Find experienced vinyl flooring contractors in Central London

I'm looking for a flooring specialist to pop a vinyl (LVP) board into place.

Furniture to be moved to the next room and vinyl floor to be laid with underlay. Then furniture to be put back. Room is approx 4.5m x 4.5m. I have the vinyl and underlay. I can also buy the spray adhesive.

I would like someone to remove the flooring in the kitchen area and cut where it separates the dining area and kitchen. Put down a vinyl roll I have.

I am in need of a floorer to help me lay vinyl flooring in my flat. I will provide the adhesive cans and ensure the room surfaces are clean and level. The rooms and sheet measurements are as follows: Living room - 4m x 7m Kitchen - 4m x 2m Corridor - 3m x 4m Bathroom - 2m x 2m Bedroom 1 - 3m x 6m Bedroom 2 - 3m x 4m Please let me know if you have any follow up questions.

I am looking for an experienced flooring installer to install click LVT flooring in my flat. Total area is approximately 38–39 m² across: • Living room • 2 bedrooms • L-shaped corridor Subfloor: Concrete May require minor floor levelling / smoothing in some areas. Subfloor: Concrete May require minor floor levelling / smoothing in some areas. Work required: • Check and prepare concrete subfloor • Minor levelling if required (latex/self levelling) • Install LVT underlay • Install click LVT flooring throughout • Flooring to run continuously through corridor into rooms • Remove existing skirting boards and refit after flooring installed • Install door bars between corridor and kitchen/bathroom • Clean finish around edges Materials: I will supply: • LVT flooring • Underlay • Door bars • Skirting (if needed) • Levelling compound (if required) Installer to bring tools and advise on prep.

Please: Put up old vinyl sheet flooring in the kitchen and clean the floor Lay vinyl sheet flooring (already purchased and ready) in the kitchen Use sealant to seal around the room

Hello we have the new vinyl bathroom flooring that needs to be laid 2m x 2m, cut around toilet. Also would like the shower re siliconed. We have the silicone

Looking for a Professional to put a viny floor down in 3 small bathrooms and a corridor please

I would like to get LVT fitted in my bathroom. The bathroom measurements are 1.8mL 1.8mW I will supply the LVT flooring so please quote for the installation

Hi, I’m looking for vinyl flooring to be laid/fitted in my bathroom. I would like to see some sample pictures of which you can source. The flooring is 1.8m x 1.8m so a 2m roll will suffice. Would ideally like it done either tomorrow or the following day.

I’ve just had a new kitchen installed and would like vinyl flooring laid. I have it ready to go - the space is small measuring approx 2m x 1.40m.

To lay LVT Herringbone flooring in front, two bedrooms and a small hallway.

LVT replacement in bathroom- 4m2 (vinyl bought). Job doesn’t include glue/sealant. Must be fitted.

I have an LVT click floor that was installed three months ago. The floor was not properly levelled. One of the floorboards has now cracked, and there are three small areas where the floor is particularly not level and I fear more cracking. I would like to, if I can, level these sections without changing the entire floor.

I need vinyl to match the grey laminate flooring done in the passage. You can use off cuts I don’t mind as long as it is done neatly. You would need to provide the vinyl flooring. The area will be cleared and prepped of course. Thank you

Small bathroom floor area - 200 cm by 140 cm, need to install vinyl sheet. Adhesive and sheet provided.

Install of 18.5 sq m of vinyl plank flooring - https://www.floorsforpaws.com/pawsafe/pawsafe-domestic-range (Coco style) on 5th March Flooring plywood is already in place and all flooring substrates required (screenshot) are on site, instructions from supplier on method of install: A lot of our fitters use  Ardex feather finish to ensure then don’t ghost through over time. Apply once in plyboard joins, allow to dry and then apply again to ensure the joins are completely level with the plyboard. The planks/tiles can be cut with a Stanley knife (hook or straight blade).  Follow the instructions on the adhesive, you need a A2 Trowel you need the trowel at 60 degrees, apply a thin layer, butt each tile up to the others Use a P131 primer over the plyboard and when dry use FBall F48 adhesive to adhere the planks. The PawSafe domestic flooring needs to be laid into wet acrylic adhesive.  Do not let the adhesive go tacky.

My floor was laid three months ago, but the ground wasn’t levelled properly first. This resulted in a small dent in the flooring in a main walking area. The LVT floorboard has now cracked, unsurprisingly. I want the gap underneath levelling, and the floorboard either replacing, or the split made good.

Lay lino flooring in hallway, total length approx 3meters (width just under 1meter). I will order the vinyl and have it here ready to install. Installing will need to be on a friday daytime or weekend, and you will need to bring your own tools/supplies.

It is a really small bathroom that I need LVT layed in. It is 1.71 x 1.17m. I have the flooring already, underlay as well (not sure if it is needed). The LVT tile can be seen in pictures