Find a local floorboard profesional in Melbourne

Description: Looking for a carpenter to replace the timber floorboards on the first floor of a heritage terrace in Fitzroy, about 38 square metres. The job: Remove existing skirting boards and keep them for reinstallation. Lift and remove the old floorboards and clear the joists of nails and fixings. Level the joists with packers and minor trimming where needed. Supply and install 19mm Yellow Tongue, glued and screwed, cut neatly around walls, doorways and the stair opening. Refit the skirting boards to suit the new floor level. Remove all waste and leave the area clean. Please note the first floor is up a narrow terrace staircase, so sheets may need to be cut downstairs.

Both chips are about 3 cm

Professional installation of herringbone hybrid floorboards over living/kitchen area, hallway and cupboards 1 study and 1 master bedroom. Total area 62sqm. All floors are currently bare, polished concrete apart from master bedroom has carpet that will need to be pulled up. I can dispose of that. Boards are supplied on site. You will need to bring tools required for installation and removal of scraps/waste from installation.

I need 4 damaged floorboards replaced due to scratches.

Floorboards patch repairs, section of VJ board panelling and window trim replacement, installing door handles and other bits and bobs

Floorboard sanding of two rooms

We have a tiles in the kitchen and entry way that seems to be played over the original floor boards. We would like someone to determine whether this is true and also remove the tiles if so. If you’re also able to do sanding and staining too that would be great. But can find someone else is not. Area is about 4m x 3.6m

Fix chipped floor board.

Looking for someone experienced with decking repairs to fix a small section of composite decking that has warped/lifted and also inspect garden boxing that is starting to rot. With the deck, a few boards have bowed upwards and there is a noticeable gap between boards. I suspect the boards may need to be lifted and re-secured, likely tree caused by tree root.

We have a rotten/split pine floorboard (5 metre length) that we need replaced. We also need the airtasker to source an appropriate piece/s of timber/floorboard. No need to polish afterwards

Need floorboards installed as unsure how to do it. Boards are already purchased, just need carpet removed for new boards but also need new skirting if current ones can't be placed back. Would also like the carpet removed from the apartment if possible. room will be cleared before arrival.

Looking for someone to clean old lino adhesive off an original tiled floor in Brunswick. The lino has already been pulled up, so this is just the glue residue left on the tiles. The tiles are being kept, so this needs a careful, gentle approach: no grinders, floor scrapers or anything that could chip or crack them. I've tested a patch, and the glue comes up well with WD-40 and bicarb soda plus some scrubbing. I just don't have the time to do the whole floor. Happy for you to use that method or your own, as long as it's tile-safe. Details: • Area: bathroom and laundry cupboard • Remove all glue residue and leave tiles clean, with no oily film • Clean up and take away all rubbish and used materials • Bring your own supplies and equipment (a floor polisher with a soft pad is fine)

Looking for an experienced handyman or decking specialist to carefully lift a few sections of timber decking on an upstairs balcony to allow our roofing tradesperson access to clean out the gutters and repair a ceiling leak underneath. Scope of work: • Carefully remove the required decking boards (probably about 15-25 slats.) minimising damage wherever possible. • Boards are currently nailed down, so experience removing nailed timber decking is essential. • Allow time for our roofer to access the area and complete the waterproofing repair. • Reinstall and securely fix the original decking boards on the same day once repairs are complete. We understand some minor damage to the timber may be unavoidable, but would like this kept to a minimum, ideally limited to cosmetic damage that can be remedied with sanding and repainting. Important: This job will need to be coordinated with our roofer, so flexibility to work around their repair on the same day is essential. Please only apply if you have experience lifting and reinstating existing timber decking without causing unnecessary damage.

Two floorboards are damaged and need replaced. The replacement boards don't need to perfectly match (this is coming ahead of a later renovation), but a close stain would be great.

2 Floor Board need repair (see photos) boards are stained need to be replaced

I need to repair these floorboards looking for someone who can help me with these and more coming up

help me sand floorboards . bring your tools. Can help if needed.

Need to remove and install hybrid floor board, at least 9mm 25 sqm apartment unit, 5th floor

Need help fixing the flooring near the fridge area, to get the flooring done properly so that it’s covering the full fridge area. Remove existing if necessary and relay so the flooring will flow properly and not like It’s patched up. Spare boards available for use.

Hi there, I am moving out of my apartment in St Kilda and need a small chip repaired on a floorboard so it passes my final rental inspection. The Problem: It’s a single deep gouge about the size of a fingernail (see attached photos). The dark core of the plank is exposed. The Goal: Fill and color-match the chip so it blends in seamlessly with the surrounding wood grain and matte finish. What you need to bring: You will need to supply your own color-matched repair materials (hard wax kit, laminate repair filler, or professional epoxy) to match the light oak/tan tone of the floorboards. Looking to get this done as soon as possible before my move-out date. Please let me know what materials/method you plan to use when you place your offer. Thank you!