Find experienced local fencing contractors in Perth

Hello I need some general gardening, installation of reticulation and also I would like wires to be installed on all my fences so I can train star jasmine.

demolish old brick cement rendered front fence and cement garden border ...remove all of the existing fence and footings. A skip bin will be available close to the fence being demolished for disposal of all relevant rubbish. Fence length approximately twelve metres and height ranges between half a metre to one metre. Width varies from ten to twenty centimeters The area will be free of any garden and hedge.

Looking for someone to come and repaint the picket fence and get them straightened up and loose ones put back in the ground. Hibiscus tree provides privacy but needs to be cut back off the fence and the garden around it tidied up.

Reinforcement of garden timber post cemented in ground with cement and straighten and steady the large heavy terracotta Ficus pot plant tied to it which is pulling the post out of the ground. Cut back the very tall large Ficus tied to the timber post which is under pressure from the weight and height. Caused by last night storms. The Ficus is in a very large pot plant and will fall over blocking my front door of my 2 story townhouse if not done soon. You will need your own ladder, tools and cement.

Our Garden fence needs to be fixed - Due date: Flexible

Pool lock needs to be adjusted; requiring new hole for repositioning to be drilled in glass gate or fence panel

Current glass-panelled pool fence is to be relocated closer to the pool. Will require new glass panels, owner can supply. - Due date: Flexible

In Balga Dismantle around 20 meters of wood fence and erect new , supplied by us , 29 m

A boundary gate or wall or panel at end of private unit to close off from Strata/common area. Approximately 1.5 metres wide. Pic 2 shows clothes line in common property . Fence / gate needs to be at end of brick unit for safety and security.

Fence blew over, 4 x post snapped at base, similar to photo. Will need to dig out and remove old posts, source and concrete in new ones and refix the existing panels. Will have a fit tradie type to assist with manual labour, just need someone who knows how to meausure and place it all correctly.

Our old wooden fence has come down. We need to get a new colorbond fence installed. The fence is just 7.7m long. Need 1.8m or 2.1m high. Work includes removing all old fence and posts and disposing all rubbish. This work is for a visit and quote for the job.

Hi - storm has damaged colour bend fence. Would need 3 sheets installed on the right, the door is in good shape however just needs a new hinge attachment. The bowed fence part on the left will need a new post I believe and ideally new concrete set set as its cracking at the bottom. Have put costs for labour only - will pay for materials separately.

Small dent and scratched paint in colourbond fence needing repair

Screen line Fence extensions for Colorbond Fences are in a kit and on site (8 qty x 600 x 2350). All parts on site - need installation on existing colorbond fence. Colorbond Post - Post type F 8 X 2.35m fencing lengths. Job in Wembley - flexible on timing.

We are wanting someone to supply and install 1 x plinth to the bottom of our colourBond fence 2380 wide

Install 7.2 meters of colorbond fence. 1.8m tall. Monument colour. Old timber fence will need to be removed but I can dispose of it. No need to include rubbish removal in the quote.

I need a 32 metre run of Colorbond fencing installed along the side boundary between my property and the neighbour’s. I’ve already arranged for the existing fence to be removed, so you’ll have clear, unobstructed access from both the street front and the rear lane. Specifications • Colour & profile: Monument Colorbond panels, standard profile. • Line & levels: The first 13 m climbs approximately 0.5 m (roughly a 2-degree rise). After that, two flat stretches are separated by retained steps of about 0.9 m each, so the fence will need to follow those changes cleanly. • Posts: I’m fine with standard posts—happy for you to recommend whether steel or concrete footings suit the ground conditions best. • Ground & access: Easy vehicle access on both sides; no landscaping obstacles. • Timing: Current fence will be removed in approximately four weeks' time, with retaining being carried out at this stage. Fence install will need to take place after this occurs. Deliverables 1. Supply and install all posts, rails, Monument infill sheets, and caps. 2. Neat transition at the stepped sections so the finished top line looks intentional and level relative to each platform. 3. All post holes concreted to manufacturer specification, site left tidy on completion.

I have three spare panels that need installing in gap. Other tasks are reinforce fence where it is swaying in one place. Also replace rusted section if possible. Remainder of fence in good condition. You will need to supply cement, rails, fixings and posts. I believe colour is woodland or monument but if unavailable I can paint to match later. All weeds and garden debris will be removed from fence line before you undertake task.

Supply and install of 2.1m high colorbond fencing. There is a slight slope in some parts so some under-fence plinthing is required to keep the fence height. The fence backs on to a busy road so we are wanting to maintain the fence height for privacy and noise reduction. Approx 38m of fence, around 1/3 would require under-fence plinthing. We are also wanting a limestone garden wall installed, which i have listed in a separate airtasker ad, but if you can combine the jobs let me know.

Install colourbond fence. Approximately 3.5metres. All panels and post supplied. Straight line easy access

I need 16m of fibre cement fencing removed and replaced by colour bond surf mist fencing. Site is located in Melville, reasonable access and flat-ish.

Upright between two panels has been loosened by wind or vandal. Fence is losing its stiffness and looks like it might topple if left unattended. We are propping it up from other side where it is faced with trellis.

Double colourbond gates 3.5m in total length - wanting to re-position them so that are more in the centre of the rear colourbond fence (for easier access into the backyard from the laneway). Experienced fencing contractor required.

We have a approx 9 metre wooden fence that is about to collapse in our backyard that need replacing with a colorbond fence. I would the old fence removed and new fence installed. The gate there is ok just needs to match up with it as well as a small fence behind granny flat (pictured)

To drill tek screws into a Colorbond fence and attach stainless steel wire to form a lattice

Remove and remove colourbond fence. New fence is 3 x 2.4m high and 1 x 2.1m high colourbond. 3 panels and posts need removing as per photo. The wall to the left will have been removed ready for instalation of the 2.1m high panel. The materials have been ordered so it is just the removal and installation

Collect the items from Bunnings Bayswater then bring to my house and install ecko deck in pool area. Including ensuring the top of screening is cut to align as one seamless piece.