Find trusted local electricians in Brisbane

The air con duct needs to be fixed and a light reattached to a wall

Our electrician won’t be able to do the work due to injury, and need someone to fit the following: 2 x Bathroom Fan Lights 4x Power points 2x flood light 2x outdoor light All just needs connection and fitment, pretty simple jobs as wiring already in place Fan lights need to be set in to ceiling

Installation of air conditioning unit, split system.

I need someone to install down-lights in my double garage? Job Summary – Downlight Replacement • Remove four existing fluorescent fittings • Install evenly spaced LED downlights in place of each fluro fitting. • OK to reuse existing feed from each fluro location. • Each side is switched separately — keep existing switching arrangements. • Existing switch position is fine (no relocation required). • I already have downlights, cable and quick-connects — labour only required. Scope for Quote (labour only): • Removal of old fittings • Marking and cutting ceiling holes for new downlights • Wiring and installing downlights using existing circuits Note: I have a plaster coming through after to patch any hole you make.

Hi, I recently replaced my kitchen halogen downlights with new MR16 LED bulbs, but they are now blinking/flickering. I need a licensed electrician to: Diagnose the cause (likely transformer compatibility) Replace the transformer with an LED-compatible 12V transformer if required Ensure all lights are working properly with no flickering Property is a standard apartment in Brisbane with easy access. Please include your availability and estimated cost (parts + labour) Thanks!

Hookup 4 downlight (supplied) All cables in place. Connect to existing outside light circuit. Entry via manhole in garage. Location , Drewvale.

Start pilot light on heater

We need a licensed electrician to attend our centre to inspect and repair the power point for the commercial dishwasher which has now stopped working. The dishwasher appears fine but the power point is not supplying power. Looking for someone who can come asap. Please quote your call out fee and availability

I need a licensed electrician to replace my 2 x existing AC ceiling fans with new DC ceiling fans that I have already purchased. Scope of work: Remove existing AC ceiling fans (2) Install new DC ceiling fans (already onsite) (2) Remove existing fan speed regulators/dimmer switches Replace regulators with standard wall on/off switches. You have to provide this. (fans will be controlled by remote) Ensure constant power supply to DC fan receivers Make all wiring safe and compliant Test and confirm all fans are working correctly Requirements: Must be a Licensed Electrical Contractor Must provide a Certificate of Compliance / Electrical Safety Certificate upon completion for both fans Details: All fans and remotes are already onsite Ceiling height: standard residential Property type: residential house

Hang Christmas lights – double-storey home (approximately 200m of lights in total) Looking to hire someone to install Christmas lights on my house. I will provide the lights and all clips/fixings. You will need to provide your own suitable ladder\any working at heights equipment you want to use . The highest arch will require around a 3m reach height. Pictures of the house archways and fence attached for reference with lighting path highlighted in red. Approximately 200m of lights in total for: - Ground and first storey archways - Fence line - Lights are front and side only (not at the back of the house) No special trade skills needed, just: - Confident and safe working on a ladder around 3m - Able to plan a neat layout and secure the lights properly Budget: $350 for estimated 6 hours of work. Happy for the chosen person to do a site visit and confirm the quote is sufficient. Please comment with: - Your experience working at heights / with outdoor lights or similar jobs - Whether you can bring your own ladder/equipment - Availability (dates/times)

Put 2 packets of Christmas lights on a tree. 1 packet is already started but I need assistance to finish the rest prior to a work

I’m having a new fence installed and I need a registered electrician to disconnect the exisiting electrical which is mounted on the current fence so the builder can put the new fence in and then reconnect the pump onto the new fence.

Hi there! My light switch button has popped/pushed in and is no longer looking good on the wall. looking for a licensed electrician to fix it. I’m hoping for something budget-friendly and ideally to have it sorted by this weekend if possible. Please let me know your availability and an approximate quote.

Kitchen Powerpoint not working

Need someone to bring the bulb (buy it) and install into lighting fixture. One bulb needs replacing, all others are working. Must have a tall ladder as ceiling is 10ft tall. Bulb specifications are pictured. Fix 2 Ethernet wall plugs (the switch has fallen behind accidentally after pushing it in too hard). Switches work perfectly fine - it’s just the cable has fallen into wall 2-4cm.

Replace smoke alarm battery. High ceiling need tall ladder. Needs to be done today.

Hello, We are looking for a licensed QLD electrician to attend our retail store, on Albert St in the Brisbane CBD, to replace two faulty ceiling downlights. The Issue: Two separate recessed LED downlights on our main sales floor have stopped working. The Job: The task is to supply and install new replacements for both faulty lights. The scope of work includes: 1. Safely accessing the light fittings in the high ceiling (a suitable ladder is required). Approximate ceiling height 3 meters. 2. Diagnosing the fault for each light (likely a failed LED unit and/or driver). 3. Supplying and installing two new, suitable replacement LED downlights and/or drivers. 4. Ensuring the new lights' colour temperature and brightness match the other existing lights. 5. Testing the new lights to confirm they are fully operational. Please note: The successful contractor must be able to source and supply the correct replacement lights as part of their service. The cost of the new lights should be included in your offer. Requirements: - MUST be a fully licensed and insured QLD Electrician. - You must have your own tools, including an A-frame ladder appropriate for a high commercial ceiling. Experience with commercial lighting and diagnosing faults. Location & Timing: Location: 136 Queen St, Brisbane City QLD 4000 (exact location will be provided once the task is assigned). When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the cost of supplying two new standard LED downlight fittings. Thank you.

Change 7 x GU5.3 lights to downlights (already have downlights themselves ready for replacement). Change all light switches over: 8 x 1-gang 6 x 2-gang Not sure on cost, please quote.

The oscillating blade is not oscillating, appears not to be connected, just flopping. Understand price may vary depending on nature of the fault.

Remove old ceiling fan and replace with new one already purchased. Dispose of old fan.