Find trusted insulation contractors in Inner South Melbourne

Need insulation batts installed for a single room new build both wall and ceiling . 7.5mtsx3 mts room size

Sanding and painting filled holes in weatherboard house. Approximately 180-200 holes.

We would like to add soundproofing between the walls of two adjoining bedrooms. The width of the wall is approximately 4 m.

Remove old insulation and clean the roof cavity. Install new insulation.

Looking for an experienced and reliable person to remove all existing insulation batts from my roof cavity and thoroughly vacuum the attic, leaving it clean and ready for new insulation. Scope of works: - Remove and bag all existing insulation batts. - Vacuum all dust and loose debris from the roof cavity. - Leave the attic clean and ready for the next stage of works. - Remove and dispose of all insulation and waste off-site. Property details: - Single-storey house in Glen Iris. - Easy manhole access with good clearance. - Power available on site. - Ready to be completed as soon as possible. Requirements: - Bring your own commercial vacuum, PPE and equipment. - Experience working safely in roof spaces preferred

Part 1 — Install Supply and install ceiling batts to the front section of the house — approx. 40–50 m², to be confirmed on site - you recommend the product and R-value and briefly explain your choice in your offer This area currently has no insulation; the rest of the ceiling has old loose-fill that stays in place for now Maintain required clearances around existing recessed downlights (older halogen-style — IC-rated covers or clearance as appropriate) and any flues/exhausts Note: two bathroom exhaust fans currently vent into the roof space — work around them, don't cover them Part 2 — Assessment (same visit) Walk the whole house and give me a short written summary (dot points/photos fine) covering: condition of existing loose-fill in the rest of the ceiling (top up, or remove and replace?), wall insulation options for brick veneer, draught-proofing quick wins, and underfloor insulation Itemised ballpark quote for any recommended follow-up work Site conditions — please read before offering: Single-storey brick veneer, tile + metal roof, occupied home Roof void has low clearance in sections plus heating/cooling ducting — some areas are tight Eave sheets suspected asbestos — no cutting, drilling or disturbing eaves under any circumstances Off-street parking on driveway; easy access Materials: You supply (batts + downlight covers if needed). Name the product and R-value in your offer. Timing: Within the next 4 weeks. Weekdays or weekends fine. Done means: Front section fully insulated with no gaps or compression, photos of the finished work, downlight clearances maintained, and the written assessment with follow-up pricing sent to me.

Single story roof space, approx 100 sqm, have insulation - 1 layer sound break 3.1 and 2nd cross layer of 4.1 normal fletcher insulation batts and need to remove some scrappy old insulation. All down lights will be ic4 so can be covered and will have certificate of electrical safety from registered electrician late next week. I can help with the work just need someone with some prior experience in this area

I have 70 sqm 2 bed room small unit house. Have to remove exsisting celing insulation(almost 45 % already removed from celeing) Remaing to be removed and cleaned and place the earthwool insulation baits. I have bought all the materials. Its tile roof. Thanks.

Installation of 70m2 of ceiling insulation Installation of 60m2 of wall insulation

Looking for an insulation installer to install ceiling insulation batts in an existing single-storey home. House approximately 115m² Existing roof space currently has no insulation, I will supply the insulation batts (Earthwool R6.0) Roof space is accessible lots of space to move Vacuum and clean roof space prior to installation, including removal of dust, debris and any loose material where practical Install insulation throughout the entire ceiling area Ensure neat installation with full coverage and no gaps Clean up and remove any installation waste

Put insulation in a garage roof. Product provided. It’s a double garage. Man hole to go through to install.

Install ceiling batt insulation, packs are already in roofspace ready to go. Just need a hand laying it all out. Roofspace has already been vacuumed out.

Bag up and Remove old dusty insulation from attic and replace with new insulation. Attic is accessible by indoor pull down ladder in the ceiling. New insulation is already in the ceiling ready for installation. Approx 30sqm

Install 54m2 of R2.5 insulations batts to sub floor and install duct strapping over insulation to hold in position

Converting garage into bedroom. Need roof insulation installed. Looking for cheaper option as room may later be reverted back to garage. Garage approximately 6m x 3m.

a few hours work installing insulation in roof cavity. hourly rate

house gets hot and cold quickly Looking to improve insulation including roof , under floor, draught proofing

We are wanting insulation installed in the roof and under the floor space (there is access to under the house) to keep the house warm in winter. Need the materials and insulation supplying. Looking for quotes and to get the job done before May time. Attached a photo of floor plan - garage doesn’t need insulation.

Need to vacuum up roof space and remove blow in insulation and old batts in half of unit. Demolition of roof to start mid Feb do renovation.

Hello, I would like to get a quote for improving ceiling insulation in my house. Currently, I am experiencing loud cracking or popping noises from the ceiling, mainly in the morning and evening. The noise is only coming from the ceiling above my bedroom and does not occur in other areas of the house. I understand this may be related to temperature changes and would like to focus on improving insulation only above the affected room first, if possible. Property details: * Roof type: Tiled roof * Approximate ceiling area above the master bedroom: estimate only * House layout: 3 bedrooms, built in 2009 I am looking for a practical and cost-effective solution. Could you please advise: * Whether partial insulation above one room is feasible * Recommended insulation type and R-value * Estimated cost Thanks,