A close up image of a carpenter sandoing a plank of wood
A close up image of a carpenter sandoing a plank of wood

Find experienced local carpenters in Spring Hill QLD

Fill a short form and get free quotes from local carpenters in minutes

4.3

Excellent rating - 4.3/5 (10900+ reviews)

A range of carpentry for all your needs

  • Cabinet making
  • Custom shelving
  • Wood repair
  • Custom made furniture
  • Deck sanding
  • … or anything else
It only takes 2 minutes. And it’s free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated carpenters near me

Recent Carpentry reviews in Spring Hill QLD

Greg did a great job. Super fast. Great communication. Highly recommend

Rip a delicate piece of cedar cladding 1m

$70

Julian did a thorough job. There were a couple of minor stains on some of the timber after he left but he came back and fixed them up without question.

Sand back and re-stain/varnish timber

$150

Great service, very professional, would highly recommend

Cut holes into stainless steel

$300

Dan Great job did what was asked on time and in budget.

Ply offcut 2080 by 630 with cutout

$100

Mark was great. Spot on with requirements and great communication.

MDF Customwood 4 pieces

$150

Ross did a fantastic job custom making a vanity for our ensuite bathroom. Prompt communication, professional, friendly and clean - definitely recommend. Very happy customers!

Make and install custom sized bathroom vanity for ensuite.

$600

What's the average cost of a carpenter in Spring Hill QLD

$100 - $660

low

$100

median

$300

high

$660

Low, median and high bar chart distribuiton

Average reviews for Carpentry Services in Spring Hill QLD

based on 22 reviews

5

22
0
0
0
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

29+

Tasks successfully completed

1

Average amount of offers per task

2

 hrs

Average time to receive offers

Statistics from the most recent tasks on Airtasker since 27th Jan 2021.

Airtasker has over 26 carpenters in Spring Hill QLD, with an average rating of 5.0 stars from 22 reviews. Get in touch with carpenters such as Sean V, Logan H, and Brenden M today to get a wide variety of Carpentry jobs done.
Don't live in Spring Hill QLD? We also have carpenters available in Lutwyche and Kelvin Grove available today.

Recent Carpentry tasks in Spring Hill QLD

Can’t open storage shed door

$60

Spring Hill QLD, Australia

6th Dec 2024

My storage space is a Titan shed. It can’t be opened as appears to be stuck. I’d like to open it.

Supply & install cornice for section of a kitchen

$200

Spring Hill QLD, Australia

19th Nov 2024

Needing to supply/install cornice above cabinets in kitchen to match the existing cornices and allow for painting. Does not need to be painted. Kitchen is approximately 3.5m long. See image for a better idea of what needs to be done. Last picture is just to show the type of cornice there is currently.

Great experience working with Sean, high quality work and would recommend him to anyone.

Install my window aircon

$110

Spring Hill QLD, Australia

15th Nov 2024

Hi i need my window aircon installed and secured in with either insulation in gaps or wood board on sides. i can supply materials if u tell me what to get or if you have i can pay extra . $110 install Plus materials if needed

Build a partition wall in a office

$5

Spring Hill QLD 4000, Australia

1st Nov 2024

want to build a partition wall to separate an office. Length 194 cm x Height 250 cm Plain, white, plasterboard. Framing with 10mm gyprock will do. Electricity has already been separated. we can do the painting, already got the paint

Install/ Attached Hardwood Plank

$800

Spring Hill QLD, Australia

27th Sep 2024

Install/ attached Hardwood Plank Looking for someone too: • Weld 4 FLAT pieces of steel to steel C beam • Attach 30-35 wide x 5200 long (can be in 2 lengths) hardwood to the above and existing c beam Basically, we want it to look like the existing timber beams but on the front of the existing C beam. Happy to pay for the timber separately (with the supply of a receipt) but will need you to collect. Please make sure you are experienced and insured and that your quote includes all materials, fees etc. Located in Spring Hill QLD 4000

