Find an experienced plumber in Lidcombe

Plumber Needed – Replace Shower Mixer Cartridge I’m looking for an experienced plumber to replace the cartridge in my shower mixer. I’m not sure whether the existing cartridge is 35mm or 40mm, or whether it is flat or raised, so I’d like the plumber to identify the correct type before replacing it. Bunnings is only about 3 minutes from my house, so if needed, we can quickly go there to purchase the correct replacement cartridge. Please include your labour price in your offer. I’ll pay for the cartridge separately if required. Looking for someone experienced who can complete the job properly and leave everything working and leak-free. Thanks!

Replace shut off valve under sink. I can supply valve

Need to fix leak with the meter tap connected with townhouse. Need a licenced plumber

Hot water working intermittently in kitchen tap. Living in unit. Needing the tap hot water to be fully functioning.

Looking for a plumber to 1. Disconnect our old cylinder gas HWU 2. Install the new Rinnai Instant HWU (B26 model with 50 degrees limited), which we will supply 3. Take away and dispose the old HWU 4. Provide an invoice upon completion -Easy access on the side of the house to the street - Double GPO is available next to the unit Please quote for supply and install all parts, copper pipes, fittings etc.

Need a kitchen tap removing and the new one put in

My toilet tank wont fill water andI need to put water in it manually.i need fix

Need fix the leaking pipe

I need water filter installation bought from Bunnings. Stefani Triple Stage Undersink Water Filtration System

Hi Bill, do you still do plumbing jobs, I tried contacting you over the last few days I would like to replace the basin taps

Need someone to replace my kitchen sink tap

Changing sink tap and reseal the sink

Replace kitchen tap with a similar one already bought. Flexible hoses included. Both cold right isolating valves working perfectly. No leaks anywhere. Existing system working perfectly but tap looks old

Slight water dripping continue after flush which is having wall mounted cistern

Looking for an experienced handyman or plumber to: *assemble completed but needs to have tub and sink hole cut out. * Dispose of existing laundry tub * Install securely into laundry area * Connect existing plumbing and waste pipes * Ensure neat alignment and professional finish * Apply waterproof silicone sealing around edges and joins * Leave area clean and tidy after completion Important: * Experience with IKEA assembly and laundry installations preferred * Must bring own tools * Please advise if any additional plumbing parts are required * Looking for a high-quality, neat finish with attention to detail

Fix hole in pipe in wall.

I need the leaking sink tap uninstalled and a new one installed. I'm not too sure which model to buy and would also like a new model (pull down) from Ikea as attached in the photos. I need someone to inspect my existing tap, to buy the correct model to fit in, and to install it for me. Thanks

Setting up a LG Styler, weight approx 94 KG, 190 CM tall and 60 CM wide. Key requirement: Move the LG styler into position, level the machine and ensure it is safe to operate, main requirement as follow: 1. 4 Carpet spike and 4 leveling stand needed to be installed on all corners of the machine, the machine needed to be leveled after installation. DO NOT lay the machine down on the floor, use a wheelie or tilt the machine to install the leveling stand, move the machine with the wheels at the back of the machine, install the 2 leveling stand on the back of the machine last once final location is confirmed. The front of the machine needed to be tall enough for the drip tray to be installed and remove freely. 2. The bottom of the machine needed to be lifted off the carpet for the drip tray to be installed and remove freely. Another task is to reposition a IKEA sofa bed to the side of the living from the middle, approx 1 meter from current location. Also placing a decorative carpet under bed in the main bedroom. Must be able to pay by credit card, preferably American Express

I want to get jet sprays/ bidggets removed from 2 washrooms

Supply and install 2 bidet toilet spray kits. Works include isolating water supply, installing required valves/fittings, mounting bidet sprays, testing for leaks, and ensuring both units are operating correctly. Installation to comply with Australian plumbing standards.