Find experienced local carpenters in South East Perth

Wooden floor outside the bathroom is a bit swollen, and doesn't match with the rest of the floor. Needs repair

Replace wooden gable facia on one side of house plus one side of carport

We've got a concrete slab in our 'living room' that we'd like to get some options for. We were thinking of either polishing or maybe epoxy, but we're open to suggestions! The area is 25m2 and we're located in Como. Our house is a 1950's house, and the living room is actually the old front sunroom/sleepout that they decided to extend with additional concrete next to the existing slab. One problem is the new half of the concrete is level, but the original half is sloped downwards about 2 inches. We like to know if it's feasible to level the concrete before considering making it look pretty or not (eg by polishing or using epoxy). It might also not be worth the effort. The concrete has been covered with laminate flooring and vapor barrier until now, we bought the house last year.

Installation of kitchen cabinets. Almost 6, along with some drawers and bench top as well. Looking for someone reasonable.

1. Build in, supply and fit a standard redicote door with G4 Series Florence Leverset in Satin Chrome to an open doorway to close a room off. Paint with appropriate finish in Wattyl Cotton Grey (wall) and Wattyl White (Door) - may be paint available at the property left from the builder - TBC. 2. Fitout a recess with 4 x shelves and a hanging rail, supply & install robe doors to match bedroom robes (sliding mirror doors with matt silver frame, fitout to be 19mm melamine shelf with 19mm chrome hanging rail). 3. Install dividers and doors to alter walk in pantry to 5 x individual pantries

Need timber effect panels installed on back wall. Need timber slatted wall installed for dividing wall. And need a pole (external) boxed in timber. Price negotiable. Install only Similar to the pics. Wall normal rectangular shape about 5m. Slatted wall is about 3m.

I need kitchen cabinet maker for only wall cabinets

Handyman needed to nail & stain deck and verandha floor. Two coats of decking oil.

Have 2 wooden jarrah high quality chairs, the wood is splitting need a competent carpenter to re glue timber together. Note the photos taken are from the worst chair and on one side. The second chair is only 1/2 the splitting of wood. I dont have enough clamps to fix myself.

I need a carpenter or cabinetmaker to adjust my existing kitchen oven cavity to fit a new 600mm (W) x 600mm (H) built-in oven Current size is 545mm (W) 650mm (H)

Polishing or rails of stainless steel gate Materials provided

Hi there 👋 I’m looking for an experienced cabinet maker to help with some cabinetry and finishing work in my home. The job involves replacing worn trim and installing five new cabinet doors, reusing the existing hinges and handles. ⸻ 🧰 Scope of Work 1. Trim Replacement • Remove existing worn or damaged trim carefully to avoid wall or surface damage • Supply and install new trim to match the existing profile and style (paint-grade timber or MDF) • Cut, fit, and fix neatly with clean joins and tight mitres • Fill, sand, and prepare ready for painting (painting not required unless discussed) • Leave a smooth, professional finish with no gaps or visible nail holes 2. Cabinet Doors (x5) • Remove old cabinet doors and fit new ones in their place • Reuse all existing hardware (hinges, handles, etc.) • Ensure proper alignment, spacing, and smooth operation of all doors • Adjust hinges as needed for clean, even gaps and flush fit • Check that all doors open and close smoothly and evenly ⸻ Dimensions: ⚙️ Materials • Please specify in your quote whether you’ll supply the trim and cabinet doors, or if you’d prefer I provide them. • If you’re sourcing materials, match existing dimensions and style as closely as possible. ⸻ 👷‍♂️ Who I’m Looking For • Experienced carpenter, cabinet maker. MUST BE QUALIFIED • Brings own tools and equipment • Reliable, tidy, and pays attention to detail

🪚 Experienced Carpenter Needed – Replace Window Sills & 3 Doors Hi there 👋 I’m looking for a skilled and reliable carpenter or handyman to carry out some interior carpentry work at my home. The job involves replacing existing window sills with new solid timber ones (as shown in the photos), and removing and replacing three internal doors. ⸻ 🪵 Scope of Work 1. Window Sills • Remove existing window sills carefully without damaging surrounding frames or plaster • Supply and install new wooden window sills, same style and dimensions as current ones (reference photos provided) • Ensure all new sills are level, neatly fitted, and securely fixed • Sand, fill, and prepare the timber for painting or staining (no painting required unless discussed) • Clean and tidy finish with no gaps or uneven edges 2. Internal Doors (x3) • Remove and dispose of old doors • Supply and fit new internal doors (standard hinged doors – details and style to match existing, unless otherwise discussed) • Plane and trim doors as needed for a perfect fit ⚙️ Materials • Please include in your quote whether you’re supplying the timber, doors, and hardware • If not supplying, I can purchase materials based on your recommendations ⸻ 👷‍♂️ Who I’m Looking For • Qualified or highly experienced carpenter / joiner • Reliable, punctual, and detail-oriented • Own tools and transport • Experience with timber installations, framing, and finish carpentry • Takes pride in clean workmanship and professional results ⸻ 🕒 Timing • Flexible with dates, but ideally completed within the next 2 to 3 weeks • Work can be done over a couple of days if needed ⸻ 💬 Please Include in Your Offer: • Whether you’ll be supplying materials (timber, doors, hardware, etc.) • Estimated time to complete the job • Photos or examples of recent similar work (if available) ⸻

Install new timber door, need shaving to size. Already purchased dwadlock and hinges.

I am looking for a carpenter to make this on existing wall , please refer to picture or handyman

Supply and install walk in wadrobe (L shape 1.9m by 1.3m)and over head cupboard(1.9m width) in southern river

I have a badly sagging patio frame constructed from wood I would like disassembled without damaging the house. I will dispose of the materials. There are 4 main upright columns 100mm x 100mm, 10 beams from the facia which are 75mm x 50mm, 3 crossbeams 75mm x 50 mm and 4 crossbeams 50mm x 25 mm.

Hi, my vehicle suffered and engine issue resulting in it leaking engine oil on the apartment's ground and basement parking. The are a few pools of engine oil leak on each floor (from where the vehicle was parked) and one dotted trail connecting both (from when vehicle moved from basement to ground floor).

I need to cut a 18mm timber board in a 430mmx1605mm seize. Photo of the original board to be cut attached. I don’t have the tools. Need the full service, but will bring the timber

Help to build a shelf and sort out decoration. It will likely take about 4hours