Hire a trusted gas stove repair and installation service in North West Melbourne

Our cooktop is not levelled and unbalanced. Needs to be refitted. Will also need sealant on the edges as there are gaps

Kitchen & Butler’s Pantry Plumbing – Sink Replacement, New Sink & Gas Cooktop Removal Looking for a licensed plumber/gasfitter to complete the following works at our home: Main Kitchen Remove existing undermount kitchen sink. Install replacement kitchen sink. Remove existing tapware and install new tapware. Complete all required hot/cold water and waste connections. Test and leave fully operational and watertight. Butler’s Pantry Install new single-bowl top-mount sink into existing benchtop. There is currently a small hole in the benchtop from a previous water filtration system which will need to be enlarged to suit the new sink. Install new tapware. Complete all required hot/cold water and waste connections. Test and leave fully operational and watertight. Sink and tapware will be supplied. Gas Cooktop Disconnect and remove existing gas cooktop. Permanently cap the existing gas supply. Test gas installation following works. Provide Victorian plumbing/gas compliance certificate for the gas works. Please advise whether you can also complete the required benchtop cutting/modification or whether this will need to be completed separately by a stonemason. All new sinks and tapware will be supplied. Please include labour, plumbing fittings/connections, removal of existing sink/cooktop and compliance certificate in your offer.

Removal of a Gas 900mm gas cooktop as we are converting to induction, will also need the gas capped with compliance certificate

Need my gas stove top replaced. I have purchased a new already just need in stall by a licensed gas plumber

Licensed gas plumber needed to safely disconnect the gas cooktop and close off the connection. My location is Fawkner.

The large gas burner isn’t working. It won’t ignite using the knob. If I light it with a lighter, the flame comes on, but it goes out as soon as I release the knob. The other burners are working normally.

Red flame, unstable, only one of 5 is working. I need someone to fix my Bosch gas cooktop, 5 burners please. Serie 8.

Need gas connected and hard wired electrical for a 90cm free standing brand new Westinghouse oven

Technika gap cooktop Continuous sparking of the ignition spark plug when gas off and one ignition spark not working 5 burner cooktop

Need to replace my gas stove

Looking for gas plumber to connect cooktop. Location: Sunbury. Certificate required. We’ll only supply Bosch cooktop PPQ7A6B20A. Model: You would need to bring 900mm to 1000mm flexible gas hose, regulator (if required for this cooktop), isolation valve, elbows etc. Please see pictures.

90cm Gas Cooktop Replacement Looking for a licensed gas fitter/plumber to remove my existing 90cm gas cooktop and install a new 90cm gas cooktop. Job Details: * Remove old 90cm gas cooktop * Install new 90cm gas cooktop (same size) * Connect and test gas supply * Ensure installation complies with Australian standards * Dispose of old cooktop if possible (please specify any extra cost) Location: Glenroy VIC 3046

Old gas cooktop has been removed new one to be fitted same size

I have a smeg gas stovetop with four burners. 3 of the burners work just fine, however the largest burner will not operate on low. Turn it to simmer and the flame goes out. It does work but needs a service.

The gas on my stovetop is delayed coming out. Sometimes you need to leave it on for 5minutes before any gas comes out, but it will always start eventually despite being delayed. Need someone to come have a look at it and fix it please

Need help to replace new gas stove igniter. Old one is broken. I have a parts .

Hi, my gas stove , one burner is not working and other is producing black residue on all dishes/pots. It needs to be fixed. Looks like issue with the burner . Leaving all my dishes and stoves dirty. Its a cookrite brand.

Looking for a licensed gas fitter to replace an existing gas cooktop with a new one (same location). I have already bought a replacement cooktop. The gas inlet for the new cooktop is on the left whereas the current one is on the right. The gas copper line comes from the left so assuming it just needs to be shortened? Requirements: - Must hold a valid Victorian gas fitting licence - Must be fully insured (public liability) - Must provide a Gas Compliance Certificate upon completion Thanks!

Hi, I’m looking for a qualified plumber to assist with the disconnection and installation of a new freestanding dual fuel oven at my property in Gladstone Park. The job will need to be completed in two stages to allow for cabinetry alterations. Details of the Job: Stage 1: Disconnect the existing Smeg gas cooktop and oven. Discard the old unit if possible. Stage 2: Install a 90cm Westinghouse dual fuel oven once the cabinetry has been modified to create a cavity for the new unit. Requirements: Must be a licensed and qualified plumber. Experience with gas cooktop disconnection and dual fuel oven installations. Ability to coordinate and complete the job in two stages. Must bring your own tools and equipment. Location: Gladstone Park Photos: Attached to task Please provide an offer, and let me know your availability to complete Stage 1 as soon as possible. Thank you!