Find professional window and door services in Cheltenham VIC

Small outdoor paving area. Needs regrouting. Need removal of old grout and redo. Area approx 2.5m x 4metres Price of course is an opening range - Due date: Flexible

I need help with the following at my home: 2 sliding doors that get stuck and won’t fully close. Replace bottom water seals on 2 shower glass doors (old seals are loose/worn). Photos attached. Looking for someone experienced with door and shower repairs.Please bring your own materials. Thanks!

Replace rotten steel garage door frame with wooden. Door is for garage (outside) but under shed and frame is connecting to brick wall. Please provide quote without materials Update 1: Put the door & handle back. I have not put every single details. Please include all you need for a working door. If you have any questions, please confirm. Thanks!

We have recently completed foundation stabilisation (resin injection) for our house. Now we need a professional to repair the structural issues caused by the previous settlement. 1. Wall Leaning: Brick wall is leaning obviously. 2. Cracks: Several cracks in the brickwork, especially around the window frames. 3. Gaps: Big gap between the window frame and the wall that needs sealing/ realigning. Price to be discussed.

Place felt trim around garage door in factor, roughly 5-6m high

Security door closer pulled out of frame during furniture delivery. Timber split, screw holes blown. Need closer remounted properly into solid frame (or replaced if required). Heavy security door. Please bring appropriate fixings (rivnuts / anchors / backing plate).

New panel lift door required Remote controlled Smooth cream 4300 x 2150 Ready to go Thanks

Modify the door to open from the opposite side for 2 rooms

I have a new security/screen door already purchased and ready to install at the front of my house. The existing aluminium reveal frame is older and has a lot of previous screw holes, and is likely too shallow for the new door. Because of this, the installer may need to either reinforce, overlay, or replace the aluminium reveal/jamb so the door can be mounted correctly, catch properly, and clear the main timber door hardware. This is not a straight “screw it on” job, some framing/retrofit work is almost certainly be required. Budget was for labour only. Materials (aluminium angle/flat bar or timber reveal, fixings, seals, etc.) will be paid separately if required. Looking for someone experienced with security door or screen door installs.

Bump in driver side door approximately 3-4cm wide and 15cm long. No paint has come off looking for someone to push out the bump

We have two bifold doors from the kitchen to the pantry. One door has lost the top fittings and the door drags on the floor. We are hoping this can be repaired.

Build a 2800mm W x 2300mm H wall with a standard hinged door in a single garage. Wanted to seperate the area into clean storage and dirty storage. Fitout to include wall construction, plaster, finishing and door hanging. I can manage final sanding and painting. There is also an option to have the hinge door changed to a internal cavity door (depending on cost)

Literally need someone with a masonry drill and bit to make holes for my new door bell

Refer to photo; dog ran into wire fly screen. Needs fixing. Probably a relatively quick job for someone who knows what they are doing

I need to fill in the grout in the small cracks near the window and also fix the grout in the tiled floor on the balcony. Also, fix the cabinet door in the kitchen, which won't shut properly.

Sliding door that leads on to balcony has come off, one of the screws is bent. I’m happy to purchase a new handle and have someone install it. Please see photos attached

We have installed a new sink and it blocked the door hinge. We need to adjust the hinge height to install the door. That requires to cut a hole on the inside of the door to re-position the hinge to a lower point to install the door.

I need someone to instal 2 x Double Glaze Alumnium Windows. The old winbdows will be removed before the installation. Size are around 2.6m x 1.65m Estimate weight: 150-170kg each

Need help installing 2 small dog doors - easy job for someone who knows what they are doing. Thanks