Book a reliable freezer installation and repair service near you

Freezer not defrosted for years. Freezee drawers stuck. Just need help to manage the frost. There is only one power switch for both fridge and freezer

I have an integrated freezer cabinet which is proving tricky to remove.

I’ve integrated a fridge freezer and the outer freezer door (the cupboard door, not the fridge door) has fallen off the hinges because I leaned on it. I need someone to fix it so the freezer door isn’t exposed and looks better. Thanks.

There is a plinth at below the freezer, I'd like some help to remove it and re-install it as well. I will also need to have the appropriate public liability insurance and indemnity insurance

Bottom Mounted Freezer Series 8 SpaceMax 387L door reversal

Need undercounter integrated freezer installing in space where previous one was housed fixed hinged door needs to be connected to the cabinet door

I need someone to replace the compressor start relay/overload device on my fridge freezer. It’s the small black electrical module that plugs onto the 3 pins of the compressor at the back of the fridge. I already have the replacement part that should work. The job is to remove the old relay and install the new one. It’s a Montpellier mff166k model

unable to find the off switch for the freezer, so require a steamer to defrost freezer, and also fix the integrated door that has detached.

Freezer cannot be set at a proper temperature

I need someone to look into my amica fridge freezer. Water is leaking inside and things are being frozen too much

Fridge freezer is no longer cooling ir freezing have tired resetting and cleaning filter turned of for 48 hr and still not working

Door of an integrated freezer has come off the hinges, with the plastic parts broken. Looking for someone to bring parts and reattach the door

Fridge warm the fezzer still cold and light is still working

Need new seal and seal to be replaced on Freezer of Bosch Fridge Freezer model KGV28325GB/01

Integrated freezer door hinge has pulled through the screws.

Plinth Currently, the doors of the fridge freezer doors do not line up with the doors of the cupboard. We need a plinth to be made to raise the level of the frige freezer so fridge freezer doors are level with the cup doors The fridge freezer doors can then be attached to the cupboard doors. Hinges for the cupboard We need to replace the hinges for the cupboard doors (that will be attached to the fridge freezer doors). The screws for the hinges need to be reinforced so they don’t come loose with repeated opening and closing of the fridge freezer doors. The fridge door contains heavy objects (like large bottles of milk) and that puts pressure on the hinges and screws which causes them to come loose over time so they need to be reinforced to prevent that from occuring. Also, we need 10cm cut off a door

Remove old fridge and freezer Install new under counter integrated units

Freezer door alignment is off so the door won’t close fully

Install upright integrated fridge and freezer into pre-existing fitted kitchen, replacing same sized units (which will be gone). Electric supply in place, the main job will be mounting sliding hinge doors, and adjusting height etc. Replacement units are standard size and will fit into existing carcasses.