Find a fence installation professional in Parkdale

Hi, we need someone to install a timber gate (we've purchased a reclaimed one. Our house is behind another one so we need the gate installed on a panhandle and a bit of fence built next to it to close it off to the road. We'd like strong timber posts to attach the gate to and a timber-based fence that still lets us see the plants behind it (possibly a 'wire mesh on timber frame' style). We'd then paint the timber ourselves once installed. Thanks - Due date: Flexible

Need fence built with you in kew

I need 2 lengths of fence wire supplied and installed below the bottom panel on my deck. The wire needs to stop my small dog squeezing under the bottom panel of the deck fence and getting into the hedge (as he is doing at the moment!). The length of the deck is 11.5m. Arrows on the photo indicate where the fence wire needs to be installed. Second photo shows the type of fence wire wanted. - Due date: Before Sunday, 29 January 2023

I would like 2 pedestrian gates and a small fence installed in my backyard. 1. A gate and fence installed between either side of the pillar and the side of the house on my back deck. 4.1m of total length (up to 1.5m for the gate and 2.6m of timber fencing). See first photo. 2. A 1.4m timber gate between the posts on the deck (see second photo). Fence to be up to 1.5m high, designed to keep a dog contained. Thank you. - Due date: Before Thursday, 29 December 2022

A side fence of 25 metres needs to be replaced. You will need to remove the old paling fence and build a new paling fence. In addition there is a second paling fence of 5 metres which needs to be replaced with a new paling fence. - Due date: Flexible

broken fence post needs replacing - Due date: Flexible

We need the small bit of fence replaced

Hi, we would like a glass frameless fence to be supplied along with black spigots for our spa. One section of the fence needs to be higher than the rest. Please see the attached plans. Please let me know when the fence can be delivered. If you would also like to quote on install, we may be interested. Thanks

2 fence posts need replacing, as they have gone rotten and snapped at ground level. The job is to supply and install the 2 posts. Posts are 125mm x 75mm x 2m above ground. I'm expecting ~600mm deep holes. No concrete required. - Due date: Flexible

I have a fence which is on a slant due to trees resting on it which I have now cleared out. I am looking at either repairing the fencing posts or replacing it with new. I have no idea on how long it is going to take so have just put a budget based on repair but am flexible depending on how much work is required. - Due date: Flexible

Looking to have a glass spa fence and gate installed. Approx 4.5m across. From house to side fence.

Existing fence in ok condition. however, the original posts were not concreted in and are rotten. Supply 4x new treated pine posts, align fence along boundary, concrete posts in ground, then move existing fence onto it. Pull out and dispose of old posts

Existing fence in ok condition. however, the original posts were not concreted in. Task 1. Supply 4x new posts, align along boundary, concrete in ground, then move existing fence onto it. Task 2. Build low garden bed retaining wall. in front of fixed fence, build low retaining bed, concrete sleeper and gal steel posts. length 10m along boundary.

We need a bit of our fence rebuilt. Looking for a fence similar to the attached please

I require a new timber paling fence to be installed. The fence length is about 8.5m long, and is the side fence i share with my neighbour. We live bayside in Parkdale, so the soil is soft and sandy. There is a staircase on my neighbours property which the existing fence rises and falls over. The timber fence will need to do the same. My existing fence will be removed prior by another company.

I need someone to remove my existing asbestos fence which i share with my neighbour, and replace with a standard timber fence. Will need the asbestos removed from site as well. The fence is 9m long.

I’ve just completed construction of our front gate which we now require to have electric motor installed for opening . Each gate lead is approx 1350mm wide by 1400mm high and weigh approx 200kg each

Outdoor gate required. Wanting to use existing paled fence to cut out and use as the gate.

1.2m high picket fence, with sliding car gate required. 7.62m wide in total

1.2m high picket fence, with sliding car gate required. 7.62m wide in total