Find a local floorboard profesional in Melbourne

Repair damaged timber flooring I need a damaged section of timber flooring repaired. The photo shows a deep gouge with splintered wood. I’m looking for someone experienced with timber floors to assess the damage and make a durable repair that blends with the surrounding floor as closely as possible. Please include materials and finishing in your quote, and let me know whether the area can be repaired or if part of the board needs replacing. There’s a few little touch ups that need to be addressed.

Loose squeaky floorboards require repair. I know where joist runs. Experienced in this if possible?

About 18 sqm plus 2 steps hardwood flooring that needs to be sanded and varnished in Matt finish

Need board that was added to be replaced with a floor board

Some minor scratches in a few different areas. The floorboards timber is 12 years old. I need it professionally. Done to look like new.

Works needed: 1) Replace the existing floorboards (approx 55sqm) in 1BR apartment in Melbourne CBD (see photos). Likely looking at using laminate floorboards from Bunnings - If old floorboards must be removed, please state in your reply if you include disposal. 2) Replace 2 skirting boards that have water damage, 3m total length We're looking to just refresh the apartment for quick sale. IMPORTANT: When you reply, please provide an itemised quote, with labour and material costs shown separately.

We are looking for an experienced flooring contractor/handyman to remove and replace several damaged timber-look floorboards near an internal doorway. The affected boards have separated/lifted around the doorway and wall edge and need to be replaced so the flooring sits flat and the joints are properly aligned. Scope of works: * Inspect the damaged flooring and confirm the cause of the lifting/separation before replacement. * Remove the affected floorboards carefully without unnecessarily damaging surrounding boards. * Supply and install suitable replacement boards that closely match the existing colour, grain, width and finish. * Cut boards neatly around the door jamb/wall. * Ensure appropriate expansion clearance is maintained around the perimeter. * Refit/finish edges and doorway transition as required. * Dispose of removed flooring and leave the area clean and tidy. Approximate measurements from the attached photos: * Floorboards are approximately 220 mm wide. * One affected section extends approximately 600–620 mm from the doorway/junction. * The longer affected run is approximately 2.2 metres. * Please refer to the attached measurement photos for exact site dimensions. There is noticeable movement/separation particularly at the corner of the door jamb, so we would also like the contractor to advise if there is an underlying issue such as insufficient expansion allowance, damaged locking joints, subfloor movement or moisture before simply installing new boards. Important: Please include in your offer whether materials are included, and whether you can source a close matching floorboard. If an exact match cannot be obtained, please advise what solution you recommend. Photos and measurements are attached for reference.

Timber Floor Sanding, Gap Filling & Minor Repairs Looking for an experienced timber floor sanding professional to complete the final stage of preparation on existing Baltic Pine floorboards. The floor has already been sanded and is approximately 90% complete. This is mainly a finishing and detail-sanding job rather than a full floor restoration. Scope of works: Fill selected larger gaps between floorboards (not all gaps, only the more noticeable ones). Repair/fill a small chipped or damaged section of flooring. Fill and tidy a few larger gaps around doorways, wall edges and transitions where appropriate. Sand under skirting boards, around architraves and in other areas that the main floor sander cannot reach. Remove remaining paint residue and old finish from perimeter areas. Detail sand edges and corners to match the rest of the floor. Complete a final 120-grit sanding pass to leave the floor smooth and ready for sealing. Floor details: Existing Baltic Pine floorboards. Hallway and adjoining areas. Photos attached showing the current condition, areas requiring gap filling, edge sanding and minor repairs. One doorway area has a larger edge gap that may need filling or tidying. Floor is mostly clean and prepared, with only finishing works remaining. Requirements: Experience with timber floor restoration and finishing. Must supply own tools, edge sander/detail sander and materials for minor repairs. Attention to detail is important as the floor will be sealed after completion. Clean up all dust and debris on completion. Please provide a quote, availability and details of your experience with timber floor sanding and repairs. Photos are attached to show the areas requiring attention.

Sand, fix, putty and polish 30m2 of timber floor. This covers hallway, kitchen and dining area. Solvent semi gloss, 3 coats. Not sure if nail punching required. In addition require 3 stairs to be done. Can i get the quote split for stairs and floor.

Replacing flooring that was removed during a recent kitchen renovation. 3 -4 panels

Repair the floating board with replacement floorboard provided

I need 52sqm of flooring sanded and stained.

Two floorboards are damaged and need replaced. The replacement boards don't need to perfectly match (this is coming ahead of a later renovation), but a close stain would be great.

2 Floor Board need repair (see photos) boards are stained need to be replaced

I need to repair these floorboards looking for someone who can help me with these and more coming up

help me sand floorboards . bring your tools. Can help if needed.

Need to remove and install hybrid floor board, at least 9mm 25 sqm apartment unit, 5th floor

Need help fixing the flooring near the fridge area, to get the flooring done properly so that it’s covering the full fridge area. Remove existing if necessary and relay so the flooring will flow properly and not like It’s patched up. Spare boards available for use.

Hi there, I am moving out of my apartment in St Kilda and need a small chip repaired on a floorboard so it passes my final rental inspection. The Problem: It’s a single deep gouge about the size of a fingernail (see attached photos). The dark core of the plank is exposed. The Goal: Fill and color-match the chip so it blends in seamlessly with the surrounding wood grain and matte finish. What you need to bring: You will need to supply your own color-matched repair materials (hard wax kit, laminate repair filler, or professional epoxy) to match the light oak/tan tone of the floorboards. Looking to get this done as soon as possible before my move-out date. Please let me know what materials/method you plan to use when you place your offer. Thank you!

I need somebody who has previous experience to install hybrid clip in floorboards to the ground of my yoga studio. As you can see in the photo we have the floorboards lay out- there’s more to complete the space.