Find experienced local carpenters in Bellevue Hill

Replace 96cm wide cupboards with 3 if these 68cm wide drawers. I have everything for the drawers but will need you to buy to add fill on either side due to the size difference

Joinery removed from wall and installed in different room

I am looking for an experienced curtain maker or soft furnishings specialist to supply, make, and install new sheer fabric curtains for wardrobe joinery doors in a nursery. I have attached reference images showing the exact look, colour, and fabric feel I want, as well as images of the current joinery and existing curtains that need to be replaced. This is a detail-driven job and needs someone confident working with custom joinery. Scope of work – Remove existing curtains from wardrobe joinery doors – Select and supply appropriate sheer fabric to match the reference image (colour, texture, and softness are critical) – Fabric should be natural-looking, soft, and refined (not shiny or synthetic-looking) – Make new sheer curtain panels to fit existing joinery frames – Install new curtains neatly and securely within the doors – Final result should closely match the reference image in tone and finish Key requirements – You must be able to source and supply the fabric – Strong experience with custom curtains and joinery installations – Excellent attention to detail and finish – Comfortable working in a nursery and finished home – All work must be secure and baby-safe Timeline – This job needs to be completed within 1 week – Please only apply if you can meet this timeline Location Bellevue Hill, NSW Ideal person – Experienced curtain maker or soft furnishings professional – Confident advising on fabric selection – Efficient and organised, able to work to a short deadline – Professional, tidy, and respectful in a high-end residential space Please include examples of similar curtain or joinery work if available, and confirm you can complete this within one week.

I am looking for an experienced seamstress or curtain maker to create custom gathered sheer fabric panels for wardrobe joinery doors in a nursery. Reference images are attached. The first image shows the overall look and softness I am aiming for. The remaining images show the supplied fabric and the wardrobe location. Scope of work – Create 7 custom sheer fabric panels – Finished panel size per panel is 30 cm wide x 1.3 m long – Fabric must be cut wider than the finished size to allow for gathering on the rod – Panels are to be gathered on the rods, not pleated or stitched – Gathering should be soft and even, creating natural vertical ruching Construction details – Each panel to have a straight top and bottom with sewn-in rod channels – Rods will run at both the top and bottom of each panel – Fabric will be gathered along the rods to achieve fullness – (Bottom rod will be added by me to keep fabric aligned) – Finish should feel soft, minimal, and relaxed, not structured – All construction must be secure and baby-safe Fabric – Lightweight sheer fabric supplied by me – Fabric is delicate and semi-transparent – Experience working with sheer fabrics is essential Measurements – Finished visible panel size: 30 cm wide x 1.3 m long – Number of panels: 7 – Fabric to be cut with appropriate extra width to allow for gathering – On-site measurement required to confirm final dimensions and rod placement Rods – Rods installed top and bottom – Open to advice on rod diameter and sleeve size to ensure smooth gathering Location Bellevue Hill, NSW Ideal person – Experience with custom curtains or soft furnishings – Comfortable working with gathered sheers and rod pocket finishes – Strong attention to detail and clean finishing – Able to measure, make, and install Deliverables – On-site measure – Sew 7 gathered sheer panels with top and bottom rod channels – Install neatly and securely Please include examples of similar sheer or gathered curtain work if available.

I have a timber wardrobes with doors that are scrubbing the drawer below. I need the hinges adjusted so it all works smoothly. I’ve had it adjusted many years ago and it needs it again.

We have new ikea kitchen and the bench tops are too long and the sink hole needs to be cut in plus a bathroom door rehung

Strip back to bare & re stain in oil based varnish console measuring 240cm x 40cm.

Current under sink is water damaged. Replacement doesn't need to be wood, as long as it blends with the overall kitchen. I'd prefer something less prone to water damage. Cabinet Dimensions: Height: 106.8cm Length: 54.3cm Width: 77.5cm

I need just one core hole drilled into a piece of joinery at my home so that my wife can run her power cables through to the powerpoint. Landlord would prefer a professional who will do this clean - as the place is a rental

Carpenter – Bedroom Cabinetry Quotes Looking for an experienced carpenter to quote and carry out cabinetry work in a 3-bed apartment. Focus is on the main bedroom to start – need creative ideas and execution to maximise storage and improve layout. May extend to other rooms depending on scope and budget. Must be reliable and detail-oriented. Happy to pay market related price per item or day

Old kitchen and bathroom surfaces need re-staining with same old colour. Zone cabinet doors need new hinges. A couple of doors are broken and need repairs.

Purchase timber, cut and install edges to kids swing set on three sides

Looking for someone to attach 6 replacement desk drawer faces. The new parts are shown in the photos and the main issue to me is accurate placement and alignment. Happy to answer any questions. Mark Note: I estimate less than 1 hour to complete task.

We are getting a new wall oven which is about 5mm to high for the space it's going in. We need a carpenter to come and trim/cut the bottom of the cabinet so it fits.

Install weather stripping under front door and cut a piece of wood to go under the microwave

I have a timber bed frame and the bracket that holds the centre beam has rotted and I’d like for the beam bracket to be screwed in above the old spot on the headboard and the foot board. Then you will need to move up the side rails to match the new centre height.

Need a manhole to be made in floorboards so pesn can access u see the house. Then need to be able to put the fkoorboars or covr back over manhole

We have old lino floors in our kitchen which we want to remove and get back to the wood floor underneath. There is a rubber underlay under the lino which is stuck down. We aren’t removing our kitchen cabinets etc, so it’s really only a 12-15m2 space that needs to be completed. The floor will need to be sanded and refinished. I’ve also included a picture of another room where we had the floor refinished. The wood in the kitchen is the same as this.

I need help cutting the side/ back of this ikea shoe cabinet, so I can fit it over my skirting board (don’t want to cut the skirting), so this is the solution. Skirting board is 24 cm. You’ll need to cut 12cm from each side in 2 cabinets. Quick job if you’re around, we just don’t have the tools.

Install child restraint gate at top of stairs. Electric drill and experienced user required. - Due date: Before Thursday, 25 January 2024