Find a professional local carpenter in Buckinghamshire

Would like to have an outdoor kitchen made from Timber to go around our bbq, with some shelving. Have a photo of the space and a drawing of what I have in mind with rough measurements.

looking for a skilled carpenter or joiner to fabricate a premium solid-wood desktop only (the height-adjustable frame will be supplied separately by me – FlexiSpot E7 Plus four-leg system). Material: Solid Oak or Solid Rubberwood Finish: Pre-oiled (natural matt finish), all edges with 10 mm radius rounded corners Main feature – Hinged Cable Management Access Panel Centred on the back edge: a 450 mm wide × 150 mm deep rectangular lift-up panel with soft-close hinges. The panel must lift smoothly to reveal a bolted sheet-metal cable trench underneath (fabricated sheet-metal trench would be ideal if you can provide it and bill me for cost). This panel is for routing all main cables (monitor, consoles, laptop dock). Monitor Arm Clamp Position Mark and reinforce the exact centre point on the back edge (directly in front of the hinged panel) for a heavy-duty monitor arm clamp. Triple Flush-Mount Wireless Charging Zone Left-hand side: cut precise recesses for a triple flush-mount wireless charger (phone, watch, earphones). Exact position as shown on the attached schematic. Soft-Close Under-Desk Drawer Right-hand side (under the writing/tablet zone): one soft-close drawer, approximately 450 mm wide. Drawer to be mounted cleanly under the desktop. Mounting for Sit-Stand Frame Pre-drill or provide fixing points on the underside to mount directly onto a FlexiSpot E7 Plus frame General Requirements All cut-outs and edges to be clean, precise, and professionally finished. No visible screws or fixings on the top surface except where the hinged panel meets the desktop. Desktop must be perfectly flat and stable once mounted. What I will supply separately FlexiSpot E7 Plus sit-stand frame Sheet-metal cable trench (if you prefer me to provide it) All electronics, monitor arm, wireless charger modules, etc. Quote request Please provide a fixed-price quote including: Material + labour Any VAT Lead time Delivery/collection option

I have a large crack in one side of a double sided bathroom cabinet that needs replacing.

Hi! I’m looking for an experienced carpenter/joiner to build a bespoke understairs storage carcass with pull-out drawers. I have detailed drawings and measurements ready (see photos). There’s also some inspiration there. What I need: Carcass built to fit understairs space 2–3 pull-out drawers in the lower (sloped) section to maximise storage Full-height cupboard on the right-hand side (this will be used to store a clothes airer and hoover, so needs to remain tall and open inside) Strong, smooth drawer runners Important: I only need the carcass and structural build I will handle doors, painting and finishing myself Happy to supply materials, or discuss if you prefer to source Looking for: Someone with experience in custom joinery / fitted furniture Attention to detail and ability to work to measurements Please include photos of similar work and your availability. Thanks so much 😊

Replace corner cabinet pull out basket shelves

I have a sideboard which I would like to update

Need to build a cabinets. Please note this will inculude building a radiator cover along cabinets from scratch. More details to follow

Install mdf shelves with oak veneer on a dry wall in the living room. Like in the photo

Need handyman to install kitchen cabinet door with measurements

Looking for a skilled, experienced, neat, detail-oriented carpenter to modify a kitchen cupboard for boiler access. At the moment, the boiler can’t be serviced because the unit was built around it without leaving sufficient access. We need: – 5mm clearance on the left side – Access above and below the boiler I’d like the finish to look neat and seamless — ideally the top moulding could be extended as part of the door design. The cupboard currently holds tins of food, so it’s important to maintain its strength after modification.

I need a handyman who can fit a dishwasher and do a bit of carpentry work to create space for the dishwasher to fit in the space provide which is a little bit tight at the moment.

To build 2 x flat pack bathroom cabinets and install into two different bathrooms in a new build house using the correct fixtures and fittings. Both cabinets are without lights/electrics. Photo is for illustration purposes.

We are looking for an experienced carpenter to assemble (or custom build) a wardrobe similar to the design attached in the image. The wardrobe will serve as a functional storage solution with hanging space, shelves, drawers, and compartments for clothing and accessories. Wardrobe Layout & Dimensions: • Overall Dimensions: approx. 236.4 cm (height) x 149.8 cm (width) x 60.4 cm (depth). • Left Section: • Hanging rod for shirts/jackets. • Pull-out trouser rack. • Lower shelves for additional storage. • Right Section: • Hanging rod for shirts. • Set of drawers (5–6 drawers for folded clothes and accessories). • Open shelf space at the bottom and top. • Top Section: • Overhead compartments for boxes/seasonal storage. Requirements: • Ability to construct and/or assemble wardrobe frame and compartments to match provided layout. • Skilled in fitting wardrobe rods, drawer runners, and pull-out trouser racks. • Ensure sturdy finishing and alignment of all sections. • Knowledge of working with MDF, plywood, or similar materials (depending on availability and budget). • Provide tools and fittings required for assembly (unless otherwise agreed). Optional (please specify in your quote): • Supply of materials (wood/MDF, hinges, drawer runners, rods, etc.) or labor-only option if materials are pre-purchased. • Ability to provide advice on best materials and finishes for durability.

We are looking to get our dining table colour changed, pictures of dining table below

Hi! I’m looking for a skilled carpenter/joiner or experienced handyman to help me design and build a bespoke alcove cabinet in my living room, based on a style I love (TikTok: @dot.home.renovation.diary). The alcove is 24cm deep, so the design will include a lower cabinet unit that extends slightly beyond the alcove (to around 35cm deep) and built-in shelving and panelling above, flush with the back wall. I’d like your help with: • Measuring up the alcove and confirming dimensions • Advising me on what flat-pack cabinet or materials to buy (IKEA/Wickes/etc) • Helping source or shop for the right timber, MDF, trim, and panelling • Building the base frame from timber (for a secure and level foundation) • Installing a ready-made or custom carcass (base cupboard ~35cm deep) • Constructing an MDF surround and top frame to create a fully built-in look • Adding tongue & groove panelling to the back wall (I like the Easipanel style) • Ensuring access to wall sockets within the alcove • Adding final trims (skirting, architrave, cornice) for a clean, seamless finish I will paint the cabinet myself, so no finishing required from you (but feel free to advise on prep if needed).

We have a wooden table top which we would like converted into three shelves.

I already have the wood, I have some damaged wood flooring I need replacing. An area of 2x3meter or 10 slabs

Property is in Heath and Reach, just outside Leighton Buzzard. We need a wooden staircase fitting to standard regulations, in order to pass a mortgage valuation. The stairs will be delivered on site and are new from the manufacturer. There are wooden stairs in situ already, which are temporary.

Please paint/ stain decking in garden. Want someone to bring the equipment and with experience (photos) of previous work. Thank you

I need a climbing frame installed. Monkey bars, swing, slide made by Wickey