Find experienced local fencing contractors in NSW

I’m looking for an experienced handyman or carpenter to repair my front garden fence. The horizontal timber rails have rotted through and need replacing. The existing vertical wooden slats appear to be in reasonable condition, so ideally I’d like to reuse these rather than replace the entire fence. Scope of work: * Remove the existing rotten horizontal timber rails. * Assess the existing vertical timber slats and determine whether they can be reused. * Supply and install new horizontal timber rails. * Reattach the existing vertical slats securely. * Ensure the finished fence is straight, secure and professionally completed. * Remove and dispose of any old timber. I’m unsure exactly how much work is involved or how long the job will take, so I’m open to advice and a quote following an inspection. What I’m looking for: * An experienced handyman or carpenter who has completed similar timber fence repairs. * Ideally, someone who can provide photos of previous fence repairs or similar projects. * Someone who can advise on materials and the most cost-effective approach. Please include examples or photos of similar work you’ve completed when responding, along with an indication of your availability.

Supply and install I need a colorbond fence built Side of house 25m Back of house 10m Privacy screen 1m Garden beds front of house and back of house using retaining wall blocks Install turf to 5m3 Cover around a storm water

I would like to remove the old hinge, as the gate can not be open freely without pulling the gate upwards. I would like to install two new hinges, to fix this problem. Thanks.

Our timber-paling garden gate has a steel frame. The fence has moved and we can't open the gate. Looking for someone to inspect what has shifted and get it opening, closing and locking properly again, retaining the existing lock if practical. Please quote any additional work or parts for approval before proceeding. Optional extra, quoted separately, is an outdoor keypad lock with code entry from outside and easy opening from inside. Please confirm suitable options and measurements before we choose a lock. We'd prefer a reliable, insured eastern suburbs local we can use again for other house jobs. Photos attached.

Install a garden gate to the backyard

Come my house to look, give me quote for fence

Remove foliage that is leaning on the fence, make fence upright again. I am assuming reusing the existing fence, maybe a couple of verticals posts need replacing

The fence guy installed my gate back to front. I want it to open into the laneway, rather than into my backyard.

Looking for an experienced fencing contractor to complete fencing for the front garden. Scope of work: * Supply and install a brick fence for the front garden. * Supply and install aluminium fencing on top of the brick fence. * Supply and install a matching aluminium gate. * All materials and installation to be included. * Looking for quality workmanship and a neat, professional finish. Please provide a quote, including materials, labour and estimated timeframe. Photos of previous similar work would be appreciated.

Star Jasmine Fence Screening – Handyman Needed Looking for a handyman to help create a simple support structure for existing star jasmine along our timber garden fence. The job would involve: Attaching approximately 3-4 slim vertical timber battens to the existing fence Running 2- 3 horizontal stainless-steel wires above/across the fence for the jasmine to trail along. Helping train/tie the existing jasmine onto the new supports Secure installation suitable for the weight of the plant as it grows I already have some timber battens and will supply the wire/materials as needed. The aim is simply to encourage the existing jasmine to grow higher and across the fence to provide some additional privacy. I have attached a photo and visual plan showing roughly what I have in mind. Very open to suggestions if there is a better or neater way to achieve it.

Keen to get a quote to fit new bottom clamps to pool and garden glass fence panels. 12 panels requires 24 new clamps.

Repair to aluminium powder coated slat fence car gate. 8 slats need rewelding.

Garden gate has come off both top and bottom hinges. Hinges and screws need to be re-attached

Need picket garden fence or rapid fence installation for 15m length

My gate struggles to close. I think I we need to shave off some of the side.

a two year old fence has a 2 meter section that has been damaged and pushed out of line by the growing roots of a pine tree. I need the fence to be repaired. It will require the post that has been pushed to be stood up (which I have tried and failed to do) or replaced with other concreted posts.

I have an existing garden fence panel that needs to be moved circa 400 mm back to its original location. Accidentally moved during a renovation and bow blocks the electrical meter. Holes from original location already there, fence just needs to be taken down then moved back Can be done any day before 29/06/26. Probably 1 hours work. Back gate will be unlocked, no one will be home

Hi! I need someone to install a fence/barrier to block off a section of my backyard in Lane Cove. The area is roughly as marked in the photo – it’s a patch of garden/lawn that I need to keep my large dogs out of while a neighbour’s leak issue is being resolved. What I need: • Purchase and install a grid fence (the type available at Bunnings) to create a barrier around the marked area • It just needs to be sturdy enough to keep large dogs out. • Fence posts/stakes to be secured into the ground Location: Lane Cove, NSW Please include in your quote: • Your labour fee Ideally, for this task, it would be best if you could come to my property first and assess exactly what needs to be done. After that, you could go to the nearest Bunnings, which is only about eight minutes away, purchase the required materials (I will cover the cost of the materials), and then return to complete the work.

Need to fix the fallen garden gate.

I need approx 15m of fencing installed, 1.8m high and it will require some posts to attach the fencing I want on to. I will get all fencing gone before job starts. I need you to supply and install the fencing I have indicated which is the Ekodeck 219 by26mm by 3.6m. This is sold in Bunnings. My budget is firm and i can't exceed. If you cant do it between by budget of $3300 to $3700, kindly do not reply.

