Find an experienced flooring expert in QLD

One bedroom to be done have everything here to lay floors

Laminate floor boards supplied. Install only. Needs to be able to complete task with no supervision.

Need someone to remove carpet and install 55 square meters of SPC Hybrid flooring in bedrooms. I have material

Renovating a single level house and require an installer for luxury vinyl planks for approx 105m2 on concrete slab, subfloor prep is required as well to ensure level Flooring and adhesive will be supplied

Due to water damage I'm needing someone to lift carpet, remove all furniture and simple installation of floors simply lock into place there's no glue / underlay needed with floating flooring. Concrete surface and room size 11 square metres. We have all supplies so if you can offer affordable price (for an aged pensioner), and are available ASAP Please reach out. Vicki

I need laminate or vinyl flooring laid in my bedroom it has carpet at the moment I ver concrete it was a garage originally. I want a reasonable quote

We have about 50 square metres of Terra Mater Summit hybrid floor boards to be installed in our house - see floor plans - downstairs in lounge room to the front door, 13 stair nosings and landing, upstairs hallway and one bedroom. We already have the boards, trims and black plastic moisture barrier. The concrete subfloor is level and needs no further alteration; it's ready for black plastic. Timeframe is flexible.

Hi everyone, We're looking for a flooring company (or installer) to supply and install hybrid flooring in our house(around 130sqm). The job needs to be completed urgently between 14-17 July, and unfortunately, these dates can't be changed. We're looking for someone who offers good quality work at a budget-friendly price. Thank you!

Posting on behalf of my parents . I can provide photos if needed with garage measurements

Looking for an experienced flooring installer to install timber vinyl planks to my downstairs area and install matching new nosings and risers to an internal staircase. I’ve included photos of the areas currently and an AI mockup of how i’m wanting it to look. Scope: * Install vinyl planks over existing tiled floor (approx. 36m²) with appropriate primer and adhesive * Cut back existing bullnose stair edges to create a flat, square profile * Install matching stair nosings and risers to stairs * Caulk all perimeter edges, stair stringers and other visible gaps for a neat, finished appearance * Clean, professional finish with neat transitions * Install new floor trim where vinyl plank meets a different tiled floor Stair details: * 12 treads (matching nosings provided, example photo of their profile attached) * 14 risers * 1 landing I will supply: * Vinyl planks * Matching stair nosings * I will also fully clear and clean the floor area ready for you to begin Installer to supply: * Adhesives / primer * Tools and consumables * Caulk Please only apply if you have experience installing vinyl flooring and nosings on stairs. Photos of similar work would be appreciated.

Looking for an experienced flooring installer to install vinyl planks to my downstairs area and install matching new nosings and risers to an internal staircase. I’ve included photos of the areas currently and an AI mockup of how i’m wanting it to look. Scope: * Install vinyl planks over existing tiled floor (approx. 36m²) * Cut back existing bullnose stair edges to create a square profile * Install matching stair nosings and risers to stairs * Caulk all perimeter edges, stair stringers and other visible gaps for a neat, finished appearance * Clean, professional finish with neat transitions Stair details: * 12 treads (matching nosings provided, example photo of their profile attached) * 14 risers * 1 landing I will supply: * Vinyl planks * Matching stair nosings Installer to supply: * Adhesives * Tools and consumables * Caulk Please only apply if you have experience installing vinyl flooring and nosings on stairs. Photos of similar work would be appreciated.

Hi, I've run out of time so am looking for someone more experienced than me to help lay and cut hybrid flooring for one bedroom. The underlay is down. Please have your own saw as I've only got a hand saw and a multi tool.

Need a professional to Lay/Install 30 m² of Hybrid Flooring. Lounge room and small hall. (photo shows the room, but of course it will be completely cleared on the day.) Tuesday, June 2

Help me lay vinyl planks on my floors very small house only doing kitchen living and dining

Must have experience in vinyl sheet flooring installation. I will provide vinyl sheeting and no need for any floor preparation or removal. Just want it lay on top and sealant on edges. Room is approximately 2.27x1.83. This week any day is flexible and early or late start all ok though if you could advise date.

Hi 110m2 hybrid flooring 4.5mm for installation.

