Find experienced local carpenters in Gold Coast

Large deck, consisting of two areas - main alfresco and connected pool sections. Both areas require cleaning, removal of old stain and sanding. New stain & topcoat to be applied (these will be provided).

Decking, outdoor carpentry etc

Carpentry Works projects available

Small kitchen project. Hi, I'm looking for a quote for a small custom drinks/coffee station for my kitchen on the Gold Coast. I want to utilise a small corner in my kitchen that is currently unused. I want a bench top and a couple of floating shelves

Cabinet to replace the desk and also a storage area built under my stairs

We are looking for an experienced cabinet maker/joiner to upgrade the cabinetry in our existing laundry in Coomera Waters. We have attached photos of the current laundry together with a concept render showing the general look we are after. The existing benchtop, sink, tap and splashback are to remain. Scope of work: Move the existing dryer and stack it above the washing machine on the right-hand side We already have the washer/dryer stacking separator kit No cabinet or shelving above the dryer Build and install a new base cabinet in the space where the dryer currently sits under the benchtop Install new closed overhead cabinets above the existing benchtop and sink area Overhead cabinets approximately 800 mm high Cabinets to finish close to the ceiling, with suitable filler panels as required Approximate cabinetry width is around 1650 mm, final measurements to be confirmed on site Flat-panel modern cabinet doors Natural/light timber-look finish similar to our existing kitchen cabinetry, photo will be provided for colour reference Existing lower cabinetry can remain unless modification is required for the new cabinet Supply, manufacture and installation required We would like someone who can come out, measure the space, recommend the closest available timber-look finish and provide a complete quote.

I’m looking for a carpenter to replace the existing temporary timber insert in my sliding balcony door with something neat and tidy. I’ve attached an AI drawing showing roughly what I have in mind. The panel needs a plastic fitting near the bottom for the portable air-conditioner exhaust hose. We could either use the existing fitting or purchase a new one from Harvey Norman. It also needs a small hole for the water drainage tube. The panel should be secured from the outside and allow the sliding door to close properly against it. The approximate height is 2.4 metres, but the measurements are not exact, so please allow a little extra material for trimming on site. I would like the panel painted white or made from white melamine-coated board, provided it is suitable for outdoor exposure, as one side will face the balcony. I would also like the existing sliding door and frame cleaned up, including removing the old adhesive and untidy material.All material must be included

I need someone to saw off the legs of a display Unit unit to fit it into my apartment

Carpenter needed to Install Vanity Kickboard (supplied): 1. Remove old water-damaged kickboard - mouldy, crumbling and section missing (see 3 photos). 2. Install NEW kickboard supplied: KICK-120S - 1200 Vanity Kickboard - Dimensions 1140 x 400 x 200mm (see boxed photo - new in box, cut to size). 3. Neat finish with silicone / sealant to protect new tiling and waterproofing. Important: Bathroom has just been re-tiled and re-waterproofed - careful finish required. When: Today or tomorrow from 10am onwards - flexible. I supply: Kickboard only. You supply: All tools, fixings and finishing materials. Ideal Tasker: Local experienced carpenter with cabinetry / vanity finish work. Own insurance. QLD QBCC licence preferred for this minor non-structural work. 4 photos attached. As we prep the house for sale there will be other small separate carpentry tasks to post this week. If this job goes well, I'd love to offer those other tasks to the same carpenter.

We have a switchboard and Small electrical Boxes in our lounge room. Want to enclose in a cabinet which has no back but is otherwise enclosed with doors. No shelving required. The dimensions are 1800 high, 1145 width and 350 depth. The height and depth are flexible.

Request an hourly rate Carpenter Required – Bathroom Structural Flooring Looking for an experienced carpenter to work on an hourly rate for a first-floor bathroom renovation Scope of work: * Install structural flooring ( yellow tongue) * Install fibre-cement floor and wall sheeting * Bathroom floor area is approximately 5.28 m² * Ensure the floor is level, secure and ready for waterproofing and tiling * All materials are already onsite Carpenter must have their own tools, relevant experience, licence and insurance. Please provide your hourly rate and availability.

Hi there we are looking for someone to help with the gap in the front fence which is being rented today. We had previously filled the gap Timbo with a copy so we need to be swapped out for blue board or cement. Also have a gap around where the new front door is going to be filled somehow

A large kitchen cabinet/drawer has parts missing and is no longer operational. I need help fixing it please

Hi. I need a cabinet maker to pack the cab between current wall and Asko coffee machine. We have the white panel material

CARPENTER/CHIPPY/HANDYMAN REQUIRED – FIVE REPAIR JOBS Experienced carpenter, chippy or highly capable handyman required for five minor repair jobs at a property in Broadbeach Waters. Jobs include: 1. Repair and rehang the arched outdoor garden gate so it opens, closes and latches correctly. Replace damaged hinges, latch or timber sections where required. 2. Repair the small damaged/open timber section above the curtain and window area. Secure and finish the area neatly, ready for painting. 3. Repair and realign the garden shed door panel so it open, close and secure properly. 4. Repair the damaged kitchen drawers, including runners, supports and alignment, so all drawers operate correctly. 5. Repair and finish the exposed bathroom doorway/frame. Replace or add suitable timber trim where required and make the opening neat and ready for painting. Photos of all five jobs are attached. You must have: • Carpentry and general repair experience • Your own tools and equipment • Good Airtasker reviews or examples of similar work • Ability to start promptly • Appropriate licence and insurance where required Please include: 1. Your earliest starting date 2. Estimated completion time 3. Whether materials are included 4. Your experience with similar repair work 5. Whether you can remove and dispose of any damaged materials Location: Broadbeach Waters Indicative budget: $400 labour only, with materials reimbursed separately.

Hi, I’m looking for a quote to supply and install one additional white shelf in an existing kitchen cabinet cavity above my fridge. The opening is approximately 900–920 mm wide x 300–350 mm deep. It doesn’t need to go all the way to the back wall, just to where the colour of the wall changes. I’d like the shelf to: * Be made from white melamine/MDF to match the existing cabinetry as closely as possible * Be approximately 16–18 mm thick * Span the full width of the existing opening * Have a finished/edged front edge so there are no raw MDF/melamine edges visible * Be installed securely between the existing cabinet sides * Have concealed or discreet supports, so the finished result looks like it was part of the original cabinetry Could you please provide a supply and installation price, including materials, cutting/edging, hardware and labour? Thanks!

Carpenter with skirting experience to assist another carpenter. Not straight runs, lots of angles etc in an apartment. It is a 3 bed, 3 bath but 1/3 of the apartment is already done just need assistance doing the rest. Day rate

150 cm x 15 cm kickboard to be replaced in kitchen

Two heavy duty shelves need building in Kennards storage facility in Southport on Olympic Circuit

Most of the cabinets have been installed and the contractor stopped the job instantly. Only one needs installed, Adjust and place handles on the doors and more touch ups needed to finish the job.