We just moved into a property and there’s fences around our home but wanting someone to come and proof them so our dog doesn’t go on walkabout when we are out Located in Nashua

Put together 5 pieces of aluminium fencing. Does not need fixing to a wall.

Dog fence to extend the already existing area.

Rectification of leaning fence 3 linear meters fencing - supply and install new fencing

I’m looking for an experienced fencer to remove my existing fence carefully, keeping the materials in good condition so I can sell them rather than have them disposed of. I’d then like a new fence supplied and installed, ideally in a style similar to my inspiration photo, featuring dark timber posts and rails with black wire mesh panels. I have two dogs: one is tall and can jump, while the other is small and may try to squeeze underneath, so the new fence needs to be high enough and securely fitted along the bottom to help prevent them escaping. My property is approximately 1,166 m², and I’m happy for you to come out, inspect the property, measure up and discuss suitable designs, materials and pricing. I don’t have any materials, as I’m looking for someone knowledgeable who can recommend and supply everything needed. Please let me know your experience and availability for an on-site quote. (Brown fence in the images is the idea & the other image is what my house currently has at the moment)

Put up a temporary dog fence against existing hedge box. Materials provided by owner

I need a secure barrier installed along the base of my existing fence to prevent my dogs and the neighbour's dogs from being able to make contact and/or dig through. There are 3 sections (as per photos): 4m of gravel and 2 garden beds of 4.8m (on a steep slope) and 3.9m. I'm open to recommendations on the barrier type. Quote is for labour only - materials reimbursed separately.

Hi, I’m looking for someone experienced in fencing installation to install a garden fence at my property around Killcare on the Central Coast. The purpose is to create a secure area for our dog and chickens. I have already purchased the main materials, so I’m mainly looking for labour and installation. Fence: • Approximately 30m of fencing • 1.2m high Jack Pro Series Heavy Duty Dog Mesh, already purchased • 15 × 1.7m steel fence posts, already purchased • Posts approximately 2m apart, adjusted as needed • Posts to be driven approximately 50–60cm into the ground • Mesh securely attached to the posts with galvanised tie wire • Bottom of mesh needs to be secured well to prevent the dog digging underneath. (haven't bought anything yet, but looking for recommendation on the day) Important: the land is NOT flat. The garden is uneven and slopes in places, so the fence will need to follow the existing contours of the land rather than being perfectly level. Experience with mesh fencing on uneven/sloping ground is preferred. Gate: • One access gate, approximately 80–90cm wide and 1.2m high • Gate with its own two posts • Secure latch so the dog cannot open it • Happy to use a suitable ready made gate or framed mesh gate Materials already purchased: mesh, 15 steel posts and galvanised tie wire. I can purchase any additional brackets, anchors or gate hardware required. Please quote labour only, ideally with a site visit before confirming the price. I can provide photos of the area.

We bought a fence from Bunnings and to fit it, it is needed a few holes on the wall to install properly.

I would like to install some sort of barrier underneath the existing colour bond fencing so my dog can't dig out and escape. Full fence length is roughly 30m, would need you to supply barrierfor this job too, please advise

Need to supply and install missing fence panel . Same pattern : Color Surfmist

There is two access points to our clothes line. One is behind a pool feature and the other is from behind the garage. There was gates there before. Solid anchor point. Height 1.5 x 1 meter wide approx. supply and install

Looking for someone experienced with Colorbond fencing/gates to: Adjust/repair side gate so it closes and latches properly. Dog-proof gaps underneath existing Colorbond fencing for a very small Chihuahua. Fence is approximately 16 panels × 2.3 m (37 m total). Around 10 panels have gaps roughly 8–12 cm underneath that need blocking. The remaining ~6 panels have smaller/occasional gaps (under ~8 cm) that should only need minor patching. I was thinking treated timber slats/plinths along the bottom, but I'm open to other neat, durable and reasonably priced options. Please include materials and labour in your offer. Wallsend

My balcony has a fence of about 9metres in length. I need to install a Perspex barrier of about 50cm high to prevent my dog from falling off. Job includes purchasing the Perspex and full installation

The post has become unstable so now the sticker won't catch. Also self closer needs replacing

Build a dog fence/ gate from the side of the house to the fence. Just something she can’t jump over. Approx 3 meters

Need part of fence raised

Electric dog fence needs to be fitted/installed around 350 metre property. It’s a Dogwatch 1200FMD. Just needs a handyman

Need someone to put up a temporary mesh fence along my back boundary approx 30 m

Two gaps tightly filled in the fence line

Front yard installation around 5 panels and 2 side gate

Coluorbond fence installation front yard around 5 panels and 2 side gates.