Looking for fixing a bleach stain on a light grey carpet and dye it

$100

Springhill QLD, Australia

11th Sep 2024

I need someone who knows how to fix carpets to help me with a problem. There’s a bleach spot on my light grey carpet. I want the spot to be fixed and the carpet to look the same color as it did before. The inspection is on Monday morning so want it done on or before Sunday. Flexible with the time on Thursday, Friday and Saturday before 11 am. Flexible with the pay as well. Feel free to reach out with the quote

Cut 2 pieces of 2m wooden dowel into 1cm and 1.5cm pieces

$50

Spring Hill QLD, Australia

18th Aug 2024

I am doing a DIY project that requires short pieces of dowel. Unfortunately, I do not have the right tools to do it. Preferably, these lengths of dowel will be very accurate in size and have clean cuts to reduce the sanding needed as I plan to stain the end grain of the dowel. I have already bought the dowel, so it would be preferable if tools can be brought and the dowel can be cut on site.

Small kitchenette to install

$700

Spring Hill QLD, Australia

18th Aug 2024

I have small kitchenette to install Straight 2.4 meters. Ready to install No doors and handles No kick board. No end panel. Base cabinet 600mm+450mm+450mm+900mm Upper cabinet Range hood 600mm+900mm+900mm Timber bench top 2.4 meters 2 zone hotplate and single bowl sink Cut to fit.

He is very neatly do the job. Very happy with out come.

Roof Installation

$1,500

Spring Hill QLD, Australia

13th Aug 2024

We need to Colourbond (or equivilant) ideally in monument colour to match existing to the awning to try and make it more watertight. Works to be done: 1. Supply and install sheeting 2. Install sheets on top of the steel/ timber awning 3. Screw into the timber to secure 4. Cut out ridges to make the sheets flush to external wall 5. Seal/ silicone all joins to make watertight 6. Ensure there is a slight gradient so so water flows awat from the building Notes: - Please includes all fees, materials and so forth in your quote - Awning is approx. 3m above ground - Located in Spring Hill - Awning is approx. 10m x 2m - Please ensure you are experienced & insured Thank you

Install HDPE sheeting to awning

$500

Spring Hill QLD, Australia

6th Aug 2024

We need to install HDPE sheets to the awning to try and make it more watertight. We would like to use these sheets, if possible (2000x1000, black), but open to suggestions if you don’t think it is suitable. https://plasticwarehouse.com.au/product/hdpe-sheet-pe-100-simona-engineering-plastics-cut-to-size/ We will purchase the sheets but will need you to collect them from the factory in Eagle Farm. Works to be done: 1. Collect HDPE sheets from Eagle Farm 2. Install HDPE sheets on top of the steel/ timber awning 3. Screw into the timber to secure 4. Cut out ridges to make the sheets flush to external wall 5. Seal/ silicone all joins to make watertight Notes: - Please includes all fees, materials (except for the sheets) and so forth in your quote - Awning is approx. 3m above ground - Located in Spring Hill - Awning is approx. 10m x 2m - Please ensure you are experienced & insured Thank you

Build Timber Frame

$600

Spring Hill QLD, Australia

28th Jun 2024

We are wanting to separate the 2 spaces by turning the Ikea wardrobes into built-ins by building frames around them then plaster and paint. We are looking for a carpenter to build the framing. Works: 1. Cut 1 x freestanding wardrobe in half, and fix on top of the existing wardrobes (in effect creating floor to ceiling for 2 of the robes). Blue boxes in the photo. 2. Build timber frame ready for plastering, effectively cutting the room in half. Orange boxes. 3. Attach framing to the rear and sides to allow Gyproc to be attached. 4. Reinforce framing between the 2 cabinets (the ones cut and fixed in step 1) to allow a TV to be mounted. Notes: - Appreciate the wardrobe will likely be fixed too - We understand we will lose access to the roof access panel - We need you to be qualified and insured - Please ensure your quote includes all materials, fees and so forth - Located in Spring Hill QLD 4000

Mark was awesome! Highly recommended and will definitely be using him again. 11 out of 10 stars :)

Wallpaper installation services - Peal and Stick

$100

Spring Hill QLD, Australia

3rd Jun 2024

Installation of peal and stick wallpaper on walls. I can specify dimensions to you separately. Just a small corner. Product - Peal n Stick wallpaper Wall Sizes - 1. Height - 2.46 Metre Width - 1.5 Metre 2. Height - 2 Metre Width - 1.28 Metre 3. Height - 2.04 Width - 1.54 Metre Please drop in your quotes and availability.

