Find a sockets and switches installation professional near you

Dimmer switch has stopped working. I have ordered replacement. Also some Switches in kitchen don’t appear to be working/ were not sure what they are attached to.

I need replacement of three sockets which have either become or are becoming stuck

To fit / swap 2 x plug sockets (plastic casing broken by tenant). Plus small plumbing job, remove pipe safely. (I ordered one double plug socket £2 from Amazon arrives tomorrow, didn’t realise I need 2). Please supply 2nd

Electrician Needed – Replacement of 27 Sockets & Switches I’m looking for a qualified, experienced electrician to replace all the sockets and switches throughout my home. someone who has plenty of experience carrying out similar work and can achieve a neat, professional finish. The new fittings require 35mm back boxes, whereas the existing ones are approximately 15mm deep. The wall recesses will therefore need to be made deeper to accommodate them. The walls are solid brick. The house has already been fully decorated, and I’m keen to avoid any replastering or redecorating, so it’s particularly important that the work is carried out carefully, with minimal disruption or damage to the surrounding walls. The new fittings are screwless, and some of the walls are slightly uneven, so extra care will be needed to ensure the faceplates sit as flush and neatly as possible. Fittings to be installed: * 8 × 1 Gang 2 Way Dimmers * 4 × 1 Gang 2 Way Toggle Switches * 1 × 2 Gang 2 Way Toggle Switch * 11 × 2 Gang Double Pole 13A Sockets * 3 × 2 Gang USB A+C Sockets Total: 27 fittings All switches and sockets will be supplied. The electrician will need to provide any necessary back boxes and installation materials. Please only apply if you’re a qualified electrician with relevant experience, and you’re confident you can carry out the work to a high standard safely. Thank you!

Remove 2 small wall lights from their sockets and make whatever is behind them / the electric safe so we can rest furniture against the wall

Hi, I have a few small electrical jobs that need doing at my home in E15, Stratford. Fix 3 small kitchen under-cupboard lights that are dim or not working properly. Investigate and fix a hallway light that isn't working. Disconnect an old doorbell. Fit a new battery-operated Ring doorbell and wedge (no wiring required). Replace 5 single light switch faceplates. Replace 2 double light switch faceplates. Replace 2 two-gang socket faceplates. Optional additional job: If you're also handy with general DIY, I need 2 hammock brackets securely fitted to an external brick garden wall. I'll supply all replacement faceplates, the Ring doorbell, wedge, brackets and fixings. I'm looking for someone experienced and suitably qualified to carry out the electrical work safely. I'd prefer a fixed price for the complete job rather than an hourly rate, so please provide your best all-inclusive quote for the work listed, including labour and any call-out charges. Ideally, I'd like everything completed in one visit. Please quote separately for the optional hammock bracket installation. Thanks!

Need old and dirty extracter fan replacing in kitchen - Need sticking shiwer folding door fixing - Need 3 electric plug sockets putting in -

Need a couple of sockets and a couple of light fittings in my loft.

Need to install 3x electric sockets in the loft next to the light bulbs. There is light and a switch in the loft. Below the loft is a cupboard which has a switch and there are cables running upwards to the loft as can be seen in the pics

Electrician needed – relocate sockets/switches and reroute hanging cables Looking for an electrician for my flat in Hackney. A wall has been removed, leaving the cables for its switches and sockets hanging from the ceiling. I need these safely rerouted and secured, with the switches and sockets fitted in new locations and the completed work tested.

I want a simple pendant light putting up and 4 sockets and one light switch replacing after decorating. They are all the same.

Add in plug sockets. One in the kitchen for a fridge, and some in the bedrooms depending on price. As well as one outside of the house in the front (weatherproof)

I need 8 or so sockets fitted

3 ceiling fittings,4 sockets and 5 switches to be replaced I have all the new ones just need someone to pop them all on for me

3x Shelly 1pm for towel rails 1x Doorbell Transformer 1x Smart Doorbell Tapo D235 1x Power socket 9.15-11.45am, 12.45-3.30pm or 5.30pm onwards Old Jamaica Road SE16 https://shellystore.co.uk/product/shelly-1pm-mini-gen4/ https://www.tp-link.com/uk/support/download/tapo-d235/ https://www.amazon.co.uk/dp/B0GQGH8SLK

Qualified electrician required for lighting alterations in a three-storey house. All existing lights/switches are live and working. Hallway/stairwell switches Replace/reconfigure 4 switch plates using Click MiniGrid + Quinetic for a consistent look, retaining wired switching where practical and adding RF only where needed. Final controls: • GF front door: outside light + GF hallway • GF bottom of stairs: GF hallway + 1F landing • 1F landing: GF hallway + 1F landing + 2F landing • 2F landing: 1F landing + 2F landing GF hallway already has 3-point 2-way/intermediate switching. 2F landing light already has 2-way switching. For the 1F landing light, retain the existing wired 1F switch and add 2 Quinetic RF controls at GF bottom of stairs and 2F landing via a QURWM3 hybrid receiver. Proposed switch kit is NOT YET ORDERED. Please confirm compatibility/quantities before I buy. Work includes: • Confirm existing hallway switching so correct 2-way/intermediate modules are fitted • Install 4 matching faceplates/modules • Install/connect QURWM3 receiver and existing wired 1F switch • Pair/test the 2 RF switches and all lighting No new chased switch wiring between floors. Stairwell wall light Replace existing working fitting with supplied Alabaster Stone Diffuser Wall Light. Allow for drilling/new fixings if needed. Ground-floor hallway light Remove existing working track lighting and install supplied Interiors 1900 Fargo 3-Light Large Inverted Pendant. Requires cable routing approx. 3m across ceiling using cable/wire fishing, with a few strategic access holes if needed. Please minimise ceiling damage. Making good/plastering/painting not required. I supply both light fittings and, once confirmed, switch kit. Please supply normal sundries/cable/fixings. Ladder available onsite. Please confirm experience with 2-way/intermediate circuits, Quinetic/Click MiniGrid, and cable fishing.

Change 4 light switches and 4 lights bulbs. Change switch from touch to dimmer switch

To change over 5 existing light sockets to new 5 light sockets.

Replace 4x double switches for double dimmers