Find a fence installation professional in Carnegie

Front Fence Installation – Vertical Slat (aluminum)(10mm gap) + 2 Pedestrian Gates Looking for an experienced fencing contractor to supply and install a front fence for my client. Scope of Work: * New vertical slat fence * Approx. height: 1.5m * Slat spacing: 10mm gap * Finish: White (powder-coated preferred) * Include 2 pedestrian gates (one at each end of the fence) * Full installation required (posts, framing, alignment, etc.) Site Conditions: * No existing fence (clean install) * Easy access Measurements 1500w (gate) 1300w 950w 1270w 805w 1550w 3130w 1000w (gate) 3000w Important: * Do NOT include locks – electric locks will be installed separately * Gates must be prepared/compatible for future electric lock installation Requirements: * Must supply all materials and labour * Proven experience with vertical slat fencing * High-quality, clean finish required Quote must include: * Full breakdown (materials + labour) * Estimated timeline * Gate hardware details (hinges, latch provision only – no locks) This job is for a client, so I’m looking for a reliable subcontractor. Clear quotes and proven experience will be prioritized. The most qualified contractor will be awarded the job.

I have a rear timber fence with 4 rotten fence posts,I need them replaced with 4 galvanised steel ones

1. Replace the section that has fallen over and the part of the fence that remains (Photo 1).Total fence length is approx. 9 m length along driveway. Dispose of old fence . 2. Provide a 2nd quote to replace the 2nd part of the boundary run of approx. 17m (photo 2) Include allowance for removal and disposal. Driveway access as shown in photos.

Need supply and install of double gate on the side of the property. 2.5m wide * 1.8m high.

Need to install an automatic fence. Include cost of motor, posts, rails and other accessories. Need full turnkey offer. Fence opening - 3.1m long * 1.8m high. Can connect to existing fixed fence

Need supply and install of brick fence in the backyard. There is an existing brick fence so this new bricks need to be installed in continuation to the existing bricks fence. See photos for reference.

Need to supply and install the sliding gate in the front. Existing fixed panels will remain, only need the sliding section of the fence including motor, rails and one post

A portion of the existing fence is removed by builder and need to install a new fence for 5m length area

I need gate supplied and installed

White timber fence install. Hampton style. Motorised gate entry for car. 16M wide at front of house in total. Want pedestrian entry gate too. 1.6M tall posts, fence 1.3M high between posts. You need to source timber, treat it and paint after install. Post box unit already purchased needs install into fence.

Please note i would like to get a quote for replacing the fence and gate seen in the image. The Fence might be approximately 5-6 (including the gate) meters or lesser from what i remember. Need to be fixed this week. You would need to bring the material and labour for finishing the job. This is a repost as the previous job expired and i was travelling and could not get back on time. I'm not looking for someone who can finish the job with quality and time, so your past work matters.

Need lattice supplied and installed to my side fence asap. It’s approx 4.5m wide and needs to be 500 high. Something like this: https://www.bowens.com.au/p/criss-cross-treated-pine-cca-square-lattice/?size=1800mmx600mm+&istCompanyId=193f608b-4aa2-44eb-963c-3640fff0d6c9&istFeedId=09a4bca6-d8e8-494b-ac0c-682092c4d233&istItemId=lmrptitxq&istBid=t&gad_source=1&gbraid=0AAAAABxiHSH_kWw4Yggv-8NlhSzIacXBu&gclid=Cj0KCQiA2oW-BhC2ARIsADSIAWoNKvRBI3DOwQov3iGemT-VUAs5c1rxKAV5uAdVLBx6KOLR4hwk7mwaAm-vEALw_wcB&uom=EA%7C1 It’s a low fence and the dog keeps getting out.

Replace timber fence , the length of the fence is 11.5 meter hight of fence is 1.8m

Scope of works : 1. Remove 8.6m of weathered / broken paling fence (see picture), and dispose. 2. Build a new standard 3.2m paling fence from end of brick post to start of brick garage wall (see picture); Height of 1.5m. Use treated pine. 3. Airtasker to supply all materials, labour and equipment. 4. Quote to include all charges, incl Airtasker fees, etc.

Construct a free standing trellis with posts and ~4x tensioned espalier wire rails, approx 10 m long and 2 m high.

I’m trying to get a cost effective fence repair, your quote is a little high for me. Could we perhaps work on a lower cost solution? Alternatively, perhaps I need to install the whole new fence? If you can come and take a look, and discuss the quote, that would be very helpful. I’m in Carnegie.

Hi. I need to have a 22m long fence replaced. Treated wood. In my backyard. Across 3 properties.

Install new fence 4 sections each one is 1.2m, the other three sections are 2.1m.

Existing brick post at front of property has been dislodged from its original position due to a vehicle nudging it. The post measures 48cm x 35cm x 130cm. Scope : - Rebuild post using existing bricks only, for arsthetic reasons. - All other required materials and tools to be supplied by Airtasker.

Replace existing boundary fence with new paling fence. Required height 1.6m. Length – approx. 12.5m. Budget includes supply of materials.