One is 3.5 mtr and other 5 mtr

Remove existing laundry door and add a new one (labour + material) I have references of a door that I would like to add but I am open to professional suggestions.

Need firsge overhead cabinet- i found glass company to match it - just need caninet or handyman to source 2pac cabinet plz When renovating the green circle cabinet was taken out for fridge and thrown.

I had composite decking put down but a few boards have come loose I need to rectify to fix them

Cut down skirting boards to fit existing space Due to plaster wall installed after water leak. Cut down from door due to new timber floor being installed

I need a carpenter to put in a door and create the frame for the door. I also have a little hallway gap that a closet door will be going in over the meter box. Needing that framed also so it can be plastered.

Paid by Hour basis minimum 4hrs @ $45 Reinstall 1 cavity slider door Unjam 1 slider Install 4 stoppers There is more work but Will see how we go.

Hi there! I’m looking for a carpenter or builder to custom build an outdoor wooden booth seating similar to the reference photos attached. Details: - Total length: 6 metres - Design: similar to the reference photos (horizontal timber slats, with backrest and seat) - Material: outdoor-grade timber, suitable for weather exposure - Frame: preferably powder-coated metal base or other durable outdoor-friendly structure - Finish: natural timber look (can discuss stain/seal options) - Location: Mt Nathan, 10 minutes from Nerang. - Access: easy outdoor area, measurements available on site Looking for someone experienced in outdoor furniture or joinery who can measure, build, and install the seating on-site. Please share examples of your previous work or similar projects if available. Budget: Open to quotes depending on material and workmanship quality. Photos attached for reference. Thank you

Looking for an experienced tradesperson to cut and install stainless steel sheets over my bathroom L-shaped benchtop. Precision and clean finish required. Details: • Sheets provided: – 2 × 520 mm × 800 mm – 2 × 660 mm × 820 mm (1mm thick stainless steel) • Benchtop size: approx. 1600 mm × 520 mm + adjoining laundry section • Requires folding over front/sides for clean edge detail • Basin will be removed prior to install • Installer must cut to size and apply adhesive (provided) May require joining or light welding at corner seams for full coverage. Must have experience working with stainless steel and accurate fitting.

Storage spac built under stairs/ laminate on top of stairs

I have an aloe Vera plant that leaned on my blind and stained it. These blinds are black out. The stain is a medium size and yellow/brown in colour. If possible I would like the stain to be fully removed without damaging the black out blinds. Also I need the shower in the bathroom to be cleaned, removing all the mould in it. The mould is in the grout of the shower. Please and thank you! Type of clean: Regular Number of bedrooms: 3 Number of bathrooms: 2 Equipment and supplies: Tasker must provide

Put together an Ikea kitchenette, it's a very basic Knoxhult base (180cm wide) with 2 overhead cabinets. Attach overhead cabinets to the wall as well. No plumbing or electrical works required.

Supply and install a kitchen cabinet door, white is fine, 74cm high x 43cm wide.

Hello I need my stone benchtop removed from my cabinets tomorrow I had someone lined up for today but they cancelled last min and I have a measure up for new bench Friday morning

Kitchen cupboard door missing and some draws. These need to measured and sent for manufacture and then installed. Need an experienced cabinet maker that can do this task. Have more work in the pipeline. We will pay directly for the materials and manufacture. You measure and install once ready

Need 2 small cabinet doors made up with 16mm white mdf or particle board (matt finish) with trim around edges and hinges. Measurements 430W x 425H

We have recently bought a house and would like to install pull out drawers in kitchen cabinets, upgrade laundry room with cabinets, install pull out drawers in bathroom.

Hello, We make bases for an item we sell online. This is 30 x 30 squares. This is from Bunnings and can share the product with you. We just need someone to cut these for us. Need 2 x pine panels done. So need about 20 or so, or how many you can get out of this one. https://www.bunnings.com.au/specrite-2400-x-900-x-33mm-timber-multi-use-pine-panel_p0419614

I had an ILVE Rangehood and am replacing it with a Smeg. It doesn’t fit by 5mm and the cabinet needs to be trimmed and a lip created to place the Rangehood on.

But together a Cozze Stainless Steel Outdoor Table with Shelf. Technical Specification Max. load: 50 kg. Elegant side handles: O19 mm. Pull-out table in stainless steel: 42×35 cm Large sturdy rubber wheels: 7.5 cm. Material: zinc-plated steel Surface: powder-coated Colour: Matte Black Dimensions: 77 x 66.5 x 82.5 cm