Find a reliable appliance technician in WA

My kitchen rangehood is not working. The light works, but the fan/motor does not turn on. I need someone to come and inspect it and diagnose the problem.

We have a stove top currently that we are wanting to replace with a new one - replacing like for like. Connection is already there, require a licensed gas fitter - price to include disconnect and reconnect new one leak pressure testing and any required compliance work. May require slight cutting but not sure - we tried to move the old one and now there is a gas smell coming through from underneath

wanting to get them both installed in a bathroom

Hi! Had our old electric stove fail on us, so got a replacement second hand, just looking for an electrician to come by and disconnect the old one and wire in the new one, quick and easy hopefully. Pictures as shown of the old and new. Thanks!

I need a qualified, licensed professional to convert my kitchen cooktop from electric to gas. Need to remove electric cooktop and disconnect the electric connection through the mains. I think it’s also necessary to perform a pressure/leak test

Need to cut out a bigger even rectangular hole in the cabinet and install new dishwasher.

Need an old dishwasher removed and a new dishwasher in the box installed in the same spot. Disposal of old dishwasher would also be preferred.

Disconnect and re-connect a 90cm dual oven,

Gas pipe to oven and plumbing to mixers pay will obviously be what you charge for the work

Help disconnect stuck gas heater hose/fitting I have a gas heater with a hose connection that is stuck and I can’t get the fitting to release/disconnect. Looking for someone experienced with gas appliances or gas fittings who can safely disconnect it without damaging the heater, hose or connection. Please bring any tools required. Ideally looking for a licensed gas fitter or someone with appropriate experience. Located in yokine

I need my Elex massage chair to be moved from one room to the next(about 5 metres)

I need an experienced solid plasterer/rendering professional to repair the outside face of an existing oven recess in my kitchen. The inside of the recess is NOT being plastered and will remain exposed brick. The work is to repair the damaged areas around the opening, including the sides and top, build up/level the surface where required, and finish it flush with the existing wall and smooth/ready for painting. This is an older brick/masonry wall, so I’m specifically looking for someone experienced with solid plaster/render repairs over brick, rather than someone who mainly does plasterboard. Materials to be included in the price. Photos attached. The job is ready to be completed now. Please provide a quote and, ideally, examples of similar brick/masonry plaster repair work you’ve completed.

I cant get this hose out of the wall. If someone could help that would be so good.

Repair fridge sound and check leaking water from fridge

I need someone to fit new washing machine seal as old one has been damaged i will have the part by next Wednesday so labour only washing machine 2 month old haier its already had old seal removed and front is off just needs fitting and putting back together

Hi, I am open to offer I want to install a new connection of gas stove to gas pipe with all fittings Now , electric stove has installed which has to be remove then install gas stove and install fitting to connect with gas pipe I will provide you the gas stove Bench cut size 55x49 Location Wheatley st gosnell Installed gas pipe that comes under the bench has dead end cap with no regulator or fittings so pls keep in mind you have to install regulator and fitting to make a connection with gas stove Thank you

Kitchen Renovation – Brick Cut-Out Required for Oven Tower I am currently having a kitchen renovation completed and we are looking to install an oven tower. The oven tower will include drawers underneath the oven, with a microwave space above it, as marked in the attached photo. To allow the oven tower to be installed, some brickwork will need to be cut out above and below the existing oven space. It is highly likely that a lintel will also be required to support the weight of the brickwork above. The kitchen company is able to supply and fit the oven tower, but they are unable to cut out or remove the required brickwork. We are arranging for an electrician to remove the oven, but we are looking for someone who can assist with: Cutting out/removing the required brickwork; Installing or allowing for a lintel if required; Disposing of the removed bricks/rubble; and Preparing the space for the oven tower installation. The cut-out can be no higher than 1900mm from the floor, and the width will need to match the width of the oven tower/frame. Ideally, we would like this completed as soon as possible from Thursday 6 August, as the kitchen renovation is expected to commence from Wednesday 12 August. I am based in Palmyra and would be happy for you to come and inspect the job beforehand if that helps.

Previously had a dish drawer, which has been removed, want to install a freestanding dishwasher, so require the drawers & metal below to be removed.

Freezer isn't working, the temp is only at 26 degrees and won't go down to minus. Might need re-gas. Located in Coventry Village, Morley.

Seeking licenced gasfitter to disconnect gas from old Andi 60cm freestanding oven and connect gas to new Westinghouse 60cm freestanding oven (model no. WFE616DSC) - hopefully a quick job.