Hire a trusted appliance repair service in Richmond VIC

Hello, I have a LG Washing Machine 8KG Direct Drive which the motor has stopped running. This is causing a ‘LE’ error to appear and the machine has stopped draining/spinning properly. I have attached a photo of the error on the machine.

Washing machine fixing, is not finishing its cycle and is making loud noises. Esato front loader machine

Washing machine is showing an error and not draining.

The dryer has not been collecting water in the tray. Cant use the timer settings only auto dry. Fisher and Paykel Model DE8060P2 8kg Series 7

I have two white goods with broken plastic parts that need repair / refitting. 1. Dishwasher handle cracked a number of years ago. Someone from Airtasker fixed it at the time, however it’s coming off again and time to reassess the solution - one that will stand the test of time again. This will require a few odds and ends from Bunnings - you can see from the last fix-it job the type of parts. Budget should be all-inclusive and no additional charges. 2. The spacer snapped off the back of my dryer while refitting it to the wall. I have bought a replacement. It appears that the washing machine needs to be taken off the wall, new spacer fitted, and returned to the wall. I can assist with holding it, but let me know if this sounds correct. Model numbers: Dishwasher - Dx203wk Dryer - edv6552

Changing bulbs didn’t work so there’s something deeper that needs fixing. I exposed the area that needs further investigation but without an electrical license I can’t proceed. If you can find and replace the broken part and get the lights to work I can put the range hood back together. All bulbs for a millisecond went on as I was handling them. I suspect it is the part in the last photo (is that a transformer?). It feels extremely hot. The model of my rangehood: APP/N : Q02656 MODEL: 87978 SN: RI0158455

The drum has come a little loose and rattles on the drying cycle it’s most obvious

Chain on rowing machine backs up and makes clicking noise. Might need replacing?

Washing Machine makes a buzzing electrical noise, has some burning smell. Halfway through wash, it turns off by itself. (Washing machine was transported on its side by another airtasker)

Roller shutter service as the shutter does not move.

We believe something is stuck under the barrel of our washing machine, so whenever we run a cycle, the machine makes loud grinding/clanking noises when the barrel spins. The washing machine is a Euromaid 7kg Front Loading Washing Machine - WM7PRO

Washing machine is not leaking from the door but the bottom front right and left when it is running. Nothing is blocking the drain and no error code.

Have a dryer here, still heating but not turning/cycling. Can someone help fix? Richmond location

We have an F70 error on our smeg dishwasher that need to be fixed

Smeg Dishwasher stops mid cycle and lights blink

My washing machine is having issues with starting the cycle straight away, and finishing the cycle. It isn't draining properly either.

Our Westinghouse WFE642SCB Oven has stopped working. The stovetop operates as normal, but when we turn the dials to turn on the oven and grill compartment they do not turn on. Unsure of the reason for the fault. Oven was installed within the last five years and has not previously had any issues.

1. I have 2 cameras already outside on balcony, I now need 2 small solar panel put next to the cameras and plug in. They are brick walks 2. I have a wall clothes hanger to put in laundry - it will be attached to brick parts of the laundry wall. It’s about 108 wide, 137 night and 52 deep with 3 shelves. 3. One of my indoor doors doesn’t shut properly - think it just needs adjusting - only slightly

My kitchen range hood has become very noisy and the light has stopped working. Need help repairing this. Please include all inclusive costs in your offer.

Kitchen-aid KDSSM 82130 model is not draining. I believe there may be a wine glass broken in the drainage pipe but it requires further investigation. Have tried to self-fix but I cannot work it out. Not sure on how much this would cost, open to offers.