Find local electrical rewiring electricians in London

I need this lamp rewiring please. Let me know any quote

I would like to move the thermostat, which is connected to my heating, on my wall to a different spot on the same wall. Skilled electrician needed.

Remove existing wiring from 2 lamps and replace with new wiring and plug. There is a push switch on the current wiring and a 3amp circuit plug that both need removing. In place I need simple re-wiring (no push switch) and a regular Uk 3 pin plug (not 3amp). New cable should match the old white fabric covered cable. Replace broken plug on 1 further lamp

I have a vintage standard lamp that needs re wiring

My son pulled the cord out of my wooden table lamp and the wiring has come loose around the switch. The plug also needs to be changed to a UK plug. Lamp needs rewiring to work again.

Table lamp needs rewiring and cable shortening

Remove existing nest thermostat heating link and rewire old Honeywell thermostat on valiant boiler

Connect the empty switch of my 4 gang plate such that it turns and off the extractor fans in my bathroom. Details: I have a switch for the power of my extractor fans in the bathroom and a 4 gang switch for bathroom lights. Both switches are less than a meter apart on the same wall. Currently the extractor fans turn on when their power switch is on and I turn on the main bathroom light. When turning off the main bathroom lights the extractor fans keep running until I use their power switch. Should be an easy job. There already is a whole in the wall to access the back of the 4 gang switch from a previous job.

I’ve tried to hang a new pendant light in our lounge but I must have wired it incorrectly as it tripped the fuse (assume a short circuit). I need someone to check and rewire it, and also to replace the blown fuse in my fuse board.

I have several 1930s lamps with their original bakelite plugs that need rewiring: - 2 dressing table lights - 1 bed headboard light - 1 footlamp And also a double bulb butterfly lamp that has stopped working.

Plug for the iron heats up when in use becoming extremely hot. Think it needs to be rewired.

A few rewiring jobs for a qualified electrician. Mainly swapping single sockets for double 13A sockets and fitting a smoke alarm and extractor fan. To be done by Saturday 2nd August 2025 1. ⁠Fire Alarm Reconnection (Kitchen) Reconnect existing fire alarm system. Ensure full functionality and test for proper operation. 2.⁠ ⁠Lounge – Socket Replacement Remove 2 existing single 13A sockets. Supply and install 2 no. new double 13A switched socket outlets in the same locations. 3.⁠ ⁠Extractor Fan Remove existing extractor fan unit. Install a new extractor fan in same position. (Connect to existing power supply). 4.⁠ ⁠Small Bedroom – Socket Upgrade Remove 1 no. existing single socket outlet. Supply and install 1 new double 13A switched socket outlet. 5.⁠ ⁠Bedroom (2) – Additional Sockets Supply and install 2 no. new double 13A switched socket outlets in Bedroom 2 - Sockets to be surface mounted

Old fuse box replace with modern. Replace secondary cutout fuse box

Small charger/camera needs the USB power cord reattaching

I had someone round to fix a broken socket box, but they were unable to finish the job due to some issues that arose when he took the box off. I'm pasting what he said about it below. Please feel free to ask questions if necessary, and send quotes of your own. Please include in your quote and materials (for example, I still need a new socket box on there) "Hi Dominic, I’ve spoken to one of my team members, and after both looking at the pictures and from what I could make out on my earlier visit, we both believe the cable running from the fridge socket to the hallway socket needs to be rewired to start. Based on this, the electrician will then be able to test if the existing wire will need to be rewired. Both cables are also unearthed, which is dangerous and could cause multiple issues, such as insulation failure, potential shock, or worse."

Provide 2 costs to (a) rewire the complete flat with chasing walls new location of plug sockets, upgrade DB certify works as a new installation (b) I will carry out all the preparation, chasing walls install of new sockets and feed all cables back to the existing DB, This means on the 2nd cost for you to connect all cables to a new DB fitted by yourself and certify.To do this I will need a first visit to leave 1 feed only coming off a MCB to a plug socket so I can then rip out all other cables but still have one source of power to work with for lighting and power tools. The above are part of works based on a bad Tenant causing damage

Rewrite vintage Italian lamps - the fuze broke on one and the other never turned off. Bought at auction. If possible, I’d like to change to English wire, change the light bulb fixture (as currently takes R50 which doesn’t allow for warmer than 2700k) and add a dimmer onto the plug.

2 lamps and a fan are not working. I presume they need new plugs / cords.

Hi- my dog chewed the plug off my pizza oven, I need a new plug and rewiring. Thanks

Rewire a lamp, the wire has come loose in the stand