Hire a trusted appliance repair service in Moonee Ponds

Need a Schwinn IC8 exercise bike serviced. Very noisy when peddling and it seems to be slipping at times.

My recliner is stuck in the extended position and will not retract. I can see power to motor is available as both a blue and green light are visible when buttons pressed.

We need someone experienced in repairing commercial kitchen equipment. We have two commercial toasters: -One toaster has a loose top section, needs to be secured and repaired. -The second toaster is working, but the power cable is damaged and needs to be replaced or repaired safely. Please bring any standard tools required. If additional parts are needed, let us know before completing the repair.

Diagnose and repair water leak in Samsung fridge - Model SRF9300BFH Reoccurring water leak after we cleaned drain and defrosted to continually have the same issue. Noticed resolved by turning ice machine off. Potential cracked hose related to ice machine requiring replacement.

Westinghouse oven screen has gone black, oven still seems to work but need the screen to be able to set timer and the clock. Have tried turning power off and also holding the buttons but doesn’t work.

While using my dryer today, it started making a squeaky noise, and we noticed a faint burnt smell. We’ve stopped using it just to be safe. But we need someone to come out and look at it and hopefully fix it. Thanks Josephine Model: Simpson 5.5kg SDV556HQWA

Clothes Dryer machine doesn’t stay on after putting on a cycle as it comes up with a “full tank” error when the water tank is empty.

Commercial dishwasher need to be fix. Not getting drain. And not using drying chemical.

I have an older gate motor (ARCO P/L LI-2B Ver 2.7) that works perfectly via the wired manual button, but the remote range is non-existent. I’ve already replaced the antenna with no luck, so I’m looking for someone to bypass the failing internal receiver by installing a new external universal receiver kit. The Job: • Supply and/or Install: Wire an external universal receiver into the accessory terminal block. • Wiring: Connect to the 12/24V power and the OPN/GND trigger terminals on the board. • Testing: Program and test new remotes to ensure a reliable range of 15m+. Note: I’ve already confirmed the board is functional; this appears strictly to be a receiver/range fix. Quote for labour only, parts extra.

Washing machine is broken, need to be looked at by a professional

The power button can't be pushed, I think it's just a faulty button and should be quite simple, but obviously don't know for sure. Haier - HWF75AW2

Help with fixing my washing machine please 🙏 It’s frozen half wash - there are clothes in there with a lot of water, but it’s not draining. And the door is locked, so can’t open it. I’ve tried turning it off at the socket. When I turn it back on, the door remains locked. I’ve tried turning it to “drain” or different settings, but it remains idle.

Description: Bosch Rotak 43 electric mower TYP 3600H81340 (240V, 1800W). One of the male power inlet pins has snapped off. I have already disassembled the handle and exposed the switch/inlet assembly (see photos). Looking for someone experienced with small electrical/appliance repairs to: 1. Replace the damaged mower-side inlet 2. Reconnect wiring properly and safely 3. Reassemble and test operation ⚠️ This is mains power (240V). Looking for proper, non-temporary fix. Preference for electrician or experienced appliance repairer. Parts: Not supplied — please bring suitable inlet. Location: Moonee Ponds (Feel free to take away for repairs) Timing: Flexible Notes: Mower otherwise in good working condition. All parts are disassembled and ready.

My son’s light sabre has a battery that has died. It needs crimping with a replacement battery I’ve already purchased. It needs someone with a lot more electrical expertise than myself to have a crack at this

We are a busy fish and chip shop in Moonee Ponds looking for a licensed gas fitter or commercial kitchen technician to inspect and repair a commercial gas fryer. Equipment: Oliver 5-vat commercial gas fryer. Issues needing inspection: 1. One fryer vat appears to be leaking oil from the body of the fryer. 2. One fryer pilot ignites but does not stay lit once the knob is switched to ON. Pilot remains on while held down but turns off when released. 3. One fryer ignites normally but periodically shuts off during operation. The fryer is currently running but we want these issues properly diagnosed and repaired. We suspect possible issues such as: • Thermocouple replacement • Pilot assembly issue • Gas safety valve • Burner / thermostat issue • Possible fryer vat seal or drain issue Looking for someone who: • Is a licensed gas fitter or experienced with commercial kitchen equipment • Has experience working on gas fryers • Can provide a proper diagnosis and repair Location 📍 272 Maribyrnong Rd, Moonee Ponds VIC Access Shop operates during the day but repair can be done outside peak hours if needed. Parking at rear. Please include: • Your experience with commercial fryers • Availability (ASAP preferred) • Your call-out fee or hourly rate Budget Open to reasonable quotes.

Leather electric 3 seater recliner, 5 years old. One of the 2 recliner seats won’t revert back to default position although the lumbar support and head rest still function.

I have a new washing machine seal that needs to be fitted

There’s a fridge that has some shallow dents on it. Would like to try to return the surface to completely flat, if possible!

Freezer not working properly. Appear to be an air flow issue. You will hear the ventilation going on for a bit and then it will stop altogether.

Washing machine turns on and washes clothes normally but does not drain water. Likely issue with the drain pump or drainage pipe. Need inspection and repair.