Qualified cabinet maker to come on-site and design new kitchen

$50

Spring Hill QLD, Australia

4th May 2024

Seeking a qualified cabinet maker to come on-site and design a new kitchen. Potentially a future opportunity to supply and install. Kitchen space is approximately 4.2m x 2.4m. Parking will be available in dedicated off-street parking

Theo clearly has a wealth of experience in designing kitchens. His communication was excellent. He was punctual and thorough.

Cabinet maker needed to replace kitchen cupboard doors

$5

Spring Hill QLD, Australia

9th Mar 2024

Looking for someone to come and quote for this job: We have a rental unit and want to give the kitchen a facelift with - new cupboard doors - new island in same product as doors - new end cabinet in same product as doors - new laminate benchtop All appliances remaining in place. There is a very obliging tenant and onsite manager We would need the existing island ripped out and removed as well

Replace vanity drawer and doors

$500

Spring Hill QLD, Australia

28th Feb 2024

need a cabinet maker to replce the doors and drawers of a vanity unit

Design and/or manufacturer front gates

$50

Spring Hill QLD, Australia

4th Feb 2024

We need some front entrance gates designed and built for our Heritage listed house in Spring Hill QLD. I think an iron set would probably suit the 1860 era, however I'm open to suggestions on other options. Price on either just design, if that's all you can provide or if you can design and build then that as well.. Height to centre of arch radius is 3100mm. Width is 1760 to inner front posts or 2275 to outer post (that sit behind the front posts). Height to bottom of the arch is 2100. We can install - Due date: Flexible

Construct cat enclosure

$120

Spring Hill QLD, Australia

21st Jan 2024

I bought a flat pack cat enclosure which is about 2x1x2m (maybe a bit smaller). I need someone to construct it. The space is in a corner of the garden so there is enough space to get there but it’s a small path down. - Due date: Needs to be done on Monday, 22 January 2024

Mostafa did an excellent job. It was a very hot day and not an easy task but he did excellent.

Help me to cut metal sticks tor reduce the height.

$50

Spring Hill QLD, Australia

26th Dec 2023

I have a racking storage shelf. The legs are to high that dont fit my bench. I d like to cut it by approx 10 cm. There are 8 of them. - Due date: Flexible

Good value for money.

Build shelving unit x2, Move nursery chair upstairs, unpack.

$50

Spring Hill QLD, Australia

2nd Nov 2023

Build 1 large shelving unit in garage. Build 1 small cube shelf unit for bedroom. Move nursery chair (boxed) upstairs, unpack and remove box. - Due date: Needs to be done on Friday, 3 November 2023

Great job, very fast response!

Laser engrave/cut "Now Playing"

$150

Spring Hill QLD, Australia

20th Sep 2023

We would like some ideas first please (fonts, possibilities etc), and then laser cut “Now Playing” into a piece of birch ply timber (with a film face), which is 300mm x 50mm (18mm thick). The ply is “Black Film Face Hexa Birch Plywood” – an example is here, and picture below…. https://www.plyonline.com.au/products/hexa-plus-black-baltic-birch-plywood-ext-non-slip-12mm-available-in-3-sizes?pr_prod_strat=use_description&pr_rec_id=a8af11b20&pr_rec_pid=7726271463577&pr_ref_pid=7155917947033&pr_seq=uniform Please let me know if this is something you are able to do. - Due date: Flexible