Find experienced local carpenters in Windsor

We are after someone who can give our verandah and deck a light sand and couple of coats of stain. Approx 32m2 over 2 areas. See pic for dimensions and back deck area. Don’t have photos of veranda

I need a new decorative piece turned for an Ed Rosenstengel sideboard that has been damaged. About a foot long and 2 inches wide. It’s half-cylindrical so would’ve been made and then cut in half. Would be great to get two if I can. Not very complicated for a pro. Must be silky oak.

Looking for someone with carpentry experience to build a wooden type or feel stage/flooring around my dance pole (x pole lite stage) so I have a smoother finish and more floor room to work with. Would like it to have a sloped edge to give it a nicer finish and for safety with less chance of bumping into it day to day. Will need to be able to be dismantled and put back together again incase i need to move or dismantle or transport my pole. Needs to be at-least 2mx2m but maybe more. Current base (which must remain) is 1.6m in diameter and 11cm. There are hex screws that must be accessed at the base of the pole to change the settings as well. No idea what the cost to do this would be so put a random number down. Carpenter Builder Flooring Cabinet maker - Due date: Flexible However looking to get it done as soon as possible :)

I have an area in my kitchen where I want a super basic shelf system built. Happy for you to come and have a look and quote prior to booking. I have put price low till we work out costs. Also I have found when you put a price almost every offer is a lot more then budget so went low

Stick an adhesive vinyl sign 900mm x 1200mm on to an existing flat panel. The panel should be washed prior to sticking the sign on. The panel location is approximately 2.5m to 3m off the ground. You will need a ladder and relative experience working at height.

i need a shed to store firewood in my backyard. - Due date: Flexible

Putting together an easy shed 2.08m x 0.97m. Still in a box.

The bottom rung of the verandah railing is rotting from water damage and needs replacing and some slats as needed(approx 8 metres).It is in 4 sections measuring 2235mm, 2260mm, 1840mm, and 1920mm. The top banister is in good condition as are most of the vertical slats. Plus 2 wooden sash windows with the plastic tubing no longer stay up when opened. - Due date: Flexible

I need someone to build onto an existing partition I have in my tattoo studio, with the same finish ideally. Please see attached photos. - Due date: Before Friday, 22 September 2023

Carpenter needed to install locks, remove casement windows, install VJ sheeting, install a few chamferboards, install breezeway, skirting etc…. Can start asap in Windsor. - Due date: Flexible

I’ve got an empty cupboard that I need white shelves installed into create pantry space. Looking for someone to be able do this for me. - Due date: 8th - 15th July 2023

We would like to stain this church pew a darker colour to match the rest of the house. Solid timber Dimensions: 285 L x 50 Dx 90 H Location: Windsor

The bottom wooden rail of this window has split and needs replacing. - Due date: Flexible

Small timber decking area has become unstable underfoot on one half (closest to gate - in picture). Heavy rain from last year may have caused this. Some boards "dip" when walking on, some "flip up". Mostly, that half of the deck feels generally unstable. There are also some boards that need to be screwed down (not nailed) as they tend to bend up when only nailed. Looking for a cost effective solution as selling in near future. Happy for existing boards to be reused as they look ok. I think it's mostly under the deck that needs fixing. But I'm not an expert in these things! - Due date: Flexible

Looking to have a desk built in out upstairs space. Space is: 369cm wide and 50cm deep. Happy for the desktop to be melamine or similar, doesn’t have to be wood. Just something that will last so happy to take your recommendations. Happy for you to buy materials and include it in your quote, or we can also supply materials if needed. I’ve attached pictures of the space as is, and the neighbours desk space for inspiration (we have a similar layout in our house). Flexible on dates/timing, can we home weekdays, evenings and weekends to accommodate your schedule. Thanks! - Due date: Flexible

We took out one side of the cabinet around the fridge so that our wide fridge could fit. As a result, the cabinet is now missing one of its sides. We will need a piece of wood to be cut and joined from the ceiling down as low as the top of the fridge, and joined to the existing cupboard above the fridge. This cupboard is also currently drooping from the ceiling and we will need it to be fixed to the ceiling. We already have the piece of wood but it would need to be cut with a saw. All other materials will need to be supplied - Due date: Flexible

Deliver 35 sheets of plaster board from Salisbury to Windsor

Current kitchen cabinet doors are tan/green colour with a gloss. I want to repaint them to white gloss to match the rest of the cabinets. 7 doors and 2 panels - Due date: Flexible

Had to pull down a three ceiling panels to get a new beam into the roof cavity (as the wall below was removed and the joists needed support). I just need someone with better carpentry skills than I have to patch it up. Have plenty of VJ panels (from the wall, which was higher than the ceiling is long) which we can use as ceiling panels. The stud shown can either be worked around or cut 25mm out of to wedge the VJ in. Will need to use three VJ's plus a bit of one (where the 25mm thick wall was) to plug the gap. Likely that the width of the gap is very slightly different on one side compared to the other.

Had to pull down a three ceiling panels to get a new beam into the roof cavity (as the wall below was removed and the joists needed support). I just need someone with better carpentry skills than I have to patch it up. Have plenty of VJ panels (from the wall, which was higher than the ceiling is long) which we can use as ceiling panels. The stud shown can either be worked around or cut 25mm out of to wedge the VJ in. Will need to use three VJ's plus a bit of one (where the 25mm thick wall was) to plug the gap. Likely that the width of the gap is very slightly different on one side compared to the other - Due date: Before Thursday, 21 July 2022