Find an experienced handyman in Tewantin

Bathroom wooden sliding door is de railed

Renderer wanted, Tewantin Small job at a lowset home in Tewantin. Need 1 window sills knocked off and rendered back flush to match. Must include flashing and sealing at the window bases. Budget up to 300. Send a couple of examples of past work and your quote.

We are moving into a unit in Blakesley Street Tewantin and although will be doing a reno of the kitchen we need to get settled in and sorted out. The issue we have is that our fridge/freezer is slightly too big for the existing fridge gap. I therefore think the short-term option may be to do what I have marked up on the included pictures and cut back the existing shelves and frame by approx. 50mm-100mm and then also cut back the current door by the same which would provide us with enough gap and look ok in the short term. The two small cupboards above the gap would have to also be removed as it is not worth cutting these back. Happy to hear any other ideas and your interest & there will be other tasks however I need to focus on those required right now to get us into the property. Can pay by card or cash. Please find a couple of pic’s that provide a rough idea of what I am thinking however am also open to different opinions & ideas if you wish.

Replace old Rotary clothesline which has ground socket and dispose of it. Install new Rotary clothesline.

3 x apx 2m outdoor blinds will be delivered and you will need to install them in the outdoor space. the blind company says any one with a drill ( which i have all the tools ) and can get things level... ( which im not good at! ) can do this job as a diy. thanks for reading.

I have a safe I want to install into ceiling. I tried to do myself but a little too heavy for one person. Two will make light and safe to get it up. Once up, it just needs 6 screws to hold in place. I have pre-drilled the safe. All up, will be 1/2 hour job. Person needs to be able to get up a ladder and into ceiling space - nothing extreme.

Hang pictures/paintings on wall and instal shower rail and towel rail on tile wall.

Secure Daytek ground mount base with concrete fasteners eg dynabolts or ankascrews

I Need a concrete slab laid for a 3mx3m garden shed. Ground is on a slope so needs to be levelled off

I have the backbone and the base and need to remove the existing raised and install the new rack. Here is a video on what needs to be done https://youtu.be/O7pcbFep4Vs?si=u5efuPVOM2auxxH3

We have a Toyota coaster and would like some solid fly screens on each window. Potentially also the stoppers removed so that the windows can open right up too.

Looking for a handyman at short notice for a commercial kitchen to install a couple of hand towels and soap dispensers. Also need 3 holes in a stainless shelf to run cables through. Lastly we need a Perspex plastic cover to be trimmed off to fit properly over a fridge. Ideally tomorrow morning.

Looking for a handyman tomorrow for a small job in a commercial kitchen that has just been fitted out. See picture. The cord for this fridge wasn’t pulled out to be plugged. Fridge legs need to be winded down so that the fridge can be pulled out from under the bench and plugged in. Then pushed back and winded back up.

A drone is stuck in a tree about 20 meters off the ground. Can anyone help me get it down?

1 x 3m and a 50cm meter rollers to be rehung, new holes as fell down. Also install a 60 cm blind. Suit handy person. Quote required and homeowner will purchase fittings as required.

Plaster 3 hand size holes, 2 in Plaster wall, 1 in door.

Plaster repair 3 hand size holes.

Repair 3 hand size holes in plaster wall.

Repair circuit board on diffuser

Supply and install outside Tap. Tie into existing copper line in bathroom roof with PEX/Copper T-piece & run 10m(8m roof)+ (2m ext.wall) to a wall mount exterior brass tap. All Materials will be supplied by job owner.