Find professional window and door services in SA

My wife and I would like either some tinting or reflective privacy screening put up on our front door and the small/tall window next to it. Ideally we would like to see through it from the inside but not let people see in from the outside (both morning/night), and also keep light coming in during the day. Photo of frontage attached.

Repair some nail holes make surface good and paint over (supplied) Paint one wall, repair minor damage to two internal doors, make good and paint.

I need a repair specialist to inspect a damaged external door and replace door frame, and frosted side glass panel. The door is jamming, the frame is broken in several areas, and there are a couple of screws sticking out from the frame. I’m looking for someone who can assess the issue, recommend the best fix, and provide a quote after inspection.

I’m looking for someone to drill 2 holes in a brick to install a doorbell. Don’t need help setting it up on the phone just the drilling into the wall

Looking for someone to repair manual door and convert into auto door(supply and installation)

An electronic roller for install on balcony upstairs. Has install video. Need to have electronic roller or blinds install experience.

Back door installed and supplied if possible

1) Require a washing line installed at the property in the backyard 2) Check on front door and bedroom door locks, not engaging properly in the holes.

Doors Hings broken. Need fixing

Have a new internal door that needs to be fitted with hinges and door handle.

I need someone to install a size L pet door into a standard wooden door. I already have the pet door. · Opening size: 25 × 23.5 cm · Pet door is designed for up to 5.5cm thickness · My door is 3cm thick Just want to be upfront about the thickness difference. Please let me know if that's fine and what you'd charge. Thanks

There is a sticky coating on a window we need scraped off

Roller door is Jammed. Needs WD40 or some serious oil. The metal cords holding it are tangled. Location: Morphett vale.

We have a small doggy door, we would like it to be a bit bigger.

Description: Hi, I need help drilling 2 holes into a brick wall near my front door. I’ve tried with my own drill but it’s not powerful enough, so you’ll need a hammer drill and a masonry drill bit (around 6mm). It’s a very quick job (5 minutes max) if you have the right tools.

Need a door handle fitted that came off when guests house sat for us. Screw holes seem to be too small, probably a real quick fix with plugs. 15 minutes or less to estimate

Hi, I’m looking for a handyman/tradie to help with a couple of jobs at my house in North Adelaide. Potential for ongoing work as we’re planning further upgrades. 1. Remove and dispose of backyard awning • Large awning attached under balcony (see photos) • Appears to be fixed to a horizontal bar with a tension cable • Needs to be safely removed and taken away (too large for hard rubbish) • May require 2 people due to size/awkwardness 2. Replace door seals (already purchased) • Remove existing screw-in door seals • Install new compact brush seals (screw-in) • Approx. 4 sets of French doors + 2 standard doors • May require cutting to size (we have a saw if needed)

front door not closing very well, seems to scrape on the floor when closing. Waiting for image from tenant

Door opens inwards to bedroom, which blocks a secondary door inside the room. (poorly designed) Would like door rehung so it opens outwards from the room into the hallway, instead of inwards. Hinges and door handle on the door itself can remain in place as is, as they will be correctly orientated when rehung. Reuse existing door and door hardware. Patch, repair and paint door frame where hinges and strike hole are no longer used on the inside of the room. (Paint colour Lexicon quarter)

Need a door for our Work From Home office. This door need to installed along with frame. Material is on me. I need an expert who can install. I will do paint as well Not a barn slide door I will just supply the door - you have to sort out frame and other items. The door size might need a cut too