20 Gyprock installers in South West Perth

Receive no-obligation quotes from reviewed, rated & trusted gyprocker installer near me in minutes.

I need
In
  • Powered by Google
available now
available now

Best rated gyprocker installers in South West Perth

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

Recent Gyprock Installation reviews in South West Perth

"Guiseppe arrived when he said he would and had the tools to do the job. Such a pleasant person to work with and would not hesitate to recommend him for future work. "

Seal gyprock wall and window. Quote per hour.

$25

"Very happy with the job Michael did repairing my gyprock wall. He was on time, professional and polite. Thank you "

Repair gyprock wall damage

$60

"Punctual, great communication skills, work was done to a great standard. Went out of his way to meet my schedule. 10/10 would recommend "

Manhole delete gyprock

$230

"Craig is awesome at what he does, prompt and friendly. "

Flushing and Finishing Gyprock Wall

$300

"Very friendly. Great job. Happy to recommend. "

Replace gyprock ceiling in bathroom

$300

What's the average cost of a gyprocker installer in South West Perth

$100 - $300

low

$100

median

$180

high

$300

Low, median and high bar chart distribuiton

Average reviews for Gyprock Installation Services in South West Perth

based on 7 reviews

5

7
0
0
0
0

What is Airtasker?

1

Post your task

Post your task

Tell us what you need, it's FREE to post.

2

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

3

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

What does a gyprock installation services include?

Installing or repairing gyprock drywall generally involves assessing your space, measuring, cutting, applying adhesive, hanging, joining, and finishing. But there can be some variation in the method, depending on where your gyprock is being installed. Here are some of the most common drywall installation and repair jobs:

Gyprock wall installation

Installing gyprock walls starts with measuring the wall dimensions and cutting the plasterboard sheet with a knife. Your plasterboard installer will do one sheet at a time, laying sheets of gyprock on the wall studs and attaching with adhesive, then nailing into place. They’ll repeat the process until all gaps are filled with gyprock sheeting, before joining any edges (using angle beads on corners) and coating with Gyprock compounds. Once the compounds are dry, they’ll sand the surface for a smooth finish.

Gyprock ceiling installation

Installing gyprock ceilings involves a similar process to walls, with a few key differences. After measuring and cutting, your installer will then measure and mark locations for electrical wires and fixtures. They’ll cut these holes using a small saw before attaching the gyprock sheets, one at a time, to the ceiling joists with adhesive. Next they’ll screw the sheet into place before moving onto the next sheet, ensuring minimal gaps between sheets. Your installer will use a ladder and will most likely work with a second person to carefully place each sheet on the ceiling. After the ceiling is complete, they’ll join the edges with compounds (up to 3 layers may be required) before sanding smooth.

Gyprock cornice installation

Once walls and ceiling are in place, your handyman will install gyprock cornices to neatly mask the joins. They’ll measure each room along the top of the wall, from corner to corner, to determine the length of each cornice piece. They’ll mark each cornice and cut it to size, using a mitre box to get the right angles for each end. Next, they’ll line up each cornice, checking that the lengths and angles are correct, before applying adhesive and lightly securing them in place with nails. Your installer will apply cornice cement to the corner points where two cornice pieces join and any other gaps. They’ll use a damp sponge to clean off excess cement. After setting to dry for a couple of hours, your handyman will carefully remove the nails and fill holes with more cement, cleaning the area and sanding once dry.

Gyprock repair

Gyprock can wear down over time and is prone to scratches, dents, and holes from everyday use, whether you have active children or need to move around furniture. It’s important to get gyprock wall repairs sorted sooner rather than later so that problems don’t get worse over time. Your handyman will start the gyprock hole repair by cleaning the area and scraping out any excess plaster or debris that may have accumulated. The next step will depend on the size of the hole or issue. Holes bigger than 1cm that go all the way through will need a bridging material (like adhesive fibreglass mesh) installed. This will cover the hole, with a 2-3cm overhang. After applying the mesh, your handyman will apply a layer of fast-setting putty to cover the area. Once it’s dry, they’ll gently sand the area and repeat with a second layer of putty, before doing a final sanding. 

Recent Gyprock Installation tasks in South West Perth

Gyprock ceiling

$150

Bateman WA, Australia

23rd Oct 2021

To gyprock current ceiling hole from a ducted aircon vent and move it somewhere else nearby and cut another hole there. Current hole is about 38cmx38cm. Preferably someone can do this within the next week! Weekdays or weekends possible. - Due date: Before Sunday, 31st Oct 2021

Gyprock and cornice

$250

Palmyra WA, Australia

18th Aug 2021

I need a gyprock the frame for a new door. Roughly 500mm by 2400mm and 800mm by 300mm (each both sides) Will need the cornices replaced too. Happy to discuss price

Coving and Gyprock repair and hatch install

$500

South Lake WA 6164, Australia

15th Apr 2021

I have a 4x2 room. I need coving installed. Around the room. 12 metres approximately. I need an access hatch cut into the ceiling. And I need the ceiling repaired. All holes filled. At home at the moment for 2 weeks. So any time will suit.

