Find a professional gate installation in Gold Coast

Help to unload 1 sliding gate to our delivery driver and place on the requested location, time around 10 am

Hi, I need an experienced handyman or professional painter to complete an exterior refresh at my property in Runaway Bay. This must be a full-service quote including all labor, premium materials, and tools.Part 1: Metal Gate Painting (1 Item)• Pedestrian Gate: Lightly sand to remove aging surface, and repaint with 2 coats of premium outdoor weatherproof metal paint (matching the existing brown color).Part 2: Timber Sanding & Re-staining (6 Vertical Posts, 4 Angled Braces, 2 Handrails, 2 Ceilings)• Entry Ceilings: Lightly sand/clean and re-stain 2 timber slatted ceilings (above Main Entrance and Pedestrian Gate).• Upstairs (Balcony): Sand and re-stain 1 vertical post and 2 horizontal handrails (1 long + 1 short). Handrails must be smooth with no splinters.• Downstairs & Gate: Sand and re-stain 3 pool area posts, 2 front door posts, and 4 short gate posts. Fill any dry cracks with heavy-duty outdoor timber filler before staining.• North & South Struts: Sand and re-stain 4 angled timber struts (2 with easy access via upstairs balcony onto the tiled roof; 2 at ground level with tight access behind downpipes).Strict Material Requirements (Must be included in your offer):• Timber Stain/Oil: Must use premium brands like Sikkens (e.g., Cetol HLSe/Filter 7) or Cabot's (e.g., Aquadeck/Stain) in dark charcoal/brown to match the existing tone. (No cheap/generic brands accepted).• Gate Paint: Must use premium exterior metal paint such as Dulux (Weathermax/Metalshield) or White Knight (Rust Guard).• Others: Supply high-quality outdoor timber filler, all tools, sanders, drop sheets, and ladders.Flexible with dates. Looking forward to your all-inclusive offers based on the budget. Thank you!

We have a problem with small rocks and dirt getting in the track of our electric gate. I’m thinking we’ll either need to use concrete or mortar or something to ensure the dirt and rocks stop getting in the track, but open to suggestions. You’ll see from the photos - the ground seems to be higher on the road side of the gate. Whether it needs a couple of timber boards or something as a mini retainer, to stop these small rocks getting in the tracks? Open to all suggestions. Thank you

Needing 2 baby gates installed have taken the photo of the brands

looking to have this damaged outdoor metal gate replaced rather than repaired. I’d like someone experienced with metal gates/fencing to measure the opening, remove the existing damaged gate, supply or recommend a suitable replacement, and install it securely. Ideally I’d like the new gate to suit the existing railing/fence as closely as practical. Please let me know whether your offer is for labour only or includes the new gate/materials, and whether you can measure and source the replacement as part of the job. Photos attached.

Budget is for inspection/diagnosis only at this stage. Happy to discuss repair costs separately once the source of the moisture is identified. I need someone experienced to investigate possible water ingress at my house in Runaway Bay. There is brown liquid/staining tracking down a wall joint from the ceiling, plus an existing water-damaged/mouldy section of bathroom ceiling near the skylight. I want the SOURCE identified first — not just simply patched or painted over. Please inspect roof/skylight/plumbing or other likely sources, moisture-test the affected areas and advise what repair is required. Photos attached. Please tell me your trade/experience and whether your offer includes diagnosis only or repair as well.

Concrete front gate with steel door, a drill suitable surface required, may need some screws too.

Hello I have an electric sliding gate that is not opening fully and needs someone to come and take a look at

We’re looking for an experienced aluminium painter or restorer to repair an exterior aluminium door at a property close to the beachfront in Mermaid Beach. The sea air has caused rust/corrosion and paint damage in several small areas. The job would involve: - Removing and treating the affected rust/corrosion - Preparing the damaged areas properly - Touching up and repainting to match the existing finish - Providing or recommending suitable marine-grade/coastal spray paint Budget is $250 plus the cost of paint and materials. We would also consider having the door panels removed and fully powder-coated if this would provide a better long-term result, subject to advice and costing. Please only apply if you have experience repairing and repainting aluminium exposed to coastal conditions. Photos of similar work would be appreciated.

I need you to help me get 3 new remotes for garage and gate please Please accept my offer but advise how much?

Wanting a side gate approx 1.6m wide to secure the backyard for my duplex and secure the entrance to backyard for keeping a dog I will can pay for supplies seperately or also looking at ordering a custom made to be installed

The electric sliding gate is sometimes jamming and randomly stops working. It is solar powered so maybe the panel is u/s? I had the battery replaced and gate serviced June last year. I need this investigated and rectified. I have videos as well if required

Replacement motor for sliding gate

Weld part of trailer as per photos

Gate hinge has broken in the wind and needs to be rewelded/repaired. There is a 240V power source close to the gate for welding equipment. Happy to purchase a new hinge if the existing one can’t be reused. Looking for someone experienced with welding/gate repairs who can get it operating properly again.

Need someone to please purchase and install and outdoor door (to block walkway side of house) Shown in photo After white door with key lock example shown in photo. I’ve used AI to mock up the design

Small gate in backyard needs fixing. It is bolted into boundy fence which is leaning and causing the gate not to close. Need gate bolted onto retaining wall (green circle on photo) instead of fence where it is currently bolted (red circle) so it is straight again.

Latch keeps dropping when door is shut

Will need an angle grinder to cut the 90mm x 90mm posts to size, and a rotary drill to screw posts into masonry wall. 40mm x 40mm Battens are cut to size already. All gate hardware and screws provided. It uses a rail and clip system similar to the first photo. From Eurowood. Also remove and dispose of existing gate. Estimate it will take one person 4 to 5 hours or 2 people 2 hours. Located Broadbeach Waters

Hi, I’m looking for an experienced person to extend my sliding garage gate to allow it to open approximately 80 cm further. The job will likely involve: * Extending the ground track by ~80 cm (steel track) * Extending and aligning the gate motor rack (gear rail) * Repositioning the open and closed limit stops * Ensuring smooth operation and proper alignment after installation The gate is currently motorised and working well — I just need to increase the opening width. An estimated quote includes material. I can send more photos if required or arrange a site inspection if needed. Thanks! Ayman