Find experienced local tradies in Liverpool

I need someone to drill curtain brackets and ceiling mount on the gyprock wall. I have all the products ready.

I need the gaps above four internal door frames closed. The gaps vary in height but are relatively small. Photos show the four openings. **Work required:** * Install simple timber or metal framing/support inside each gap * Cut and screw ordinary plasterboard over the gaps on both sides of each wall * Cut the plasterboard neatly so the openings are completely closed * Supply all materials, fixings and tools * Remove any waste after completing the job No plaster setting, sanding or painting is required. The walls will eventually be removed, so I only need a basic, secure closure—not a professional cosmetic finish. Please quote for completing all four doors, including labour and materials. Please only make an offer if you have experience with basic framing and plasterboard installation.

hang up mirror on drywall 500x1000 approx. same area showing in photo

I need my bathroom and laundry ceiling gyprocked, would like it over the top of the old with 55mm cornices, ready to sand and paint, bathroom is 2.3x1.4 and laundry is 1.3x1.6

Fix a kitchen power point. Location is the paper mill in Liverpool

Hi, I'm looking for a licensed and insured electrician to complete a small fit-out in my apartment in Liverpool 2170. Work required: • Install 1 or 2 new double power points (GPOs) – exact number and wall locations to be confirmed on site • Install 2 x pendant lights (light fittings supplied by me). You will need to bring the switches • Install 1 x downlight (fitting supplied by me) What I need included in your quote: - Work carried out to AS/NZS 3000 standards - Testing and a Certificate of Compliance (CoC) on completion I have attached photos of the of the ceiling and the wall where the installation will happen

i need gyprocker and plaster for new build

I have an infrared sauna. The door is loose and air is coming in, which affects the sauna’s performance. I’m looking for someone experienced in infrared sauna repairs or skilled with electrical appliance / wooden enclosure repairs who can: Inspect and fix the sauna door so it seals properly Ensure no air leaks while in use Advise if any parts need replacement and source locally if possible Please note: I don’t have the exact model details, so experience with various sauna brands is preferred. I’m based in Sydney and would like someone who can come on-site to assess and repair.

I need a general servicing of my infrared saunas. We have 2 at our fitness facility

various chips in wall that need to be repaired and repainted to match the rest of the apartment .

Need three holes fixed up from my air conditioning installation

30cm gyprock repair needed in denham court

Replace a fixed glass with awning window 855m(w)x755mm(L). Awning window single glazed with lock and flyscreen. Supply and install

Secure the curtain rail to gyprock ceiling. Must have equipment and be licensed and insured.

Looking to foam (100mm) render outside of my house. About 4 walls, (1) 7*2.4m, (2) 7*2.4m, (3) 10*2.4m (3) 9*2.4m.

Would like the hang this mirror on gyprock wall. Behind the gyprock is brick so it needs masonry bolts/screws weight 16kg

This is for a restaurant that didn't start. A gyprock wall was made for kitchen space. This needs to be remove to bring the shop back to what it was. This gyprock wall has metal base inside. Cables were placed too for few power sockets. All of these need to be removed and bring it back to without this wall. The length of the wall is 587cm in length and 285cm in width. I am attaching the pictures of the wall from outside, inside of that room, power sockets that were attached and the metal base before the gyprock wall was made. Jobs that need to be done here are as follows. - Remove the gyprock wall carefully. power sockets to be removed as well. - Bring the cable out and put it back to roof. - Take off the metal base. - Finish up the roof so that it looks plain as the wall was not here. After the above jobs, I will also need to paint the entire wall to be white. If you can do that job too, let me know. I have separate task for it.

Fix hole in gyprock ceiling sheet in a kitchen, it's about 40+ cm see photo. May need to replace all/part of gyprock sheet, plaster/make smooth again so it's not noticeable.

Tiles were removed from the wall on right side, which was then rendered to even out the surface and waterproofed for tiling. Surface is not flush with original wall and needs to be ground down and smoothed out as we are not tiling that side any more.

Hi I’m looking to get this ready for paint I need corners gyprock setting and patching thanks