Find experienced local fencing contractors in Berwick

Garden wooden fence 1.8m (no cap on top) posts broken in 2 sections of the fence, and a 13m stretch has fallen down. 1) Need to replace the broken/damaged post (not more than 6pc 125mm x75mm 1.8m high) and 2)demolish/remove a straight section of 13m fallen down fence and rebuild it (post defined in section 1 above, to do the 3 horizontal frame and add palings (100mm x1.8m and 150x1.8m palings) 3) Remove fence rubbish Photo notes: 1- first photo is the 13m stretch where there are 6 posts and the 4 in the middle are broken. ie. you have to demolish that fence (possibly in 5min by cutting the 3 horizontal fence rails on both ends, and the fence will fall down). I think that the end posts are still viable, or at least one (I'm not a fencer), making it 5 posts replacement at the most. If both sides are viable, you can install 5 posts to replace the 4 broken posts (saves you digging up the concrete for the 4 broken posts). Leave that to your creativity. 2- Second photo shows a broken post with the fence still on it. Actually the fence has 'detached' from that broken post and is being propped against it from the other side. The broken post is therefore a 'stand alone' post and I would like it replaced that post and attach back that fence. 3- 3rd photo shows two piece of fence wood used to prop the fence against the broken post shown in photo number 2. If you remove the props, you can 'demolish' that broken post (see photo 2) with 1 hand. Need a replacement post. Hence, my estimate of just treated wood material for the 1.8m fence is: 6 x 100mmx100mm posts, 3x13m fence rails, and 100mm & 150mm treating palings for 13m.

The job includes: - Supplying and fixing four steel fence panels onto an existing timber boundary fence/wall (see images for fence panels) - The steel fence panels can be either new or second-hand, as long as they are in good usable condition - Cutting down two trees that are growing close to the timber fence - Tree stump/root removal is not required.The cut-down trees do not need to be taken away. - Installing two cat doors into timber bedroom doors. The cat doors have already been purchased Please contact me with your availability and an estimated quote including materials.

We have a dog kennel that need to be built. It has an instruction manual and all the materials to put together but we are struggling to put together.

Please note budget is just a Guesstimate. Have 5 dogs. Need to separate backyard from front yard. Approx 29metres in total. We want at least 1.2m height. Will need 2 pedestrian gates. Need cheap but solid enough to cope with big dogs, no gaps underneath or in between for small dogs. Would love this done in the next couple of weeks. Ideal is composite timber batten fencing but not sure if that can be done soon or not. We do have a curved area that has edging that needs to be followed.

1.5metre high colour bond fence for about 10metres in the front yard

Around 6metres long colour bond fence in the front yard. No gates necessary. Trees in the photo will be removed.

Install New colour bond fence for about 10metres .1.5 high. Need a quote please. Will be cutting the trees. Thanks

Description: Looking for an experienced handyman/fencer to install a secure side access gate at my property. Scope of work: Supply and install 1800mm high Colorbond steel gate (to match existing fence – likely Trimline profile) Gate to be fitted between brick wall and existing metal fence (narrow side passage) Install adjustable steel gate frame + Colorbond sheets OR pre-made gate (open to recommendation) Install double-sided mechanical keypad lock (code required from both sides) Install 3 heavy-duty hinges + hinge bolts (to prevent lifting) Install and align latch/striker plate properly Ensure gate is level, secure, and opens smoothly inward Install internal drop bolt for added security Key details: Opening width is approx. ___ mm (to be confirmed) Gate to open inward toward property Installer to supply and install steel gate post if required (core drilled or concreted) Ground surface: ___ (to be confirmed – soil/concrete/pavers) Requirements: Experience with Colorbond or metal gate installations Must have experience installing double-sided keypad locks on gates Ability to measure accurately and advise on best fit Must bring own tools Clean, professional finish (minimal gaps, solid install) Materials: Open to: You supplying all materials (preferred), OR I can purchase from Bunnings based on your list Lock requirement: Must be a quality mechanical double-sided keypad lock (e.g. Borg / Gatemaster or equivalent) No basic latch locks Workmanship expectation: All fixings to be heavy-duty and suitable for metal Final install must be level, aligned, and free from excessive gaps or rattle

Hi, I’m looking for an experienced fencing professional to supply and install a Colourbond fence with a gate on the side of my house. Details: - Total width: 2 metres - Gate width: 1 metre - Material: Colourbond (preferred colour can be discussed) Scope: - Supply all materials - Install fence + gate - Ensure durability, proper alignment, and clean finish Please include in your offer: - Labour + material cost - Any warranty details Looking forward to your quotes. Thanks

Remove existing wood fence, install colour-bond fence to approximately 2 mtr high Bottom plinth to be concrete not timber

Fencing on one side with 1.8m precorrugated sheets colorbond woodland grey or color matched fixed to timber frame with 45 degree pyramid shaped top with a timber peak fence capping: approx 14m + side gate. You buy materials + labor

Im looking for a quote on replacing our fence with a new colourbond fence. Height(using extensions if we have to) of no less than 2400mm. Want to avoid having to do a permit. Location is Hardy Court, Berwick, we have permission from neighbors, and fence is easy access from both sides (other side of photo is actually a roadway), are you available to provide a quote? - 21m long and yes please dispose old fence

Replace the old 4.5M fence with color bond fence and with timber underneath. Dispose old fence

Update: Length is 35 Meters, Height is 1.8 meters. Hi, Last 2 days of wind has taken down most of the fence. We are looking to replace the fence either with Timber or Colorbond. Can. you please provide the quote for both material and installation together for both Timber and Colorbond option?

Require a colour bond fence on the side of the house. The current fence is falling

Remove old timber fence and replace with sleepers & colour bond fence to Hight 2.3 meters 19.5meters long

I need a color bond fencing done. 21 m

Need do fencing at our new house. It's required that get it done as picture shown. Colorbond fence with the same colour. total Roughly55- 57meters. Please give a quote for it and when you can do it. - Due date: Before 2023年6月25日 星期日

- need to replace front wooden fence with 1.8 metre Colorbond fence with materials supplied and installed - old fence disposed - replace existing wooden pedestrian gate with automated swing gate - Due date: Flexible

Fencing to two sides. New estate - Due date: Before Monday, 22 May 2023

New colorbond fence required to rear boundary of unit. No existing fence to remove. Approx 12m - Due date: Flexible