Find professional floating flooring services near you

I have a floating timber staircase that has been stained dark brown and sealed. I would like all timber components of the staircase sanded back evenly to clean, bare timber, ready for a new lighter stain. The staircase has a glass balustrade with black metal fixings. The priority is an evenly prepared surface while preserving the integrity of the timber. Requirements - Dust-controlled sanding (essential). Sanders must be connected directly to professional vacuum/dust extraction equipment. Must minimise airborne sanding dust inside the house as much as reasonably possible. - The glass balustrade, flooring, walls and black metal hardware must be properly protected throughout the work. - Care must be taken not to scratch the glass with sanding equipment or abrasive dust. - Preserve square timber profiles. I do not want the tread edges or nosings rounded over. - Small areas around glass fixings and other locations that can’t be reached properly with a larger sander will need appropriate detail/hand sanding. - No chemical stripping unless discussed and agreed with me beforehand. - Please do not apply any stain, oil, sealer, polyurethane or other finishing product as part of this initial job. - The timber should be left clean and ready for staining. Final sanding grit should be appropriate for stairs and subsequent staining. I am looking for someone who has genuine experience with timber floor/stair sanding or timber refinishing, rather than general handyman sanding. Potential additional work There are multiple opportunities for further paid work if I am happy with the quality of this job. This may include: - Returning to stain and finish this staircase once the new colour/finish has been selected; - Sanding and staining a separate timber staircase in my loft; and - Sanding and staining a separate timber flooring. I would therefore particularly like to find someone experienced in high-quality timber refinishing who I can potentially use for the complete project.

Have some damaged floorboards ( lifting ) and need them replaced

Floorboards to be laid in 3x bedrooms. I have started but im not to handy and time poor. Once done i also need a bunk bed put together

Small bedroom 3 x3. Lay floor boards floating floor. Floor boards supplied.

Quote for the below, supply and install new flooring to downstairs, kitchen, living, hallway. Old flooring will be removed

Lay 20smq floating floor. Rectangle shaped room 9 x 2m. Floating floor supplied

Need a couple of floating floorboards replaced

Showroom floating floor is sagging in sections and needs reinforcing

Lots of scratches and scuffs on the floor and I am looking if it is worth sanding and polishing to remove them and make the floor last longer, or whether I get other flooring. Yes I’m aware that the colour will change slightly when sanded and that is totally fine :) Please see attached house plan. It is for all areas minus the bedrooms, bathroom and toilet

We have a floor that is approx 100 square metres in an new house. Looking for a quote per square metre on installing the floor if we supply the hybrid planks.

Between around 50 sq meters of floating flooring.

Need someone to swap 2 to 3 hybrid floating floorboards between rooms. Pull 2 to 3 floorboards from another room and replace with the affected ones (see attachment).

We have a couple of boards in the corner of the room that have discoloured do to a water spill. We have spare boards to replace them. Must be a professional job.

We have a small section of engineered timber flooring that needs to be lifted and replaced. The subfloor beneath the affected area appears to have dropped, leaving a gap under the boards. We believe the substrate will need to be inspected and re-levelled before the flooring is reinstalled. Seeking an experienced flooring contractor to assess and quote on the repair.

Looking for a quote to replace approximately 5–6 damaged hybrid floating floorboards in an apartment. Replacement boards are already on site and match the existing flooring. The current boards were previously replaced using the wrong thickness (7.5mm instead of 6.5mm), resulting in a noticeable lip between boards. Scope of works: * Remove incorrectly installed boards. * Install supplied replacement boards (6.5mm thickness).

There are about 4-5 sections approx 500cm x 500cm of floating timber spotted gum flooring that needs to be lightly sanded and recoated with a mat top coat. Have materials, coating. Just labour required.

I want to install HYBRID flooring in my apartment living room + bedroom area. I have also given the exact dimensions of the area in the attachment. Need someone to do the complete job including the flooring and installation and removal of old carpet and disposal. The apartment is on Level 5 with lift access. Parking I can provide inside the building parking premises. Dont want any hidden costs so need somebody to do the complete job. And especially who has experience in doing such work in strata buildings to follow the norms. Price should also include the cost of floating tiles. As per my estimation the area is 34sqm. Also uploaded a bunnings flooring for reference only.

Install floor trim under front door to ensure door doesn’t get caught on floating floorboards when they swell with heat and moisture.