24 Gyprock installers in Melbourne

need someone to apply gyprock sheeting to 2 x 3m long 2.8 highwalls which have been built, but not covered. we will cover material costs. - Due date: Needs to be done on Monday, 25th Oct 2021

Need someone to deliver gyprock from Notting hill Bunnings to glen Waverley

Hi, I'm moving out from my apartment and I need someone to fill in the holes in the wall (one hole in living room, one in my bedroom). Then I need someone to disassemble my bed. Bed is from Ikea.

Need to get interior brick wall gyprocked approx 40 sqrm

Two parts: Part A. Hanging of the following: 1. Oil painting in oak frame 120cm x 120cm 2. Oil painting in oak frame 120cm x 120cm 3. Print in oak frame 100cm x 150cm I’ve currently hung them by drilling into the studs but they’re too low. Part B. Repairing some small holes in gyprock where I have made attempts at putting in hooks/screws. Repair only, no need to paint. Experienced repair assistance appreciated. You will have your own equipment and hooks/screws/etc.

Hole from door handle being pushed too hard into wall. Fix so noone can notice

Hi I need my bathroom door fixed I have bought a new door just need it installed and then door handle put in. Aswell as 2 tiny specs 2cm of gyprock on living room wall and main entrance door. Thank you Tamar

Hi, Job is to: Buy, bring and install 3x ready-to-paint timber battens (~40 x 19mm and ~1.8 m long) to studs in a gyprock wall, and wood putty over screws. Relying on your expertise for wood/fastener type. My end goal is to paint white and attach quite heavy vertical shelving system (see attached) and have the ends of battens flush with vertical rails on the ends. I can provide exact measurements for batten length if easier to have them cut to size at timber place, or can cut on site. Upon discussion, I’d probably also like you to come back after I paint to help me install the actual shelving system.

Hey there, my name is Nathan. I need to hire a handyperson to help me in Richmond VIC, Australia. ***No plastering needed - just the sound panel added to the window. Happy for it to simply be stuck with strong tape. What do you need done? Custom sized Gyprock panel put in front of a window and affixed temporarily (i.e. with strong tape) --> to block out the noise of the train coming into the bedroom What is the type of property? House Which areas of the property need work? Bedroom What would you like the handyperson to work on? Soundproofing 1 bedroom window (2m x 2m) with Gyprock Soundchek. And to provide the Gyprock Soundchek board (add to the cost of this inclusive of this quote) You would have to supply the materials and board. It doesn't have to be strongly put on the window - just enough to block the noise and sturdy enough that it won't fall off. Thanks Thanks

We need to repair a hole made to the gyprock / plaster on the wall of our apartment. The hole is approximately 40 cm wide and tall (subject to actual measuring). Job should also include repainting to the same (similar) white matt acrylic paint. Please give us a quote, thank you. Unit located in Melbourne CBD, close to Southern cross station.

Cut out dent and replace small section of gyprock on stairwell. Match paint and paint small patch. Finish needs to be high quality.

We are a commercial facility (fitting out for a gym). We have removed the kitchen that used to love here and we had to pull the wall off (had tiles on it). We are in the process of having the pipes rerouted to behind the metal struts but will need someone to put up another gyprock wall in place & finish it off appropriately (we will paint after b it we just need the sanding done in good order). When putting up the wall we will have a main water valve that will remain on the outside and a couple power points to cut in too. Nothing of note will be getting attached to this wall. It will purely be a plain white wall after with a water cooler in front of it.

I have a small hope about 15 cms diameter that needs to be fixed professionally. Please see picture attached.

We have had wardrobes removed from our bedroom and need a builder/carpenter to assist us in framing up the ceiling and adding gyprock and have ready for a painter to finish off. Please note there is a section where a small bulkhead needs to be framed as we can't remove the exhaust vent which leads outside. So we need to build around that. You will need to supply materials but we will of course pay for the gyprock that's needed. We are attaching some imagery to this task to show how it looks at the moment and what we are envisaging the final product will be (obviously you won't need to paint!). Any questions let us know. - Due date: Before Monday, 13th Dec 2021

Seeking an experienced gyprock finisher / plasterer to help seal up drill holes following taking down shelving. The wall is majority solid brick , however one small square panel is gyprock (see 2 photos - the holes that still have drill traces in the wall) which was slightly damaged during removal (understand there was previously a window in this section). Minimal-to-zero face to face interaction - seeking to complete ASAP (latest Friday 1 Oct). $350 for full finishing/plaster job. $400 if can paint too. Thanks - Due date: Before Friday, 1st Oct 2021

Build 2 frames and Gyprock. Both are 2500mm high (floor to ceiling) x 600mm in length These will be the end of Built in Robes. Job to be completed in next 7 days. It is an empty room, floating floor will be removed, so it is attaching to concrete floor and ceiling, and brick wall Also plaster exposed brick wall and concrete ceiling aprox 17sq mt, and attach 6 mt cornice.

Walls are freshly gyprocked and new cornices. Need undercoat and 2 x top coat. No timber work or enamel needed. Job is 2 small bedrooms. Would like it done ASAP. Please include when you can start in your offer. Quote to include you supplying paint and materials.

Small puncture of the wall need repaired and paint.

Hey there, I need to hire a handyperson to help me in Abbotsford with installing a single 600mm x 250mm floating shelf to a gyprock interior wall. It needs to hold 10kg. I need a single 600mm x 250mm floating shelf fixed to a gyprock wall. There is one steel stud to fix one side to but the other side needs to be fixed with wall anchors that will take 10kg. I have all the fixtures and the wall anchors but I don't have the confidence to complete this job myself as I've never used a drill for fixing things to steel studs before. I'm looking for someone who knows how to properly secure floating shelves to a gyprock wall. This shelf needs to take an 8kg appliance so it needs to hold.

I need to replace a wall in my shop Just partition, wood frame + gyprock It measures 4.5 metres by 3.3 ish metres with a door in the centre I've attached a couple of pictures of the wall in question . To be completed by a reliable and prompt person - I've been stung on here before Looking for quotes and availability Asap prefered Thank you