Install gate and fixed panel

Install about 12m of colorbond fencing installed at the same time to match the image

Build a colourbond gate 1.5m wide in this space

We need an experienced handyperson or fencer to install 14 Screenline Standard Fence Extension Kits on top of our existing Colorbond boundary fence. The extensions are needed to raise the fence height so it meets pool barrier compliance. Kit details: 14 kits, each 600mm high × 2350mm wide (slat style), approximately 33m of fence in total Post Type C (to suit Metroll fencing) Colour: Classic Cream (infill, posts and rails) All materials will be supplied and on site. Installation involves fixing the extension posts to the existing fence posts and fitting the slat infill panels and rails, following Screenline’s installation instructions. Important: This fence forms part of our pool barrier and will be inspected by a pool certifier, so the work needs to be neat, secure, and done to the manufacturer’s instructions with no gaps or climbable points. Please let us know: Whether you’ve installed Screenline or similar fence extensions before Whether you’ll bring your own tools (drill, ladders and so on) How long you expect the job to take Happy to answer any questions!

Demolish and remove 39 lm timber fence. Supply and Install Colourbond fence 1.8 metres high with one sleeper underneath. Install 1 Colourbond gate

Our Colourbond fence, which is also a side entry door for the property has been jammed by a screw against the opposite wall. We have been pushing it to hard to lock every time we open it. Now the metal hook attached to the fence is loose and need to be fixed. We need assistance to get rid of jam and fix the hook so that it can be operated smoothly.

I need colorbond fence panels sourced and replaced as per the attached photos. Location is Prospect and access is available any time.

Actual colourbond gate needs to be placed back on existing frame

Experienced Landscaper/Fencer Required – Colourbond Fence I’m looking for an experienced landscaper/fencer to supply and install approximately 50 metres of Colourbond fencing, along both sides of the house. Job details: * Approx. 50m of Colourbond fencing * Both sides of the house * Approximately 1.8m high * Supply and install posts, panels and concrete * Neat and professional finish required * Experienced landscaper/fencer preferred * Please provide your quote, availability and examples/photos of previous work * Labour and materials to be included in the quote Please only apply if you have solid fencing/landscaping experience.

I have an existing Colorbond double gate section approximately 5 m wide that I’d like converted into fixed fence panels. I also need a small section of the existing fixed Colorbond fence converted into a pedestrian gate. The job will require: * Removing the existing double gates * Reusing the existing Colorbond panels where possible * Installing a new Colorbond post between the newly fixed panels * Securing the former gate panels as fixed fence sections * Converting a small section of existing fixed panel into a functional gate * Supply and installation of suitable hinges, latch and other required hardware * Making good/ensuring everything is secure and aligned

supply and install 3 gates on side yards - each is 900mm and supply and install 2 panels almosy 2 meter each panel of fencing

About 5 or so I’m unsure how to estimate the colour bond fence sheets to be replaced Colour bond fence side gate to be fixed with latch I have the brand new latch

Remove existing colorbond panels. (7 sections) Remove pine sleepers. Install concrete sleepers. (Delivery coming Monday morning) Re-install same colorbond fence panels. (Same as in the photo) No materials needed and NOT disposing of the pine sleepers we will take them away. Must be confident in installing fence panels. Area Hinchinbrook

Handyman Needed – Colorbond Pool Fence Repair Looking for a handyman experienced with Colorbond fencing to close a gap in our pool barrier so it can pass a pool safety inspection. Work required: Fully close the existing gap so it cannot be used as a foothold or climbed through. Finish the infill at a 60-degree angle so it is deemed non-climbable Use matching Colorbond sheet, flashing, cover strip or suitable infill for the whole fence panels length (or 30cm inside pool area and 90cm outside pool area) Securely fix to the existing posts/rails with a neat, professional finish. Supply all materials. Colour: Burnished Copper preferred, but black is also fine. Please only apply if you have experience with Colorbond fencing and pool barrier repairs. Photos attached.

You are quoting to install 8 x extension panels on top of colour bond fence My fence is the cottage green one. Photo of extension panels from Screenline pic attached. I already have the 8 x extension panel kits from Screenline.

Hi guys, I need someone professional to build and install a colorbond gate to replace an existing one. Dimensions are 880w x 1820h Im currently completing work on a property which gate needs to be replaced. I would like an all inclusive price. Existing lock to be reinstated. Colour is mission brown Rear lane access to drop off materials however parking would be in front of property so access is very good. Let me know what you need to know I would like it completed this week.

Need someone to assist in securing my yard. Need 1.8m colourbond gate to left hand side of house. (Photo with the monument colour colourbond fence) space is about 1-1.5m wide. Down side of garage need colourbond fence to block from fence to garage (about 1.8m high and 1m wide) needs to be able to be removed. Between house and garage (about 3m wide. 1.8m high) needs to be able to be removed. To do renovations. The corner fence between the new colourbond fence and older style fence I need piece of corner metal drilled into it temporarily until I replace fence (I have done it to the opposite side)

Need to extend colorbond fence by 30 cm in height. Length of work - each fence 2.36 m wide (total 15 fences and 15 colorbond sheets) Each colorbond sheet needs to be cut in 3 pieces and then fitted into frames. All material already purchased and available. Tools and labour needed. Need a handyman with drill machine and cutter for colorbond sheets and to help with the work. Pls quote for tools and labour. Also quote for whole task not individual fences. Mention time constraints if any.