Qualified floorboard installer needed for a ensuite (includes a walk in wardrobe). All materials will need to be included. -Floorboards -Underlay -Scotia -Door transition strip. Can organise a day for a quote/consultation and then set up a day for it to be completed. The room will need to be completed to a similar color to the rest of the rooms. Hoping to have one day for consult and day two for work and completion.

I have 9 sq m of hardwood flooring that needs to be laid over new sub floor. It's 12mm tongue and groove hardwood. I have the new boards. I'm after a professional carpenter/ flooring installer. You will need your own secret nailer. If you can sand and Seal too please let me know. Existing is poly matte finish.

Roughly 15-20 m2 out door area of new built. Wanting composite decking done. The asked price is not actual. Will negotiate and come to agreement upon discussion. The dirt in photos will be removed and the ground will be graded. Looking for someone to install the frame and composite decking.

Lounge room and kitchen needed floating floor boards laid materials supplied ready to go.

Measure and quote for sand and polish for timber floors roughly 64 square meters to be done. Located in Kelvin grove.4 bedrooms, 1 hallway and a small office.

The kitchen and living room area need to be varnished and polished. Floor is timber. The area is, Living area - 4200mm x 3600mm Kitchen - 4000mm x 2700mm Please quote the full price for the job with varnish.

I have moved into a property that has badly damaged polished wood flooring and Lino . I am wanting laminate flooring installed or possible fix of existing flooring. I can buy flooring if I know how much I need.

4 bedroom house in Auchenflower, require timber floor repolish

We are looking for an experienced deck builder/carpenter to construct a front deck attached to our tiny home. Scope of works Build a front deck approximately 8.4m x 3m Construct a skillion roof over the deck, with the roof pitched away from the tiny home to maximise our view of the surrounding trees. Timber framing with quality workmanship suitable for long-term outdoor use. Install decking boards (happy to discuss timber vs composite options depending on price and recommendations). Include posts and roof structure. Leave space for future outdoor furniture and entertaining. We are looking for someone who: Is a qualified carpenter or experienced deck builder. Can provide examples/photos of previous deck projects. Is reliable with good communication. Can provide a written quote and estimated timeframe. Is happy to inspect the site before quoting if required. We are time sensitive and we understand it might not work in this timeframe with ordering of supplies and labour. My husband is a handyman and is willing to give a had to reduce time and cost. $10k for material we roughly know so how much is for your labour to help with this project. Location Sunshine Coast Hinterland, QLD. Notes We already have concept ideas and measurements but are open to practical suggestions that improve the design or reduce costs without compromising quality. Please include: Your availability. Estimated timeframe. Whether you are licensed and insured. Photos of similar work you have completed. Looking forward to hearing from you!

I am needing a refresh sand and polish of my beauty salon wooden flooding.

Polish timber floor in hallway and 3 rooms

- sand back and polish the floors of a Queenslander which recently had the carpet removed. 3 beds, kitchen and living room

Sand and polish hardwood floors – approx. 70m² Residential. Looking for an experienced floor sander/polisher to sand and polish hardwood timber floors in a house. Job details: • Approx. 70m² of hardwood flooring • Sand back existing floors • Apply polish/coating finish • Must supply own equipment and materials • Must have experience with timber floor sanding and polishing • Looking for a neat, professional finish Please include in your offer: • Your experience • What coating/finish you recommend • How many coats are included • Estimated time to complete the job • Availability Photos can be provided if required.

I need a Handyman with prior experience with Wooden Floor Sanding/Polishing. I will hire the Sanding machine and supply all materials. The work can be done on or after 10/06/2026.

Timber floor sand and stain to approx 90 sqm of upstairs internal area (refer to the attached plan. Dining area not included) Fill timber and nail holes.

Need to sand and polish the floor in 4 bedrooms

Looking for an experienced floor sander/polisher for approximately 74sqm of narrow hardwood floors in Beenleigh. Areas include kitchen, dining, lounge, hallway and 3 bedrooms. Looking for rough sand, nail hole fill, fine sand and polyurethane finish (preferably matte/water-based). Flexible on timing.

I need to get my Queenslander balcony sand & oiled

I decking Polish front side back side

floors in house are damaged and need to be ground back and polished to a satin finish

Wooden floor sanding polishing 3 bedroom house 150sqm approximately.

