Find trusted local electricians in Sydney Northern Beaches

Looking for a Level 2 Electrician – Service Fuse / Point of Attachment An electrician has diagnosed a fault with the service fuse at the point of attachment (customer side). The property has a 3-phase supply, and one phase appears to have been lost. Symptoms include: Partial loss of power to the house. Ausgrid Electrician advised the issue is a blown service fuse at the point of attachment and that a Level 2 electrician is required to carry out the repair. I'm looking for a quote to: Replace the blown service fuse. Inspect and test for any underlying fault that may have caused the fuse to fail (rather than simply replacing it). Provide an alternative quote to bypass/upgrade the existing fused point of attachment to a more modern arrangement, if recommended. Please include: Confirmation that you're a licensed Level 2 ASP. An estimate of total cost (including materials and labour). Your earliest availability.

Hi there, We just moved into a new rental and it looks like the black plastic insert for our hanging light is broken as it kept pushing out the light bulb. Need the insert to be replaced as don’t know how to do myself.

I require an electrician to install two LED bathroom mirrors. There is a PowerPoint very close to the location of each mirror and diagrams of the mirror installation is provided. I also need the installation of an exterior light with power nearby to the installation location. I will supply the mirror and light fitting.

Install 12 downlights and 3 PowerPoints. Lights and PowerPoints provided. Wiring / cable will need to be supplied by electrician

Require a phone socket installed for NBN connection

I need one (1) smoke alarm replaced in my apartment. The existing unit is a Siterwell Electronics GS518E (twist on, 240V mains connected model). I’m looking for a compliant replacement with a larger diameter than the current ~140mm unit to cover the existing ceiling mark.

Looking for an electrician to complete a small residential job in my apartment. The apartment was built around 2000, so the wiring is relatively modern and I don’t anticipate any major issues. Work required: Light switches and power points + two LED lights replaced, includes - * Replace 11 × double power points * Replace 1 × quad power point * Replace 6 × single light switches * Replace 1 × two gang light switch * Install 2 × two gang LED dimmer/switch combinations * Might need 1 × surface mounting block (bathroom) * Install 2 × new Martec Fino LED ceiling lights, replacing two existing LED ceiling lights (same locations, pretty much the same lights just a bit bigger, no new wiring required ect) I will supply everything, it’s Clipsal Iconic and I think the old ones are HMP: * Clipsal Iconic switches and power points * Martec Fino LED lights * Dimmers * Mounting block I’m looking for: * Licensed and insured electrician * Neat, professional installation * Experience installing Clipsal Iconic products and LED dimmers Preferred, not necessary though Photos of the existing switches, power points and lights can be provided if needed

Need a licensed electrician to replace one broken ceiling downlight. The existing light appears to need replacing. Please supply and install a matching white downlight and ensure it’s working before you leave.

Scope: Disconnect existing damaged glass cooktop, wire in and install the new replacement unit. Benchtop Cutout: No cutting or modifications required. The new cooktop is an exact size replacement for the existing cutout. Materials: I have already purchased the new Westinghouse cooktop. You will just need to supply your standard tools and any minor electrical consumables (wire connectors, etc.) if required. Disposal: Please include the removal and disposal of the old broken cooktop in your quote. (Alternatively: I will handle the disposal of the old unit myself.) Requirements: Must be a fully licensed electrician and able to provide a Certificate of Electrical Safety / Compliance upon completion. Please bring your own tools and safety gear. unit is: WHC643BE

Please only licensed electricians bid on this job. Please include materials in your bid. Job description: Replace 1 halogen light with a standard LED down light. I have included a photo of the general down light we are after. An iron caused a fuse to blow and the light has blown. The other switch on the same switch still works. There is no rush for this job although we are aiming to have it completed this week, 8th-14th June. Please send any questions you have. Thank you.

Need a licensed electrician to replace my existing light switch with a smart switch with wireless switcher. I am placing a cabinet in front of the existing switch and will not be able to access it regularly. The current light switch has two buttons but I am not sure what one of them does as the only need is for the single light in the room.

I would like to replace the light fitting in the bedroom walk-in storage area. We have the old style fluorescent halogen bulb and want to replace the fitting with a led equivalent. It recently tripped the power, I replaced the bulb, but does not switch on, no flicker on bulb.

I am looking for a licensed electrician to install two new ceiling lights and update a light switch to include a dimming function. ​Scope of Work: ​Light Installation: Install 2 x Martec Spectra Oyster ceiling lights. ​Current Status: The old light fixtures will already be removed (taken down for ceiling painting), so there is no removal required. The wiring is exposed and ready to go. ​Switch Upgrade: Replace or modify the existing light switch wall plate to incorporate a dimming function compatible with these new LED oyster lights. ​What You Need to Provide: ​You must be a licensed and insured electrician. ​Bring all necessary tools, standard electrical consumables, and a compatible trailing-edge (or manufacturer-recommended) dimmer module for the switch. ​Materials Provided: ​I will provide the two brand-new Martec Spectra Oyster light units. Date: 6th June Location: Dee Why

One of our lights fittings isn't working i changed the bulbs and it still doesn't work. Was flickering before it went

I need someone to install a small split system. I have the unit here. It’s an easy install with the inside unit above a window and the external unit on the other side of the brick wall behind it. There is already an external PowerPoint in the correct position and there’s a gutter to drain it into right next to the external unit. I’ll supply the split system. You’ll need to bring your tools gas and the connecting hoses.

Need an electrician to connect a stove to mains power. Cable has already been ran and stove is in place. To be done on 27/4, morning Stove: dual fuel falcon

Hi, I need someone to check the wall mount and run electricity up to the tv (or provide a longer cable etc) so the power cable for the tv doesn’t run down the side

Note for your electrician: You need the blue cat 6 cable extended from outside to inside with RJ45 connector at the end and then u also need a powerpoint for the nbn ntd on the same side of the wall. Once this is done the nbn ntd will be connected to the blue cable and ur modem/router from telstra will stay in the same place.

Need to move water heater to the left so it’s close to the wall. Need to cut the toilet waste pipe and reinstall the new toilet closer to the wall (on the right) by about 10cm.