Find experienced local carpenters in Gold Coast

Formwork Carpenter / Concreter – Steps + Path (Clean Set-Out Required) After a competent formworker/concreter for a residential job. 🔧 Scope: • ✅ Set out and form concrete steps up a slope alongside retaining walls (both sides of pool) • ✅ Steps to be consistent rise/run and square (tiled finish) • ✅ Form straight path off the top • ✅ Oversee and complete the pour for the steps This is a clean, visible area — looking for a proper set-out and tidy formwork. 🧠 Requirements: • ✅ Experience with concrete steps (not just slabs) • ✅ Understands levels, set-out, and base prep • ✅ Can form and pour without supervision • ✅ Own tools Quotes welcome Pre and post photos examples attached.

Hi there, I recently purchased a cabinet from Kmart that’s designed for easy assembly. However, it’s about 2cm too long to fit under my powder room sink, so I need it trimmed down slightly and then assembled.

Scope of Works: Bathroom Carpentry 1. Ensuite Bathroom&Share bathroom (Upstairs) Demolition: Already completed by owner (stripped back to studs). Structural Work: Check all existing wall studs for plumb and straightness. Straighten or pack out where necessary to ensure walls are perfectly flat for 600x600 porcelain tiles. Niche Construction: Build a recessed shower niche (approx. 300mm x 600mm) between studs. Please confirm the best position based on plumbing. Noggings: Install additional noggings for the double vanity, wall-mounted mirror, and shower screen fixing points. Sheeting: Supply and install 6mm (or 9mm) Villaboard to all walls, floor-to-ceiling. Ensure all joints are set correctly for waterproofing.

Looking for someone to make a simple rectangular cut inside 3 wooden panels. I already have the panels cut — I just need the internal cut shown on the left side in the photo. I don’t have the tools to do it myself. A jigsaw or similar is fine. I can’t do this at home, so I would need to come to your place.

Scope of Works: Bathroom Carpentry 1. Ensuite Bathroom&Share bathroom (Upstairs) Demolition: Already completed by owner (stripped back to studs). Structural Work: Check all existing wall studs for plumb and straightness. Straighten or pack out where necessary to ensure walls are perfectly flat for 600x600 porcelain tiles. Niche Construction: Build a recessed shower niche (approx. 300mm x 600mm) between studs. Please confirm the best position based on plumbing. Noggings: Install additional noggings for the double vanity, wall-mounted mirror, and shower screen fixing points. Sheeting: Supply and install 6mm (or 9mm) Villaboard to all walls, floor-to-ceiling. Ensure all joints are set correctly for waterproofing.

We are having garage doors installed and there ia no support right in the middle of garage wall. Need to add support on both sides

Install 2 indoor doors, sanding to fit. Doors handles. Sanding of other 2 doors to close properly

Unpainted Pine Buffet and hutch unit. Needs stripping and refinishing to natural timber.

Removal and install of a laundry sink, including the building of flat pack fixtures.

My kitchen cabinet is swollen and I wondering if is possible to fix

I have an AEG Fully integrated Dishwasher that has a loose door panel. Some of the screws have loosened. Have attached pictures

Needing a carpenter to hang a cabinet mirror over tiles in a new bathroom. Also install 2 toilet roll holders and robe hooks x 2 through tiles in new bathrooms.

Hello! I have a flat pack ikea cabinetry to be built in a salon room - 2 x 80cm cabinets with shelves and 1 x 60cm cabinet with drawers. A bench top that needs to be cut to size so will need a jigsaw or similar to take off 20cm or so. Overall size 220 cm x 80cm. Must have own tools and some experience. Thank you :)

Have a corner kitchen cabinet fold out door that needs re hanging. It has never closed properly and falls off. The previous screw holes are damaged, so need filling to get the door reattached. Have tried filling with wood filler, toothpicks, etc but the filling isn’t solid enough and the door keeps falling off. Happy to pay separately for any suitable materials required.

I have timber rot in a load-bearing retaining wall post and need a replacement stump to hold the wall,

Hello, We are looking for a skilled handyman, joiner, or cabinet maker to repair and align two cabinet doors at our retail store, in Pacific Fair. The Issue: Two cabinet doors behind our front desk are not closing or latching correctly. The doors are misaligned, sitting unevenly, and are not catching on the top latches. This looks unprofessional and is an inconvenience for staff. One door hinge appears to be particularly loose. The Job: The task is to professionally adjust and repair the cabinet doors so they function correctly. The scope of work includes: 1. Inspecting the hinges and latches on both doors. 2. Re-securing any loose hinges and making sure they are firmly attached to both the doors and the cabinet frame. 3. Adjusting all hinges to ensure both doors hang straight, are perfectly aligned with each other, and have even gaps. 4. Adjusting or replacing the top latches as necessary so that both doors close securely. Please note: The successful contractor MUST supply any necessary replacement parts, such as new screws, hinges, or latches if the current ones are found to be broken. The cost for these materials must be included in your final offer. Requirements: - MUST have proven experience with cabinetry repairs, particularly with adjusting concealed/European-style hinges and cabinet latches. - You must supply all your own tools AND all necessary materials (as mentioned above). - Ability to work cleanly and professionally within a live retail environment. - Public liability insurance is required. Location & Timing: Location: Pacific Fair Shopping Centre, Hooker Blvd, Broadbeach QLD 4218 When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete repair. Your offer should include all labour costs and the potential cost of supplying any required replacement parts. Thank you.

Hi, I’m looking for someone to repair or replace some external timber trim on my townhouse in Robina, QLD. The timber is weathered and may need sanding, treatment and repainting, or partial replacement if required. Please provide: – Your availability – Estimated cost – Experience with external timber repairs Thanks.

I have a lot of fire wood in my garage that needs to be split so I can actually burn it.

Hi! I need someone to install a simple timber trim/frame around a bathroom window to neatly finish the edges around my plantation shutters and cover the visible gaps. I already have the measurements I will buy the timber and get Bunnings to cut everything to size So this is mainly installation/labour only. Job includes: • Install pre-cut timber pieces around window/shutters • Fix securely (nails/screws + adhesive as needed) • Ensure straight/level and neat finish • Light filling of nail holes (optional) own tools required, eg drill/driver, level, fixings, nail gun (if preferred). Small job ☺️

I have a 63 Manhattan berthed at Sanctuary Cove Marina. There is cream carpet in the hallway and bedrooms. A leak resulted in a dark stain on the carpet in the hallway and I need to have this cleaned professionally. I also need to have the couch in the main bedroom cleaned & the carpet in that room too.