Sand polish timber deck and railing

I need an experienced flooring professional for a two-stage job in my kitchen in Aspley (QLD). Stage 1 – URGENT (before 17 Feb): • Remove existing cork flooring and cement sheet underlay • Deal with nails/staples properly • Leave timber boards clean and ready for kitchen renovation This part must be done before 17 February. Stage 2 – After kitchen renovation: • Sand and polish the timber floor • Match the finish to the rest of the house (appears gloss, but to be confirmed) • Open to professional advice on finish type to ensure a good match Area size: Approx. 2.4m x 2.4m What I’m looking for: • Experience with older timber floors • Own tools and sanding equipment • Ability to match existing floor finishes • Clean, professional workmanship Kitchen renovation is underway — sanding/polishing will be scheduled once installation is complete.

I want to polish and varnish my current stair treads. Want them to look brighter, similar to oak color. I've taken all out, twelve in total, dimensions of each are: 900 x 235 x 45 There are some nails and staples due to the carpet I removed. Two of the stairs are partly broken, I attach some pictures so you can see. I have the existing parts and the balustrade if needed. I can bring all the stairs to your place. Thanks

Refinish approx 16m2 of timber flooring. Peroxide markings. Only 2m2 have the drip markings I foolishly let 6% peroxide drip on the floor.

Timber floor repair / sand and refinish small damaged patch I need someone experienced in timber floor repair to inspect and fix a small damaged/discoloured patch on polished timber flooring near the skirting board. The area has surface wear / sanding marks / finish removed, so I need someone who can: assess the damage properly advise whether it needs spot sanding and colour matching re-stain / recoat / refinish the affected section so it blends with the surrounding floor as closely as possible

Looking for someone to sand back and refinish my outdoor timber bench seat, then seal it with a durable natural matte finish. Bench seat is removable and can be taken away to complete off site. I would like pickup and return included. Size Approx 3.0m long x 0.4m wide. Finish required Natural matte, low sheen. Prefer the most durable option for outdoor use. Happy to follow your recommendation, but I am leaning toward a quality exterior decking oil in a natural matte finish for longevity and easy maintenance. Scope of work: - Transport off site - Sand back to an even finish (top and edges, tidy up the ends, bottom if needed) - Prep and clean properly before coating - Apply stain if needed to even out colour, otherwise, clear natural is fine - Apply exterior grade protective finish in natural matte (2 to 3 coats as required, coat all faces including: top, edges, and ends and bottom if recommended) - Return Please include in your offer • Total price including materials and pickup and return • Product system you will use (brand and type if possible) • Estimated turnaround time • Photos of similar outdoor timber refinishing work Timing Flexible, ideally within 7 to 14 days.

Approx 26,60sqm of decking needs to be sanded down and refinished at my place. Divided in 2 different areas (front and back balconies). Easy access, floor level, timber in fair condition, no damage. Please send me an estimate or quote. Needs to be done before end of Jan 2026 but as soon as possible really. Cheers.

We need a floor sanded and refinished in Wynnum - about 14m2

This is just for 1 average sized bedroom. Summary of the jobs that need to be done: 1. Disassembly (partial) of bed and moved to another room - I will help with this 2. Removal and disposal of carpet and crap underneath, I can also help with this 3. Sanding and refinishing the floorboards and finding the correct stain and varnish to match the floorboards around the rest of the house. I will of course pay for the varnish and any materials needed for this. I also have random orbital sander if this helps. The part that I really need help with is refinishing the floorboards after the carpet is removed, and making sure the new varnish perfectly matches the other floorboards in the house.

Full sand and stain required for our original hard wooden floorboards. We have renovated our house and kitchen floor had vinyl so there’s glue and marks to be removed. Cabinets and kitchen will be complete by end of May, so 10th June start date would be good. Realise in person quote will be required prior to starting job.

Kitchen is being renovated and section of floor needs to be removed and replaced to suit new design. We have the material ready to go - Due date: Before Thursday, 29 February 2024

We need carpets ripped up and the floorboards underneath sanded and polished in 3 bedrooms, hallway and loungeroom - Due date: Needs to be done on Wednesday, 7 June 2023

hardwoord floor sanding and sealing