Find experienced local carpenters in Tallai

After someone to put together gal stringers and timber steps of a retaining wall. All materials supplied. May also look at having a platform built, all depends on availability.

I am looking for a carpenter to build something that resembles the attached but with three cubes rather than one. Dimensions of each cube will be 28inches wide by 13inches deep by 13inches high The legs will be 10inches long The unit will be built with walnut Total height of unit should not exceed 51inches

Needing someone to build a pool filter cover and install this and supply all materials. Also need current box taken apart and removed

Carpenter joiner to fit out interior van, linings, insulate, cabinetry etc Experienced desired.

I am after a concrete slab, brushed finish for a back patio area. Foot traffic only. Size is five meters x ten meters x 75 mm thick. Materials are able to be arranged seperate to this task. Slab will need to be poured prior to the weekend. I have arranged for the area to be dug out. Tasker will need to box up, fit mesh and pour the slab. Please provide cost for labour and in the comments of your offer cost for mesh and concrete (everyone’s cost will be pretty close for materials anyway. I will pay for materials separately or reimburse) I do require the job to be completed prior to the weekend. Location is Tallai.

I had a mate do some gyprock and plastering and it keeps cracking at the joins . About 5 or 6 different joins will need to be redone

Cut and put skirting boards on. Times 6 pieces.only 4 need cutting to size: 2 door handles to attach to new doors.

Hi guys I have 4 exposed timber rafter beams that urgently need to be repaired as they have termite damage Potentially can cut a section out and patch

Put together 2 lots of Bunnings shelving for a garden shed

I am looking to convert my garage to a games room and as part of it I would like to build a bar complete with stools and room for 4 people to drink at, storage for bottles, glasses etc and space under the bar for legs. The space I have available is approx 2.5-3m wide by 1.5m deep by 2.5m high

Our kids' old playfort has had a good life but now it's time to say goodbye. We envisage a rebirth as a multi-bay composting station - keeping all bar 4 of the posts in and cutting them down to 1m.. I'd also like to reuse its decks in my garden as they are in good condition. All materials supplied

Would like this started today if possible - Some pre painting tasks required, cut & install architrave, sanding, gap filler, some tiles shifted from shed to house, depending on skill base, may have more you can help me with. Let me know your home handy man skills. Would like tasks completed asap - sooner the better.

Need on an on going basis, high quality small triangular stools. Must be dressed, sanded and sealed (linseed oil). Would like an experienced carpenter. Had a friend making them but he can no longer do them due to increased work load. Charging $55 a stool. Quote is for 10 ($550) Order lots: between 10-20 at a time. Sizing: Height - 30cm Width - 35cm

Custom gate for top of stairs Needs to be toddler safe and no trip hazards Negotiable on price looking to solve ASAP as our living space is upstairs 110cm across too large for standard gates, image of temp solution in place Tallai

I had to remove the roof from 2 outdoor decks when the house roof was replaced, these are damaged and I now need to cover the decks with a form of roof. I'm open to suggestions on what will be the most affordable and least costly option. Inviting roofers to please provide a quote, I have attached pictures of the decks that need covering. Deck 1 does not have any pillars (approx 2m x 8m). Deck 2 has two brick pillars that the old plastic roof sheets were attached to. The top of the pillars may just require a bit of re-enforcement (approx 2m x 8.5m).

Needing my titan shed insulated and plasterboard applied and get it ready to paint. I’m putting air con in so need this done first. All materials needs to be supplied. The shed is 10.5 x 7.5. Walls only no ceiling.

To make a small wooden plinth or stand for a 10 kg statue to place on my deck. The wood must be smooth and sturdy and perfectly finished. Size: Base - 8 “ x 8” Height- 10” x 10”

We have two external gables that need updating. Panels need to be removed and replaced with cladding. One story house. Would be great if materials can be collected too. Would be great if you’re able to show examples of having completed similar work. Needs to be done ASAP.

Instal skirting boards to a few rooms. 31 red oak drive Tallai [Content Moderated] Call Blair [Content Moderated]