Find professional window and door services in Manly NSW

I need a new fly screen to be fitted to my steel security door. This will involve removing the 4 steel strips on either side of the security door, which are held on with pop rivets. Removing the fly screen. Repainting the base cross section , there is a little bit of rust (paint supplied by me). Supplying and installing new fibre glass fly screen with a suitable adhesive around the sides, and reinstalling the steel strips with pop rivets on the four sides. Any old adhesive and/or fly screen to be cleaned off before installing the new fly screen.

We have a welded steel security door, and it needs the fly screen to be replaced. This will entail removing the steel strips, which are pop riveted to the steel frame on all four sides, removing the old fly screen, applying suitable adhesive, and fitting new fibre glass fly screen, and reattaching the steel strips on all four sides with pop rivets. Door is 2,200 x 910mm dimensions. There is a bit of rust on the base section of the door, which will need repainting (I’ll supply paint).

Door hinge is loose making the door scratch on the floor

We require 2 new timber doors for our members changing rooms at our surf club (North Steyne, Manly beach). Find attached pictures of the current doors and lock configuration. The latch system breaks regularly and is no longer fit for purpose. We have just had the wall key-pad installed but require new full height doors with lock mechanism that is key-pad operated only. Could you quote for the following: Removal of the 2 existing doors pictured. Supply, deliver and install replacement full-height doors Door Sizes: 2030 x 810 x 35 (confirm on site). 1 x LH hinge, 1 x RH hinge Door Vents - In lower section of the door, to provide air ventilation Lock Exterior - No handle, Door opens only via the wall keypad Interior - Handle on inside so members can exit change rooms (If Possible) painted to match existing colours. Site is North Steyne Surf lifesaving Club, 95a North Steyne, Manly 2095.

Replace a (shattered) 10mm glass shower door and remove and replace fixed panel. Approx 200cm x 60cm door and 200cm x 30cm panel. Swap the hinges over from glass mounted to wall mounted so door opens from the other side. Luckily, wall and studs behind the shower cubicle can be accessed as it is under the stair cavity. So can determine ideal attachment point to secure new wall-mounted hinges.

The steel handle of the integrated freezer door has detached at the base making it very difficult to open freezer.

Install door handles on bedroom doors and fix tap handle in bath

We need to make usable again a garage door that has been closed for a long time and make it automatic. Would need to check if the one there can be use, otherwise a new one

We need some curtains to be hung in the baby’s room. We also need someone to look at our doors and work out why they are sticking when we open them. This will probably lead to a future job where someone can hopefully fix that problem too!

Have all the tools & things needed, have an extension cord i need hidden in conduit/cover that can run along my walls. Otherwise also have door seals to install on bottom side of door for indoor door insulation

Fixing oven door that does not close properly.

Need help to reinstall double folding doors for a bedroom. The door was taken off for floor installation and painting. The door might need to be cut down 0.5-1 cm.

I have two small towel racks to drill into tiles (2 screws x 4). Also four towel hooks to attach to the back of bedroom doors. The doors are hollow construction and the drill surface is quite thin, so these might need to be glued as well as drilled (2 screws x 4), or reinforced in some way (eg a strip of wood). I also have two carpet strips to attach. All materials are supplied. This is an Airbnb and I will be visiting on the weekend of 20/21 November so sometime on the Saturday would be perfect. I estimate this around 2 hrs work

I need to replace hinges and locks on aluminum doors

An internal door between a living room and store room

I had to take one cupboard door off the hinges to fit my washing machine and I need someone to put the door back on

I want to request a custom Aluminium door. The dimensions are 1.13 m wide by 1.70 m high, and I would like it in a similar style to the attached reference photo. Additionally, I will need the door to include a lock and be compatible with an electric striker, as it will be connected to an intercom system. For now, I only require the door itself, most likely with the lock installed.

Need a handyman to temporarily remove a top-hung sliding door so I can move a dishwasher into place, then reattach the door afterward. Door is on an overhead track. Must be done carefully to avoid damage. Quick job - likely under 30 minutes.

Roller doors is sticky, it needs lifting.

Need a door to be cut down to size and reinstalled, due to floor tiling