Find a professional gate installation in Coomera

A 3.5 to 4 metre wide sliding remote gate across drive way. Cheaper options, timber? Example is a neighbours gate.

Had to cut concreate drive way to repair a water leak. Need the cut reconcreated I understand it will never be a perfect match with the aggregate but as close as we can will be good. Area 700mm ×700mm + 300mmx 400mm

Due to wind, 1 of my 2 gates has broken hinge and fallen off. The job is to put it back in place with new hinges. I’ve just held it in place with wire.

Need a small black metal type fence with a sliding gate for front entry of house, approx 420cm x 220cm (660cm total) x 110cm high. Needs be fitted onto concrete and soil, see images.

I need a exposed aggregate concrete foot path supplied including material and labour, as per the attached images

Need to urgently remove Rain water tank from property.

Next to install a child gate

Exposed concrete finish, 3mX350mmX100mm

Installation of Aluminium gate on the side of the house. Requirements for the gate by Stockland have been attached. Colourbond material is not allowed. Would it also be possible to install a digital lock? I can supply the lock.

Attach pedestrian gate to existing brick entrance

We need a gate with the following specs Dimensions of opening: 1190mm wide x 1900mm high ( gate may be smaller) Design: Horizontal slats Slats: 1 inch thickness, 1 inch spacing between slats Lock: Lockwood Type 4 Color: Surfmist Orientation: Opens outward towards street

Needing these few broken slats replaced on gate. As shown in picture, not a fancy gate, even open to second hand wood to be used.

Removal of fence to allow builder access to build garage. Relocation of gate for security of neighbouring dog.

gate not closing correct very hard to open and close needs to be fixed - Due date: Flexible

Remove current aluminum slate door and install new ones - Due date: Flexible

Three gates in total need to be assembled and installed. Two double gates need to be fitted. One side swung off the side of the house, wall plate needs to be fitted. Other gate needs to be swung off a 4x4 post that will need to be attached to the current retaining wall. As gates are a pre-made size but unassembled they will need to be trimmed to size before assembling and fitting. Gates are colourbond steel and will need to be cut with metal cutting equipment. Gates have drop pins in middle so holes will need to be drilled in cement. 2nd smaller gate, also colourbond will need to be trimmed to size before assembling and fitting. Gate will need to be swung off original post as there is a wooden gate currently fitted. - Due date: Needs to be done on Monday, 30 October 2023

I need help to replace the roof sheets on my patio, the existing one is made of steel. I would like to replace them with tinted polycarbonate ones to get more sunlight. I can source the sheets myself, just need an indication on labour costs so I could work out the budget. The roof size measures around 15m x 4.8m Ideally you will help replace all the sheets and take the old ones to the tip. Given budget this can be done on asap basis. Upper Coomera 4209 - Due date: Flexible

The gate has been pulled out of the wall, I need a new latch, the blind cord is broken and needs to be replaced and the smart door handle needs to be fixed - Due date: Flexible

Fix wooden side gate, currently scraping wall. Solid gate and fence posting so don’t wish to replace, think just needs new hinges and re-set - Due date: Needs to be done on Sunday, 8 January 2023

We have a fence that is 4.6 m wide. We are wanting a double gate installed for side access. Happy to supply all material needed - Due date: Flexible