98 Fencing Contractors in Sydney Northern Beaches

Build timber handrail, backyard hard rail to be built in the back yard from ground floor to elevated door entrance about 2m height. Also construct fence on the backyard before a semi cloud drop from none timber material. Ideally cheap metal pool fence material. Will send photos on request.

Need installation of a glass pool fence by experienced person. I have all the fence material. See material list. Semi frameless panels between 1400 and 1800 long. 12 posts Post holes need to be core drilled into travertine (I can hire core driller unit if required) Posts cemented in (have grout) Glass panels and gate installed. Terrey Hills.

Motor has gone on my automatic gate. Need supply and install of a new one Avalon beach nsw

Completion of timber slatted timber fence. Posts are in, slats need to be applied (right tools required). Fence height is 1,8m, length approximately 15m long. Materials provided.

Install 1.8m temporary fence around pool, 6m+12m+6m

My wife ran into our driveway gate and it came off cracking the side wood ... I think the side wood panel will need to be replaced ... need someone to fix .. see images

Timber fence around swimming pool has had wind damage and come away from the deck so needs fixing. Have no idea how much it will cost to fix but would like a quote

Approximately 15m of 1800mm existing boundary fence needs to be replaced, ideally hardwood with a ike a treated pine option. Also need to install a 1200x1800 gate with steel posts anchored into existing slab. Many thanks

I have the 1.2 m high chicken wire, ties, and tent pegs. Just need someone to put up fence with cable ties and secure footing with tent pegs on 10m fence face to stop dog getting out. Tight and awkward spot as bush in front of fence.

We need to update internal Balustrades in our unit block. There is about 18 meters of Balustrading required. Currently 1960’s style steel handrail. We are not overly fussy in colour, type and form but must be compliant.

Hello our rear fence was never completed by previous owners. A small section needs to be completed. It has about 4m left. We have material - Pailings. But will need some metal posts to add to quote. It is a concete surface. So needs to continue to be fixed to metal posts.

I need two acorn picket gates replaced 1400 wide by 1000 high. Plus replace a paling side fence 4000 long varying heights from 3000 to 1000

Gate to the side of my house needs to be replaced. Existing is a bit rotten and warped. Would like replaced with something similar.

We want to install a new hardwood fence in place of the current steel one at our house. I would like to keep the existing steel as the structure for rigidity, installing the new fence on-top/arround it. There is approx 27 metres of fencing required, comprised of: 6 x approx 3000mm x 1400mm (front fence sections) 2 x approx 2000mm x 1900mm (front gate sections, making up the one main gate) 1 x approx 5000mm x 1000mm (side fence section) I have added images of the existing fence; one of the front fence sectioms that go between the pillars, one of the front gate, and one of the side fence section. I have also attached some images as examples of the style of fence that we want built. Job is in Palm Beach, and we're ready to go now. Please only make an offer if you're an experienced carpenter with relevant insurances, and can show similar jobs you've previously completed.

Qualified licenced carpenter required to update existing 6x4 deck with more modern wider decking and updating the hand rails and balustrades.

Change where gate is install some new panels to make pool compliant need some experience

Pool Fencing needs to be made Pool Compliant - - Timber railing to be added (Issue 1) Install a 600 timber angle on the horizontal fence railing that is within the NCZ (Please refer to the 600 wedge illustration at the end of this table); and - Adjust height of boundary barrier (Issue 2) Raise the height of the boundary barrier by approximately 100mm by attaching an all-weather material such as a timber railing. This will also result in the lower timber horizontal railing being located outside of the NCZ 5; or  Shield the horizontal railing with 1800mm high timber fence panels. - Repair Gate (Issue 3) It was noted that the latch does not self-latch closed from when resting on the latch. Recommendations:  Service the gate hinges and/ or latch to ensure that it self-latches closed; or  Replace the hinges and/ or latches so as the gate self-latches closed.

Small width fence 6ft tall required to block a small path. Needs a gate or door. Purpose is to create enclosed space for dog

I need approx 15-20m of timber paling fence painted. Cannot be sprayed as gaps are too wide (would create too much mess on neighbours side) so each paling needs to be individual painted. Easy but tedious job.

The wall is 900 in height