50 Kitchen Cabinet Makers in England

Repair acrylic (?) corner kitchen cabinet door and scorched boiler cabinet panel - Due date: Before Monday, 6th Dec 2021

Removing old cabinets and installing new ones.

Help installing cabinets and ensuring they are level and justified so that it is ready for the worktop. The walls are not exactly square. All the cabinets are already built and ready. Experience installing IKEA kitchens is required.

A kitchen cabinet door is not closing properly and needs re fitting, also the trim under the dishwasher and washing machine has come off and needs adapting to re fit. Neptune kitchen is all wood so is just a simple carpentry job.

Experienced kitchen fitter. Ideally has had past experience with DIY Kitchens. Looking to remove the 6 cabinets and install 8 cabinets (3 base unit, 4 wall cupboards, 1 tall larder) and the plinth/ side panel around the washing machine. All items come pre assembled. Have not ordered yet (feel free to give other suggestions of where to look) so date to be discussed depending on arrival time.

We need to install a kitchen unit, close to the one we already have. To be more precise the unit is made of 2 cabinets, 80cm and 60cm wide, and of course, the 2 framing panels, on the top and bottom. Regarding the framing panels, they need to be cut on 2 sides (circa 100cm from the width and 1cm from the depth). At the bottom we should also install one light, similar to what we already have on the existing cabinet. Please let me know if you need more info. Thanks Luigi

I currently have mixed match colour laminates in my kitchen I would like the cabinet units in my kitchen changed to a white gloss finish I believe they are vinyl wrapped currently please see the pictures below for further details. I would be grateful if you could provide a quotation including the cost of material please. kind regards Samson

We recently got our kitchen installed but some of the cabinet doors were scratched so I got replacements in from Wren. I now need the old cabinet doors to be removed and the new ones to replace them. Update: There are a total of 16/17 doors and 1 plinth to be installed in the kitchen. See photos of the kitchen which are now attached. I can't take a photo of each individual door but I've taken a few photos to give you an idea of how it is constructed. - Due date: Flexible

We had a dishwasher which broke with a designated space in the kitchen cabinets. We were informed that all dishwashers were standard size and would fit in the space, however upon arrival the new dishwasher does not fit. The space is wide enough at the top but roughly three quarters of the way down the cabinet has either shifted or narrowed over time and will not take the ne one. We need someone who is able to either shave the MDF cabinet back on one side or replace a kitchen component the other side to allow the new dishwasher to fit.

- Installation of pre-assembled kitchen cabinets to walls and floor (including island unit). - Kitchen is in new extension - all first fix plumbing and electrical works have been completed already. - No worktop, electrical, plumbing, or gas services required - installation of appliances will be arranged separately. - Cabinet backboards will need to be cut in a couple of places to accommodate boiler pipes. - Kitchen design and photos attached. - You will need to provide all tools and fitting brackets. - Estimated 1 - 2 days work.

Fit a kitchen cabinet to a stud wall .there is a solid beam above that you could fix the top to and you probably would have to cut the plasterboard out and put a solid beam in for the bottom of the cabinet

Kitchen cupboard doors need repairing possible new hinges

Good afternoon, I would like to turn my cupboard in a pull-out bin area. Sizes of the cupboard are: Width 56cm X Depth 56cm X Height 70cm. We are based in W4, London. Looking forward to hearing from you. Kind regards,   Tiziana & David

I need visor Cooker and one kitchen cabinet to be built on top of it

Repost with updated description: Our Wren kitchen is basically installed (appliances in place, most boards and cabinets installed) but we need further help with the following: add remaining boards (one on dishwasher, 2 cabinet doors, panels around wine cooler and at bottom of kitchen cabinets); In addition, we need some minor plumbing help to get the dishwasher connected to existing pipes in the wall and the sink installed. Tools to be provided by handyman (e.g. for cutting boards, screws, etc.). We would prefer someone that could come help on Friday (5.11) or Saturday (6.11) this week! Due date: Before Saturday, 6th Nov 2022

1. Temporarily remove 2 ovens from oven housing cabinet. 2. Using router or multitool, carefully remove bottom 5mm of cabinet rail. 3. Using router, carefully cut new 5mm rebate in bottom of cabinet rail and new 2mm rebate in top of other cabinet rail. 4. Clean up routs. 5. Replace 2 ovens in housing. 6. Using pin gun and headless pins, along with pva glue, replace 5 cover bead strips.

We have a cabinet door that was never attached in our kitchen as it was left incase we had a dishwasher fitted. We do not want a dishwasher just the door attaching to finish the kitchen and make it more aesthetically pleasing .

To put an IKEA kitchen cabinet on a stud wall there is a solid beam you can fix the top of the kitchen cabinet to

I need someone who can install kitchen cabinets

I've got a brand new built in fridge /freezer delivered. Task needed: The doors needs to be reversed. It needs to be lifted about 3cm so that the existing cabinet doors align and fit the actual cabinet doors to the fridge doors sliders.