Find professional picket fencing services in NSW

Remove old fence and install new picket fence (approx. 10m long), including timber posts, pickets and rails, preferably all in hardwood. The timber posts shall be set plumb and the top of posts shall be shaped to minimise water from pooling. Include concrete footings, suggest that footings should be min.600mm deep x 450mm wide, 25 Mpa concrete. Approx. 30deg. splay at top of footing. Provide 100mm crushed rock (class 2) 20mm at base of footing for drainage. Include all required fixings. Include paint finish, colour to match existing. Note - we are looking for reasonable quotes, but haven't stated a budget in this ad. Thanks!! - Due date: Before Saturday, 15th Jan 2022

Details below. Please find attached proposed front fence / DA APPROVAL for front carport. Scope - Remove existing fence (by others) - 3 sides - Aluminium Picket Fence (white) - Auto sliding gate (1/2 length of frontage for 2 car access) - Can it be connected to google home? Thanks and speak soon. Neil

After a Top/window picket gate (examples attached in photos) size 260cm x 170cm in PVC or wood, to replace existing gate (photos of the current gate attached)

To repair a leaning picket fence (about 20metres) by digging down & cementing/ concreting in five existing wooden posts. - Due date: Flexible

I need my picket fence replaced. It's 4m wide including the existing gate. What's involved: - Remove old fence and gate (easy - falling apart already) - Replace two old posts with five new posts for a 1.2m high fence - Build and hang five new gates - one replaces existing gate, the other four replace existing fence Materials needed: - Posts X 5 - Cement / concrete - approx. 10 linear m of timber for horizontal and cross braces - approx. 15 pickets (I already have 22 new pickets ready to use) - 10 X hinges Preference given to quotes that itemise costs and labour as listed above.

We are sourcing quotes from an experienced person to install a picket fence on the front boundary of our home, in front of a row of trees. Approx. 14m required at approx. 1.2m high. Note we will order and supply materials (but will coordinate this with you as we are not expert). - Due date: Before Friday, 12th Nov

Fix broken wire,run bottom wire ,pull star pickets and get electric fencing going may need to split

Need someone to supply and install white picket fence and path and letter box - Due date: Flexible

Straight one picket fencing post by taking it out, digging a new hole, put cement to ensure it’s straight. Repair the broken picket fencing timber and take out the rusty screw and replace new ones in

Hi Guys, Looking for someone experienced to complete the following job this Saturday at a property in Canoelands NSW 2157 Need fencing and livestock shelter built to keep 4 Shetland ponies as current area they are in is no longer big enough for them. Supply and install the following. Star picket fencing with 4 lines of plain wire and one line of electric tape. Plus solar energiser and installation of 4.2m farm gate to enter this paddock. The area will be 14 meters by 30 meters. Only 3 sides will need to be done as one of the 14 meters will be the existing back fence. See attached picture. Livestock shelter preferably with wooden roof to be built along existing back fence to property. Need the roof to be around 6 by 6 meters. Roofing only and doesn't need side walls. All materials and labour and installation to be included in the job. Only those experienced building similar enclosure and roofing please apply. Thank you so much.

one front picket fence, and 2 small side picket fences. House is heritage listed and the Council have agreed to pay for this job up to $5k. I also need a colourbond boundary fence the cost of which will be shared with neighbour. - Due date: Before Wednesday, 1st Dec 2021

i will buy all the material but need help to erect the fence its 16 metres of fence and the fence height will be 1800 will all be wood and post will need to be set in concrete in the ground I can but everything before hand you just need the expertise and tools I quoted 8 hours but I know if could take longer and we can adjust the price ALSO THE DATE CAN BE FLEXIBLE

There are a couple of loose pickets in my front fence that need re fixing. And the gate latch needs replacing

Just need a replacement of the first pole near the opening of the gate, as it popping out of the ground due to growing tree roots. DO NOT need to replace the whole fence as the whole of the fence is already well secured in the ground. See images of the length and width of the pole. Pole will likely need to be concreted into the ground to secure it. The 1.05m is above ground. Probably need an additional 30cm in-ground. PRICE NEGOTIABLE -

Hi folks, I'd need a skilled handy man to build and replace my broken picket gate. Please quote with all materials including hinges and a simple lock. Dimension: 116 w × 150 h Welcome inspection or more pictures. Asap but can wait. Thanks.

Front timber Picket fence about 12m - Due date: Before Friday, 24th Dec 2021

I have a timber picket fence at the front of my house that needs to be replaced. I will buy the materials required. - Due date: Before Monday, 20th Dec 2021

11.5m x 1.2m high Treated Pine Closed Paling 2 Rail Fence - using 50x50x2.5mm Steel Base Plated Posts bolted to Top of existing Brick Wall Extend Existing Brick Pillars – build up to a total height of 1.8m - each side of new Single Gate, at the interim column in the middle of the wall and at the end column. Match bricks as closely as possible and provide samples 1 x 1.8m Treated Pine Closed Paling Single Gate - to 1.8m Optional Price - New Post Box built into existing wall (or block off and install new post box in the new extended column)

There is a picket fence at my property. I want an arch as shown in the image

Hi i need supply and install picket fence for my front yard. 4.8 meters only