Gyprock and Insulation for exposed beam roof

$3,000

Booragoon WA, Australia

16th Feb 2021

I'm looking for someone who has trade experience working with gyprock to install sheets, and cornices and flush the joins. I also need standard insulation to go between the beams. the beams are 600mm apart. Roof appears to be level, but Furring channels might be a better option. No need to cut out the holes for downlights as I already have a sparky, and no need for painter. Just need the roof insulated and gyrocked, ready for painting. In terms of accessibility, One side of the roof has 2nd story flooring directly below it, the other side is open from the first floor, which is approx 6meters from ground to roof. The dimensions below are taken from the perimeter of the space and don't account for the pitch of the roof. The two sides are as follows: Side one- 4000 x 6820 Side two- 4000 x 5510 I'm hoping to get this job done as soon as possible. Please don't send me a cheap quote and then quote higher in person. I can provide as much information as needed, but I would like to select someone who submits a full and accurate quote. Thanks in advance

Ceiling Patched /Gyprock

$300

Melville WA 6156, Australia

16th Dec 2020

We have had some Lights removed from the ceiling and replaced with down lights - and there is several holes to patch. Also will need our Aircon duct, closed off and hole patched.

Gyprock job

$300

Safety Bay WA 6169, Australia

26th Nov 2020

I am removing this brick pillar, I would like someone to repair ceiling and cornicing.

Supply and install Gyprock walls

$1,500

Alfred Cove WA, Australia

27th Sep 2020

I need 4 2x2 (roughly) rooms errected in an office space with a door entry for each room What would you like the handyperson to work on? gyprock walls erected for all 4 rooms, and door way put in with door to each room. The walls will be from floor to ceiling as they need to be closed rooms to minimise noise. Floor to ceiling is approximately 2.5 metres in height The quote must include materials.

Gyprocking

$200

Bateman WA, Australia

3rd Oct 2021

Gyprocking approx 220cm long, 25cm width along pantry wall. See hole in pictures. I presume it is easier to just remove the existing white gyprock with the fan/light and start with new panel? But will leave it up to you to decide. Wanting someone to be able to preferably do this in about 2 weeks or so. Place in bateman.

Ceiling installation Gyprock

$1,500

Beaconsfield WA, Australia

30th Jun 2021

Garage ceiling converted to kitchen 50m2

Join/flush/sand gyprock walls

$300

West Perth WA 6005, Australia

23rd Mar 2021

- Tape and flush joints of installed gyprock walls. 6 wall faces, some with doors, plus small bits of one bathroom. Total wall area approx 50m2. - Sand down joint compound on flushed walls to make surface flat and smooth, with minimal dust, and get surfaces complete and ready for painting. Sanding required on 2 more additional walls, which i already flushed.

Gyprock/sanding

$250

Coogee WA, Australia

4th Feb 2021

Need someone to finish off gyprock filling, sanding and putting up cornice and skirting in one room, and sanding patching a hallway. We’ll provide the materials.

Enclosing a room (gyprock walls)

$2,000

Cockburn Central WA, Australia

1st Dec 2020

Enclosing a room with gyprock walls including ceiling. Rough measurenements 3.7m (w) x 7m (l) x 2.4m (h) Quote to include door (installed)

Gyprock wall

$100

Hammond Park WA 6164, Australia

15th Oct 2020

Close top part of an entry to a room. Currently the access is open from floor to the corniche. Close the top part with an wooden frame and gyprok/ any alternative.1000mm Wide and around 250 mm height.single brick wall. Painting not required.

Replace eve gyprock and repaint ceiling

$5,000

Applecross WA 6153, Australia

14th Nov 2021

My eave Gyprock is rusted and broken due to some water ingress and need replacement. Also there has been some leakage to the ceiling which which require repainting. 1- The eave gyprock is approximately 80cm wide x 2.8m long 2- There is a watermark on bedroom ceiling (2nd and 3d photos) which need repsinting The whole bedroom ceiling is about 16 sqm 3- There is also a water mark on corner of living room which I think about 6 sqm need repainting ( last photo) All the quotes shall be accepted by insurance company to proceed. - Due date: Flexible

Gyprock ceiling repair

$300

South Fremantle WA, Australia

4th Sep 2021

Hole in ceiling. 800mm x 800mm approx needs repair. Small hole gyprock wall also. Easy accesss

Ceiling in laundry to be gyprocked a d plastered

$200

East Fremantle WA, Australia

29th May 2021

Small ceiling area to be gyprocked …. Laundry room. As soon as possible thank you

Gyprock ceiling repairs

$400

Fremantle WA 6160, Australia

23rd Feb 2021

1 room 3.60 x 2.00 ceiling collapsed needs to be replaced including cornice 1 room approx. 3.6 x 2.00 section water damage part of ceiling needs replacement.

Gyprock repair around ranghoood.

$300

Aubin Grove WA 6164, Australia

24th Jan 2021

300mm Ceiling Fan replaced with range hood. Current ceiling is 10mm thick gyprock. Require patching of the hole and around the range hood. Painting optional pending price.

Manhole delete gyprock

$230

East Fremantle WA, Australia

27th Nov 2020

Delete small man hole in landing above stairs. Gyrprock flush and sand

Punctual, great communication skills, work was done to a great standard. Went out of his way to meet my schedule. 10/10 would recommend

Looking for a Gyprocker to flush and sand.

$1,250

Canning Vale WA, Australia

7th Oct 2020

Looking for a Gyprocker to flush and sand only ready for painting. Job located in palmyra. We can supply all material. 20m2 room, 2.1 high ceiling, square edges all corners