Find an experienced gas fitter in East Melbourne

Hi, we would like to move our Gas Water Heater to another location at our house. Currently its fitted in the backyard but we want to move it to sideyard, behind kitchen wall. Would need to reconnect Gas and plumbing pipes and close the existing ones. RED highlighted area in photo new location where it needs to be moved.

I have a gas heater that is missing a cover plate just wanted to see if anyone would know how to source and install

We have installed a gas service line to our shop. The gas company has told us we need to install a chain mesh or similar enclosure to secure the gas meter. Please see below their instructions: "The enclosure must be constructed of non-combustible materials, allow for natural ventilation, and be fitted with a provision for a Multinet supplied S43 Gas Industry pad lock. I have attached an example enclosure the gas company has recommended to install. I have also attached a mock of where the enclosure will sit outside of our shop. The enclosure size required is 800mm Wide x 500mm Deep x 800mm High. As long as the front gate is minimum 800mm wide and has openings for ventilation. Top and sides can be solid if preferred. Non-combustible materials only, no timber.

Gas hot water heater keeps turning off.

Install 2nd hand gas heater

Ducted Gas heater not turning on. Thermostat inside the hosue has power, but turning htis on doesn't activate the heater.

Licensed Gas Plumber required! Removal of old bbq and installation of new bbq on an existing built in area - old unit has been disconnected - must bring along own tools - refer to photo for details

I need a licensed plumber to carry out the following tasks. - Cut back and seal off gas pipe (no longer needed) - Water points to be cut back and replace with mini-stops to reduce in length (currently sticking out too much) - Re-position waste point to upright position (trap to be also upright)

Remove and dispose of the existing Rheem Stellar gas storage hot water system. Replaced with a Rheem 26L Gas Continuous flow water heater: 50c model The gas connection will need to be increased from the meter from Rp ½ to Rp ¾ The new system is to be located in the same position as the existing, resulting in minimal pipe work aside from lifting the gas / water pipe work by approximately 1.6m The gas pipe from the meter will need to be changed from ½ to ¾ diameter over a length of 5 meters. The photo shows that the surface to be opened is soil and stones. There are no obstructions making it easy to replace the existing Rp ½ gas pipe.

Remove and dispose of the existing Rheem Stellar gas storage hot water system. Replaced with a RheemPlus 295 gas water heater (Rheem Model Number 854295). Pipe insulation is important to reduce heat loss. Thickest closed cell foam suitable for outdoors is required for external pipes. Please specify the make and thickness in your quote. The new system is to be located in the same position as the existing, resulting in minimal pipe work. Further, it will fit the existing foot print and input pipe dimensions. Access is good. Your quote should include all costs and GST.

Cooktop gas regulator is inaccessible. Requires relocation to an easily accessible location in order to complete mandatory gas safety checks as per AS/NZS5601.1.

Supply and install Flue Cap by certified gas plumber

Burner won't stay lit after releasing the ignition button. The stove top is the Fisher & Paykel 60cm Series 9 4 Burner Gas Cooktop and the issue is the largest burner. Looking for someone to come and fix please :)

Heater fan is not turning on, gas is working. Already changed capacitor and not working.

Looking for someone to assemble this Bunnings Mimosa Outdoor Gas Heater. Comes in several parts.

My Lennox g61mpvt gas heater can not restart after stop. i tried to turn off and turn on the power, the heater can work for a while, then after temperature reached to the setting, heater will stop and not able to restart again, and fan blows cold air. please quote . thanks

The pilot light on our gas heater isn't lighting. Looks like a thermocouple issue (maybe)

Small , silly to ask job but very important ! Our gas unit that works our heating pilot light is out . We need someone to pop in and relight it ( maybe show us while you’re at it so we can do it next time!) no idea how to do it but have had someone do this not long ago It’s literally a two minute job Thanks 🙏🏽

Stove top has not provide gas since moved in. Have tried gas valve for it several times but not work. The apartment has hot water though. Need a licensed plumber come to fix the issue.

Licensed gas fitter needed to disconnect and cap connecting gas pipe to free standing stove. In preparation for kitchen renovation.