Find experienced local carpenters in Labrador

I started setting up the shed, got about 80% of the panels done but ran out of time and now I can't be bothered to start up again. :) Looking for someone to do the final panels and then assembly. - Due date: Flexible

I've got a (1.0mx2.7m)balcony on second story which needs repair, it's had some materials removed to inspect the quality of the joists below it and to find that some of them have wood rot. A builder suggested that 3 of them have additional reinforcement (plating with same size new joist. Joist dimension (35mmx170mm) To complete the entire deck including balustrade see picture supplied for desired balustrade look Task list: *Sand joists (can supply with orbital sander and pads) *Treat joists with a coat of either varnish or paint (supplied on day) *Add plating joists - I will provide certified structural beam to be cut into 3 X 1m sections) to the damaged ones. - Supply your own heavy duty nuts, bolts and washers >110mm suggested. *Install beam at the end of joists (provided) *Install posts (provided but byo fixings) -one corner -one centre -two on brickwork (one either side) *Install decking (synthetic decking provided) *Install aluminium fencing inside posts (fencing and brackets provided) *Put 2 costs varnish on posts and rail (provided) Due date: Flexible

Assemble shed from EasyShed on side of our house. Comes in seperated panels, hinges, screws etc. Photos attached showing pieces, diagrams and required tools. - Due date: Flexible

Would like to build a nice timber pool pump enclosure with black metal waterproof roof to house my pool pump and electrical. Am installing Barrell sauna next to it so would like to build to match the timber and black aesthetic. - Due date: Needs to be done on Sunday, 13 August 2023

Wooden frame Glass panels On castor wheels Dimensions as an approx guide- 170cm height x 100cm width x 40cm depth - Due date: Before Sunday, 30 July 2023

Hi I am either purchasing a Large wooden cabinet or a large wooden shelving unit. The cabinet will need to go from Coombabah to Labrador The shelves would need to go from Elanora to Labrador. Please respond individual quote prices as it it will only be one or the other not both. - Due date: Flexible

Need some cabinet shelves custom made and installed - Due date: Flexible

Sand and stain deck and stairs as pictured. Provide own tools and products. - Due date: Before Friday, 28 April 2023

Measurement of the space, buying the material and installation.

square set corners around new windows and build in new linen cupboard

Need eve sheets install & few other odd jobs done. - Due date: Before Friday, 23 December 2022

I would like to know the estimation price if it not suitable for the buddget that I over. Please note i would love to do refubs, and the rest of the materials will be my responsible to. INSTALL: - basin ( single 56L) - kitchen tap mixer - backsplash (1.2sqm2) - making cabinet (dimension and style will be provide, material specified) - Pantry - Due date: Flexible

Hi there, My fence needs a bit of maintenance done on it. It is leaning a bit and some palings are bent and some need to be nailed in again. I have attached photos. Also would like a quote on how much it would cost to add horizontal palings at the bottom of the fence. Thanks, Candice - Due date: Flexible

Wooden deck at the back of my property - there appears to be rotting of some of the support boards under the deck needing repair. - Due date: Flexible

Need this wall too be plastered. Plaster sheet will be supplied. I will be installing the frame for it too be attached too and also removing the trim Just need you too install plaster sheet on both sides so 2x pieces and too set/fill the sheets Measurements is roughly 1000 L x 1200 H More work will be required as re doing the house so future work available. - Due date: Flexible

Need someone to do decking in garden. Someone who has a skill at it as it's not a straightforward flat deck. I need to incorporate a spa and seating.

I need someone help ny husband build a deck. We have all tools. Handyman who has experience on timber work or decking . I can pay hour rate . From Sunday tomorrow

Looking for a chippy or skilled worker with his own tools to do 4 days of work on the outside of a timber weatherboard house in preparation for painting. Needs to be good with timber and have a decent work vehicle with all power tools and ladder etc. Mainly replacing rotten timber/ bogging / sealing Materials obviously provided or reimbursed - Due date: Flexible

- build a garden shed (brand new) - Due date: Flexible

Hi there, I’m looking for someone to install VJ board/shiplap on my bedroom wall. The wall measures 3920mm wide & 2610mm high, with a window in the center. I’m normally quite handy and happy to do these things myself, but since I don’t have a table saw I’m worried the cuts won’t be straight enough and I want it to have a professional finish. I have a supplier I can order the VJ from or if you’d prefer to use your own supplier, please let me know. I’d prefer to use a nail gun for installation since adhesive can damage the existing wall if it ever needs to be taken down. I have an air compressor and nail gun at home so happy for you to use that. I’ll remove skirting prior to job and would then just need you to cut and install the new skirting which I already have. I’m also happy to finish and paint the wall after install, the job would mainly just be measuring, cutting and installing. Attached is an image of the wall now and an image I’ve photoshopped of the desired outcome (after painting) I work from home so any week day suits me. Let me know if you need any more info - Due date: Flexible