Find a furniture refinishing professional near you

Hi there, Looking for an experienced flooring professional to repair and restore a small damaged section of timber floorboards in a 1-bedroom apartment. The damaged area is not large just a section that has worn through and needs blending back into the existing floor. Scope of works: • Repair worn / sanded-through sections • Colour match and blend with existing timber • Light sand where required (not full apartment) • Re-stain if needed • Apply clear coat / polyurethane for seamless finish The goal is to have the repaired area blend naturally so it looks uniform and professionally finished. Please only apply if you: • Have solid experience with timber floor repairs • Can properly colour match stain • Have your own sanding and finishing equipment • Can show examples of similar work Location: St Peter’s Flexible with timing but would prefer done ASAP. Cheers, T

Reoil deck using intergrain ultradeck. Size approx 30m2. As you'll see from the photos, the main part of the deck we are looking to get refinished is the bit at either end exposed to the sun. They have gone black due to sap from a tree above so may need sanding first. If we can avoid refinishing the whole deck to save cost happy to do so, but if that will create an obvious discontinuity then understand it might be best to do the whole deck.

We have Baltic pine floorboards that need refinishing (sanding and polish) They are currently overlaid with vinyl flooring which will be removed before works commence 2 rooms at roughly 30sqm total

Preparing my home for sale and need a few maintenance jobs done properly, before photos are taken. Looking for someone available this week. Happy to bundle everything together. 1. Front door (225×120 cm) – hardwood with glass panels, north-facing with heavy UV exposure. Varnish has faded and is patchy/flaking in places. Needs sanding back and re-coating with a UV-resistant product (2 coats). Previous finishes have lasted about 12 months, so keen for a recommendation for something more durable. 2. Side fence/gate (185×215 cm) – slatted timber screen blocking side passage to rear garden. Significant flaking and bare timber, particularly on right-hand panel. Needs sanding back (including slat edges) and re-staining/varnishing to match the door. North-facing, same UV issues. 3. Living room windows (x2) – gaps have formed where the aluminium frames meet the plaster reveals. Old filler has cracked and fallen away. On one window the gap is wide enough to see the masonry behind it. Both need resealing. Surrounding paint is fine so prefer a neat repair that avoids repainting. This is time-sensitive – the house needs to be photographed for sale by early next week, so I need someone who can start within the next few days. The window sealing and first coat on the door/fence could be done day one, with second coats the following day etc, flexible on that. Budget: $600–$900 including materials. Open to discussion.

6 poles rendered. Premium high end finish. Experienced. 4 x pole 2400x 240 x 240mm .. 1 x pole 2300 x 500 x 150 …. 1 x pole 1200 x 150 x 500 Already finished in blueboard. Ready to go

Looking for someone to sand back and refinish my outdoor timber bench seat, then seal it with a durable natural matte finish. Bench seat is removable and can be taken away to complete off site. I would like pickup and return included. Size Approx 3.0m long x 0.4m wide. Finish required Natural matte, low sheen. Prefer the most durable option for outdoor use. Happy to follow your recommendation, but I am leaning toward a quality exterior decking oil in a natural matte finish for longevity and easy maintenance. Scope of work: - Transport off site - Sand back to an even finish (top and edges, tidy up the ends, bottom if needed) - Prep and clean properly before coating - Apply stain if needed to even out colour, otherwise, clear natural is fine - Apply exterior grade protective finish in natural matte (2 to 3 coats as required, coat all faces including: top, edges, and ends and bottom if recommended) - Return Please include in your offer • Total price including materials and pickup and return • Product system you will use (brand and type if possible) • Estimated turnaround time • Photos of similar outdoor timber refinishing work Timing Flexible, ideally within 7 to 14 days.

Hello! I would like to find someone who specialises in timber finishing who can finish my oak veneer benchtop. And who can also make and install a floating shelf (no brackets visible). The floating shelf would be about 6cm in depth so very small. Have included an ai mock up. The shelf would be 135cm split into two sections. If you’re also able to install a bulkhead above the cabinets (3.5m long) pls also inc that in your quote.

We have removed the carpet from our staircase, and it need sanding and refinishing. Total 15 steps Pls send me your quote price

Refinishing of timber floors (downstairs) in a Reservoir townhouse. Approx 40m2. Refer floorplan I've highlighted in blue the extent. There are some gaps between boards that need to be filled in a few areas. Sand and refinish floors to new condition. Use hardy sealer / polyurethane coat. House has been recently painted and new carpets etc so dust suppression must be used.

Hello, I am looking for a painter or handyman to refinish my front door. The work includes: * Full sanding * Surface preparation * Primer and exterior paint * Finish in a similar colour to the current door I am planning to proceed soon and wanted to check if there is any flexibility on the price. If we can agree, I can confirm the job immediately. Photo is attached. I look forward to your reply. Kind regards, Tonny

I have got timber bifold doors , installed 7 years ago , need repaint as they have faded

Task includes: • Sanding back existing finish (bed frame + slats + legs) • Smoothing edges and corners • Preparing timber for a modern clear or light stain finish Bed is already disassembled and located at ground level. Power tools preferred (orbital sander). Please quote labour only (I can supply materials if needed). Photos attached.

I have approx 35 square metres of floorboards that need sanding back to bare timber. I don’t need them refinished as we will do that.

Outside French doors are very shabby. They need the stain sanded off, new stain to match the existing colour and varnishing..

Interior plywood kitchen benchtops and external timber breakfast bench require resurfacing and refinishing. See photos.

Refinish the bath. No jets, just a standard bath. Its a corner bath. Not freestanding.

Render blueboard wall (2.92m wide x 2.6metres tall=7.6m2). Put mesh material between blueboard gaps. Texture finish in surfmist colour to match outside wall. Thanks

Looking for an experienced tradie to fully sand back and properly refinish internal timber stairs. Anytime between 20th and 25th Jan Details: Approx 14 timber treads (including winders) Existing finish is worn on nosings with a few scuffed areas 2 small gouges to be repaired with timber filler Require full sand back to bare timber (not just a light scuff) Refinish with a high-quality stair-grade clear varnish or polyurethane Minimum 3 coats, suitable for stairs (durable, non-yellowing) Materials to be supplied by you and included in the price Clean, tidy job with proper prep and cleanup Please include in your offer: What product/finish you will use (brand + water/oil based) How many coats Estimated timeframe and drying time between coats Examples of similar stair work if available Home is occupied, but I will be out each day, however walls have just begun painted , so clear communication and care with dust and drying is important. I’ll check quotes later today, will reply then.

I need a small section of timber floorboards (doorway area – see photos) sanded back and refinished to match the surrounding treated floorboards as closely as possible. The area was previously covered by tiles and has old adhesive/paint residue and uneven finish. I’m after a professional result that blends in with the existing floor. Scope of work: • Sand back the existing timber boards to bare timber • Remove all residue/old finish • Prepare surface properly (fill if required) • Stain/colour match to existing floorboards • Apply suitable clear protective coat (polyurethane or similar) • Clean up after job • Supply and apply all required materials Details: • Area size: approximately 1100mm x 1100mm • Location: indoor hallway / door threshold • Access is easy • Photos attached Requirements: • Experience with timber floor sanding & finishing • Own tools and materials preferred • Ability to colour match existing floor as close as possible

I require a Merbau wood deck to be sanded and re-oiled. Size: 3.9m x 1.4m