Find a reliable appliance technician in WA

Install dishwasher near a kitchen sink. Oven stove to be dismantled and replaced by dishwasher of similar size. Dishwasher available.

Dryer drum not spinning but motor runs Might need to replace drum belt

Cable just snapped near the engine and it looks frayed at the connection, but may beable to pull it through and reattach instead of replace it entirely. Quote is for labor, happy to pay for the new cable/parts if required with receipts.

Isolation valve to dishwasher isn’t isolating. Need a new one, I don’t trust me unscrewing this from the copper pipe. I have a new valve already.

Wall-mounted Fisher & Paykel DE5060M1 dryer won’t start on its own. It hums but runs if the drum is manually spun first, possibly a capacitor issue. Need someone to: * Remove dryer from wall * Diagnose and repair * Reinstall and test

LG Thinq washing machine needs filter clean

I cannot figure out how to get the metal retaining ring to hold onto the rubber and not come off

Mower has been sitting battery flat and struggles to start when battery was charged. Needs new throttle cable. Only done 70hrs work so should be an easy fix

Need a handyman who knows how to level the washing machine properly it’s not level must have there own tools . Thanks

Fridge is leaking water at front left-hand side base of unit. Need a diagnosis and pricing to repair. See photos.

Hi, I need licensed gas plumber to replace existing external continuous flow gas hot water system in Dianella. Like-for-like replacement: Old unit: Dux GK2620 New unit supplied by me: Dux 21ENG5N (Natural Gas) Existing gas/water connections already in place (20mm). P ower point already available nearby. Need installation, commissioning and WA gas compliance certificate.

Please assist me connect a dishwasher outlet.

Stack dryer on top of washer (with stacking kit) + remove packaging I need someone to install a stacking kit, mount a dryer on top of my washing machine, and remove the packaging. Appliances: Hisense 7.5kg Series 3S Front Load Washer (HWF3S7514X) — already installed Hisense 8kg Heat Pump Dryer (HDFS80HS) — needs to be lifted onto the washer Hisense Series 3S Stacking Kit – White (HPSS3) — needs to be installed between the two units to secure them together What's involved: Install the stacking kit bracket onto the washer Lift the dryer onto the washer and secure it with the kit Remove the cardboard boxes and plastic packaging shown in the photos and take them away for disposal Access: Ground-floor house, no stairs Parking available right in front of the garage Notes: Please bring your own tools — I'm not sure exactly what's required, so check the stacking kit instructions if possible (likely a screwdriver/spanner) Two people may be needed to safely lift the dryer Photos of the appliances and packaging to be removed are attached Please quote with everything included (labour + rubbish removal).

Washing machine has been installed to new home, purchased an extended wastage pipe and installed from machine to under sink. Washing machine is now leaking underneath. Cold water hose also needs tightening/tape as there is a slow drip

Bosch series 6 dishwasher E31 with tap symbol

Need urgent fix of leaking washing machine tap. Movers took machine out yesterday and came back to discover leaking tap

My Westinghouse dishwasher has recently stopped working with an error code F1. I require someone to have a look and fix this issue please.

I need an experienced installer to remove an existing integrated dishwasher and install a new Bosch fully integrated dishwasher. The current dishwasher (ASKO) was poorly installed and appears to have been forced into the cavity, causing damage to the cabinet panel and adjacent cupboard. The original dishwasher (Miele) previously fit correctly, so the space should work with proper alignment. ⚠️ This is not a standard swap job. Scope of work: * Carefully remove existing integrated dishwasher (tight fit) * Install new Bosch fully integrated dishwasher (already delivered) * Attach and align existing cabinet door panel * Level and centre appliance properly * Ensure even spacing on both sides * Ensure door opens fully without rubbing cabinet * Do NOT force unit into cavity ⸻ Important (corner installation): This is a corner position, so door clearance and spacing are critical. A small adjustment (e.g. 10–15mm filler strip or repositioning) may be required to allow proper fit. ⸻ Looking for someone who: * Has experience with integrated dishwashers (not just freestanding) * Understands cabinet alignment and spacing * Is comfortable making minor cabinetry adjustments if needed Please confirm your experience with integrated installs when quoting.

I’ve got my stove gpo that isn’t working. So far I’ve only tried a charger in the port and looks like power doesn’t come through. I need someone to look into it and fix.

Hi, Our Samsung Family Hub 2 Fridge is causing tripping. I have isolated all the points/plugins and isolated the issue to Fridge. connected fridge to 3 different plug points, it still tripped.